AMDLA1306Q-1R5MT

AMDLA1306Q MOLDED INDUCTOR ™ LLC FEATURES AEC-Q200 Qualified Shielded construction Soft saturation Low DCR per cubic mm Designed for switching frequencies between 100KHz-2MHz Pb ROHS COMPLIANT TOLERANCE (%) IRMS (A) ISAT (A) 0.10 0.22 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 3.3 4.7 5.6 6.8 8.2 10 22.0 33.0 47.0 68.0 82.0 100.0 30 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 60 42 35 33.5 33 31 29 27 25 23 21 19 17 15 14 12.5 11 8 6.5 5.7 4.8 4 3.8 115 105 58 50 46 39 36 33 30 27 24 22.5 21 19.5 18 17 15 9 8 6.8 5 4.2 4 DC RESISTANCE (mΩ) TYP MAX 0.2 0.4 0.88 1.10 1.25 1.30 1.50 1.80 2.20 3.20 3.70 5.30 6.80 8.30 9.80 12 13 31 46 58 82 110 140 0.25 0.46 1.02 1.3 1.5 1.65 1.8 2.2 2.53 3.6 4.2 6.2 8 9.8 11.3 13.8 15.8 35 55 67 100 132 161 TYPE Non-Lead Frame Non-Lead Frame Non-Lead Frame Non-Lead Frame Non-Lead Frame Non-Lead Frame Non-Lead Frame Non-Lead Frame Non-Lead Frame Non-Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame * Please refer to Part Identification section Operating Temperature: -55°C to +155°C with (40°C rise) Irms current. Maximum Part Temperature: +155°C Components Storage Temperature: -55°C to +125°C Tape and Reel Packaging Temperature: -55°C to +80°C MSL: Level 1 MATERIALS Core: Wire: Terminal: Ink: Metal Alloy Copper Tin Plating Black PRODUCT DIMENSIONS 13.5 ± 0.5 2.3 ± 0.3 Bottom View (Lead Frame) 6.2 ± 0.3 Top View Test Conditions Inductance: 100 kHz, 1 V, 0 Adc Humidity Range: 85 ± 2% RH Temperature Rise Current: Current measured at Δ T of 40°C Saturation Current: Current measured at Δ L of 30% Side View (Lead Frame) 4.0 ± 0.3 Front View 2.3 ± 0.3 PART BUILDER Bottom View (Non-Lead Frame) AMDLA1306Q 1R0 M T Series Inductance* Tol. 1 Packaging 2 RECOMMENDED LANDING PATTERN 14.5 2. Packaging: B = Bulk T = Tape and Reel (500pcs/reel) *Refer to Electrical Specification table Side View (Non-Lead Frame) 5.0 1. Tolerance: M = 20% N = 30% 4.7 ± 0.3 INDUCTANCE (uH) AMDLA1306Q-R10NT AMDLA1306Q-R22MT AMDLA1306Q-R47MT AMDLA1306Q-R56MT AMDLA1306Q-R68MT AMDLA1306Q-R82MT AMDLA1306Q-1R0MT AMDLA1306Q-1R2MT AMDLA1306Q-1R5MT AMDLA1306Q-1R8MT AMDLA1306Q-2R2MT AMDLA1306Q-3R3MT AMDLA1306Q-4R7MT AMDLA1306Q-5R6MT AMDLA1306Q-6R8MT AMDLA1306Q-8R2MT AMDLA1306Q-100MT AMDLA1306Q-220MT AMDLA1306Q-330MT AMDLA1306Q-470MT AMDLA1306Q-680MT AMDLA1306Q-820MT AMDLA1306Q-101MT ISO 9001:2015 CERTIFIED GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS @ 25°C PART NUMBER* AEC-Q200 QUALIFIED 12.6 ± 0.2 • • • • • Check Inventory Request Samples 8.0 Dimensions: mm ™ LLC Revised 05/04/20 AMDLA1306Q AMDLA1306Q MOLDED MOLDED INDUCTOR INDUCTOR ™ ™ LLC LLC RECOMMENDED REFLOW PROFILE 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL TSMAX TL TSMIN Ramp Down Preheat 1 2 25 t 25˚C to Peak Time ZONE DESCRIPTION 1 Preheat 2 Reflow 3 Peak Heat TEMPERATURE Tsmin ~ Tsmax 150°C ~ 200°C TL 217°C TP 260°C TIMES 60 ~ 180 sec. 60 ~ 150 sec. 10 sec. MAX ™ LLC Revised 05/04/20 AMDLA1306Q AMDLA1306Q MOLDED MOLDED INDUCTOR INDUCTOR ™ ™ LLC LLC PACKAGING Tape and Reel: 500 Units per Carton: 4,000 T&R per Carton: 8 Weight per Carton: 27.1 kg Weight per Unit: 5.5 g Carton Dimensions: 410 x 325 x 415 mm TYPE A B C D 13” x 24 mm 24.4 +2/-0 100.0 ± 2.0 13.5 +0.5/-0.2 330.0 B0 14.1 ± 0.1 A0 12.9 ± 0.1 K0 7.0 ± 0.1 P W F T D 16.0 ± 0.1 24.0 ± 0.3 11.5 ± 0.1 0.35 ± 0.05 1.5 ± 0.1 Dimensions: mm This product is commercial off-the-shelf (COTS) and not specifically designed for automotive, military, aviation, aerospace, implantable, life-dependent medical or safety applications. This product is not recommended for use in any application requiring high reliability in which component failure could result in loss of life and/or property damage without prior written approval from Abracon. Specifications are subject to change without notice. Contact Abracon for more information. ™ LLC Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 Revised 05/04/20