AMDLA3010S-100MT

AMDLA3010S MOLDED INDUCTOR LLC FEATURES • • • • ELECTRICAL SPECIFICATIONS @ 25°C INDUCTANCE (uH) TOLERANCE (%) IRMS (A) ISAT (A) 0.15 0.22 0.33 0.47 1.0 1.5 2.2 10.0 20 20 20 20 20 20 20 20 8.0 7.0 6.0 4.0 2.8 2.4 1.8 0.9 12 11 10 7.0 5.0 4.0 3.5 1.4 DC RESISTANCE (mΩ) TYP MAX 9.3 11 15 22 40 54 87 380 12 14 18 25 48 65 100 430 ROHS COMPLIANT ISO 9001:2015 CERTIFIED GENERAL SPECIFICATIONS TYPE Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame * Please refer to Part Identification section Operating Temperature: -55°C to +125°C with (40°C rise) Irms current. Maximum Part Temperature: +125°C Components Storage Temperature: -55°C to +125°C Tape and Reel Packaging Temperature: -20°C to +65°C MSL: Level 1 MATERIALS Test Conditions Inductance: 1 MHz, 1 V, 0 Adc Humidity Range: 65% RH Temperature Rise Current: Current measured at Δ T of 40°C Saturation Current: Current measured at Δ L of 30% Core: Wire: Terminal: Ink: PART BUILDER Metal Alloy Copper Tin Plating Black 1R0 M T Series Inductance* Tol. 1 Packaging 2 1. Tolerance: M = 20% 2. Packaging: B = Bulk T = Tape and Reel (4,000pcs/reel) *Refer to Electrical Specification table 3.4 ± 0.2 0.7 ± 0.3 Top View Bottom View 0.8 ± 0.2 AMDLA3010S Front View Side View RECOMMENDED LANDING PATTERN 2.0 4.2 1.2 Dimensions: mm LLC Revised 09/16/19 1.3 ± 0.2 PRODUCT DIMENSIONS 3.0 ± 0.2 AMDLA3010S-R15MT AMDLA3010S-R22MT AMDLA3010S-R33MT AMDLA3010S-R47MT AMDLA3010S-1R0MT AMDLA3010S-1R5MT AMDLA3010S-2R2MT AMDLA3010S-100MT Pb Shielded construction Soft saturation Low DCR per cubic mm Designed for switching frequencies between 100KHz-5MHz Automotive option available upon request • PART NUMBER* Check Inventory Request Samples AMDLA3010S MOLDED INDUCTOR LLC RECOMMENDED REFLOW PROFILE 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL TSMAX TL TSMIN Ramp Down Preheat 1 2 25 t 25˚C to Peak Time ZONE DESCRIPTION 1 Preheat 2 Reflow 3 Peak Heat LLC TEMPERATURE Tsmin ~ Tsmax 150°C ~ 180°C TL 230°C TP 250°C+0/-5°C TIMES 60 ~ 120 sec. 30 ~ 40 sec. 10 sec. MAX Revised 09/16/19 AMDLA3010S MOLDED INDUCTOR LLC PACKAGING Tape and Reel: 4,000 Units per Carton: 32,000 T&R per Carton: 8 Weight per Carton: 12.0 kg Weight per Unit: 0.32 g Carton Dimensions: 360 x 360 x 400 mm TYPE A B C D 13” x 12 mm 12.4 +2/-0 100.0 ± 0.5 13.0 +0.5/-0.2 330.0 B0 3.8 ± 0.1 A0 3.4 ± 0.1 K0 1.5 ± 0.1 P W F T D 8.0 ± 0.1 12.0 ± 0.3 5.5 ± 0.1 0.3 ± 0.05 1.5 Dimensions: mm This product is commercial off-the-shelf (COTS) and not specifically designed for automotive, military, aviation, aerospace, implantable, life-dependent medical or safety applications. This product is not recommended for use in any application requiring high reliability in which component failure could result in loss of life and/or property damage without prior written approval from Abracon. Specifications are subject to change without notice. Contact Abracon for more information. LLC Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 Revised 09/16/19