AMDLA4012Q-1R0MT

AMDLA4020Q MOLDED INDUCTOR FEATURES • • • • • AEC-Q200 Qualified Shielded construction Soft saturation Low DCR per cubic mm Designed for switching frequencies between 100KHz-5MHz ELECTRICAL SPECIFICATIONS @ 25°C PART NUMBER* INDUCTANCE (uH) TOLERANCE (%) IRMS (A) ISAT (A) 0.12 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 22 20 20 20 20 20 20 20 20 20 20 20 20 20 20 12 11 9.0 8.5 7.0 5.5 4.0 4.2 3.0 2.2 2.4 1.8 1.2 0.9 17 15 13 8.0 7.5 7.0 5.4 4.2 3.5 3.2 2.6 2.1 1.6 1.4 AMDLA4020Q-R12MT AMDLA4020Q-R22MT AMDLA4020Q-R33MT AMDLA4020Q-R47MT AMDLA4020Q-R68MT AMDLA4020Q-1R0MT AMDLA4020Q-1R5MT AMDLA4020Q-2R2MT AMDLA4020Q-3R3MT AMDLA4020Q-4R7MT AMDLA4020Q-6R8MT AMDLA4020Q-100MT AMDLA4020Q-150MT AMDLA4020Q-220MT Check Inventory Request Samples DC RESISTANCE (mΩ) TYP ISO 9001:2015 CERTIFIED Pb ROHS COMPLIANT GENERAL SPECIFICATIONS TYPE MAX 4.2 5.0 7.0 8.0 7.79 9.5 9.2 14.0 11.2 13.5 17.0 21.0 22.0 26.0 31.5 38.0 47.5 55.0 56.7 70.0 114.0 138.0 170.0 190.0 220.0 275.0 277.0 460.0 AEC-Q200 QUALIFIED Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame * Please refer to Part Builder section Test Conditions Inductance: 1 MHz, 1 V, 0 Adc Humidity Range: 65% RH Temperature Rise Current: Current measured at Δ T of 40°C Saturation Current: Current measured at Δ L of 30% Operating Temperature: -55°C to +125°C with (40°C rise) Irms current. Maximum Part Temperature: +125°C Components Storage Temperature: -55°C to +125°C Tape and Reel Packaging Temperature: -20°C to +65°C MSL: Level 1 MATERIALS Core: Wire: Terminal: Ink: Metal Alloy Copper Tin Plating Black 0.76 ± 0.3 AMDLA4020Q 1R0 M T Series Inductance* Tol. 1 Packaging 2 2. Packaging: B = Bulk T = Tape and Reel (3,000pcs/reel) *Refer to Electrical Specification table Bottom View 1.8 ± 0.2 1. Tolerance: M = 20% Top View Front View Side View RECOMMENDED LANDING PATTERN 4.95 2.3 PART BUILDER 4.0 ± 0.2 4.4 ± 0.2 2.16 Dimensions: mm Revised 10/09/20 2.0 ± 0.3 PRODUCT DIMENSIONS AMDLA4020Q MOLDED INDUCTOR RECOMMENDED REFLOW PROFILE 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL TSMAX TL TSMIN Ramp Down Preheat 1 2 25 t 25˚C to Peak Time ZONE DESCRIPTION 1 Preheat 2 Reflow 3 Peak Heat TEMPERATURE Tsmin ~ Tsmax 150°C ~ 180°C TL 230°C TP 250°C+0/-5°C TIMES 60 ~ 120 sec. 30 ~ 40 sec. 10 sec. MAX Revised 10/09/20 AMDLA4020Q MOLDED INDUCTOR PACKAGING Tape and Reel: 3,000 pcs TYPE A B C D 13” x 12 mm 12.4 +2/-0 100.0 ± 0.5 13.0 +0.5/-0.2 330.0 B0 4.85 ± 0.1 A0 4.45 ± 0.1 K0 2.3 ± 0.1 P W F T D 8.0 ± 0.1 12.0 ± 0.3 5.5 ± 0.1 0.3 ± 0.05 1.5 Dimensions: mm This product is commercial off-the-shelf (COTS) and not specifically designed for automotive, military, aviation, aerospace, implantable, life-dependent medical or safety applications. This product is not recommended for use in any application requiring high reliability in which component failure could result in loss of life and/or property damage without prior written approval from Abracon. Specifications are subject to change without notice. Contact Abracon for more information. Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 Revised 10/09/20