AMDLA4020S-1R0MT

AMDLA4020S MOLDED INDUCTOR LLC FEATURES • ELECTRICAL SPECIFICATIONS @ 25°C PART NUMBER* INDUCTANCE (uH) TOLERANCE (%) IRMS (A) ISAT (A) 0.12 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 15.0 22.0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 15 14 11 10 9.0 6.5 4.8 4.5 3.5 3.0 2.4 2.0 1.8 1.2 30 24 14 14 12 9.0 7.5 6.0 5.0 4.5 3.5 3.5 2.6 2.1 AMDLA4020S-R12MT AMDLA4020S-R22MT AMDLA4020S-R33MT AMDLA4020S-R47MT AMDLA4020S-R68MT AMDLA4020S-1R0MT AMDLA4020S-1R5MT AMDLA4020S-2R2MT AMDLA4020S-3R3MT AMDLA4020S-4R7MT AMDLA4020S-6R8MT AMDLA4020S-100MT AMDLA4020S-150MT AMDLA4020S-220MT Pb Shielded construction Soft saturation Low DCR per cubic mm Designed for switching frequencies between 100KHz-5MHz Automotive option available upon request DC RESISTANCE (mΩ) TYP MAX 3.5 6.2 7.0 9.4 13.3 16.4 22 31.5 45 58 86 170 240 265 4.2 7.4 8.4 11.3 16 20 26 38 54 70 103 190 275 320 ROHS COMPLIANT ISO 9001:2015 CERTIFIED GENERAL SPECIFICATIONS TYPE Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame * Please refer to Part Identification section Test Conditions Inductance: 1 MHz, 1 V, 0 Adc Humidity Range: 65% RH Temperature Rise Current: Current measured at Δ T of 40°C Saturation Current: Current measured at Δ L of 30% Operating Temperature: -55°C to +125°C with (40°C rise) Irms current. Maximum Part Temperature: +125°C Components Storage Temperature: -55°C to +125°C Tape and Reel Packaging Temperature: -20°C to +65°C MSL: Level 1 MATERIALS Core: Wire: Terminal: Ink: Metal Alloy Copper Tin Plating Black PRODUCT DIMENSIONS 0.76 ± 0.3 4.4 ± 0.2 4.0 ± 0.2 PART BUILDER 1R0 M T Series Inductance* Tol. 1 Packaging 2 1. Tolerance: M = 20% 2. Packaging: B = Bulk T = Tape and Reel (3,000pcs/reel) *Refer to Electrical Specification table Top View Bottom View 1.8 ± 0.2 AMDLA4020S Front View Side View RECOMMENDED LANDING PATTERN 2.3 4.95 2.16 LLC Dimensions: mm Revised 09/16/19 2.0 ± 0.3 • • • • Check Inventory Request Samples AMDLA4020S MOLDED INDUCTOR LLC RECOMMENDED REFLOW PROFILE 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL TSMAX TL TSMIN Ramp Down Preheat 1 2 25 t 25˚C to Peak Time ZONE DESCRIPTION 1 Preheat 2 Reflow 3 Peak Heat LLC TEMPERATURE Tsmin ~ Tsmax 150°C ~ 180°C TL 230°C TP 250°C+0/-5°C TIMES 60 ~ 120 sec. 30 ~ 40 sec. 10 sec. MAX Revised 09/16/19 AMDLA4020S MOLDED INDUCTOR LLC PACKAGING Tape and Reel: 3,000 Units per Carton: 24,000 T&R per Carton: 8 Weight per Carton: 14.5 kg Weight per Unit: 0.43 g Carton Dimensions: 360 x 360 x 400 mm TYPE A B C D 13” x 12 mm 12.4 +2/-0 100.0 ± 0.5 13.0 +0.5/-0.2 330.0 B0 4.85 ± 0.1 A0 4.45 ± 0.1 K0 2.3 ± 0.1 P W F T D 8.0 ± 0.1 12.0 ± 0.3 5.5 ± 0.1 0.3 ± 0.05 1.5 Dimensions: mm This product is commercial off-the-shelf (COTS) and not specifically designed for automotive, military, aviation, aerospace, implantable, life-dependent medical or safety applications. This product is not recommended for use in any application requiring high reliability in which component failure could result in loss of life and/or property damage without prior written approval from Abracon. Specifications are subject to change without notice. Contact Abracon for more information. LLC Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 Revised 09/16/19