AMDLA4530S-3R3MT

AMDLA4530S MOLDED INDUCTOR ™ LLC FEATURES • • • • ELECTRICAL SPECIFICATIONS @ 25°C INDUCTANCE (uH) TOLERANCE (%) IRMS (A) ISAT (A) 0.10 0.12 0.22 0.35 0.47 0.68 1.0 1.2 1.5 2.2 3.3 4.7 30 30 20 20 20 20 20 20 20 20 20 20 32 30 18 16.5 16 12 8.5 7.2 6.6 6.0 5.5 5.0 32 30 17 15 11 9.0 8.5 7.6 6.3 5.7 5.0 4.0 DC RESISTANCE (mΩ) TYP MAX 1.8 2.0 2.8 4.6 5.5 7.0 12.8 14 16 23 30 43 2.1 2.3 3.2 5.1 6.4 8.4 13.8 16 21 27.6 36 52 ROHS COMPLIANT ISO 9001:2015 CERTIFIED GENERAL SPECIFICATIONS TYPE Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Operating Temperature: -55°C to +155°C with (40°C rise) Irms current. Maximum Part Temperature: +155°C Components Storage Temperature: -55°C to +125°C Tape and Reel Packaging Temperature: -55°C to +80°C MSL: Level 1 MATERIALS Core: Wire: Terminal: Ink: * Please refer to Part Identification section Test Conditions Inductance: 100 kHz, 1 V, 0 Adc Humidity Range: 85 ± 2% RH Temperature Rise Current: Current measured at Δ T of 40°C Saturation Current: Current measured at Δ L of 30% Metal Alloy Copper Tin Plating Black PRODUCT DIMENSIONS PART BUILDER 4.9 ± 0.30 M T Series Inductance* Tol. 1 Packaging 2 1. Tolerance: M = 20% N = 30% 2. Packaging: B = Bulk T = Tape and Reel (1,000pcs/reel) 1.5 ± 0.2 1R0 Top View Bottom View 2.8 ± 0.2 AMDLA4530S 1.0 ± 0.3 4.7 ± 0.2 AMDLA4530S-R10NT AMDLA4530S-R12NT AMDLA4530S-R22MT AMDLA4530S-R35MT AMDLA4530S-R47MT AMDLA4530S-R68MT AMDLA4530S-1R0MT AMDLA4530S-1R2MT AMDLA4530S-1R5MT AMDLA4530S-2R2MT AMDLA4530S-3R3MT AMDLA4530S-4R7MT Pb Shielded construction Soft saturation Low DCR per cubic mm Designed for switching frequencies between 100KHz-2MHz Automotive option available upon request • PART NUMBER* Check Inventory Request Samples *Refer to Electrical Specification table Front View Side View RECOMMENDED LANDING PATTERN 1.8 5.5 2.5 Dimensions: mm ™ LLC Revised 05/01/20 AMDLA4530S MOLDED INDUCTOR ™ LLC RECOMMENDED REFLOW PROFILE 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL TSMAX TL TSMIN Ramp Down Preheat 1 2 25 t 25˚C to Peak Time ZONE DESCRIPTION 1 Preheat 2 Reflow 3 Peak Heat TEMPERATURE Tsmin ~ Tsmax 150°C ~ 200°C TL 217°C TP 260°C TIMES 60 ~ 180 sec. 60 ~ 150 sec. 10 sec. MAX ™ LLC Revised 05/01/20 AMDLA4530S MOLDED INDUCTOR ™ LLC PACKAGING Tape and Reel: 1,000 Units per Carton: 8,000 T&R per Carton: 8 Weight per Carton: 7.9 kg Weight per Unit: 0.34 g Carton Dimensions: 410 x 325 x 415 mm TYPE A B C D 13” x 16 mm 16.4 +2/-0 100.0 ± 2.0 13.0 +0.5/-0.2 330.0 B0 5.3 ± 0.1 A0 5.0 ± 0.1 K0 3.3 ± 0.1 P W F T D 12.0 ± 0.1 16.0 ± 0.3 5.5 ± 0.1 0.35 ± 0.05 1.5 ± 0.1 Dimensions: mm This product is commercial off-the-shelf (COTS) and not specifically designed for automotive, military, aviation, aerospace, implantable, life-dependent medical or safety applications. This product is not recommended for use in any application requiring high reliability in which component failure could result in loss of life and/or property damage without prior written approval from Abracon. Specifications are subject to change without notice. Contact Abracon for more information. ™ LLC Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 Revised 05/01/20