AMDLA7030Q-R22MT

AMDLA7030Q AUTOMOTIVE MOLDED INDUCTOR TOLERANCE (%) IRMS (A) ISAT (A) 0.15 0.22 0.33 0.36 0.47 0.56 0.68 0.82 1 1.2 1.5 2.2 2.7 3.3 4.7 5.6 6.8 8.2 10 15 22 33 30 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25.0 21.0 20.0 18.0 16.0 15.0 14.5 13.0 11.0 9.5 9.0 7.5 7.0 6.0 5.0 5.0 4.2 4.0 3.5 2.5 2.0 1.8 36.0 32.0 22.0 21.0 18.0 16.0 15.0 14.0 13.5 12.5 12.0 9.0 8.8 8.5 5.5 5.2 5.0 4.7 4.5 4.0 2.5 2.0 DC RESISTANCE (mΩ) TYP MAX 1.7 2.0 2.8 3.3 3.4 3.9 4.7 5.4 5.7 7.7 10.2 13.5 17.3 19.0 28.0 39.0 43.0 54.0 62.0 110 150 215 2.1 2.5 3.4 3.9 4.0 4.5 5.3 6.0 7.4 9.5 12.1 15.0 20.0 22.0 33.0 42.0 50.0 60.0 68.0 140 190 258 * Please refer to Part Identification section Test Conditions Inductance: 100 kHz, 1 V, 0 Adc Humidity Range: 85 ± 2% RH Temperature Rise Current: Current measured at ∆ T of 40°C Saturation Current: Current measured at ∆ L of 30% AEC-Q200 QUALIFIED ISO 9001:2015 CERTIFIED Pb ROHS COMPLIANT GENERAL SPECIFICATIONS Operating Temperature: -55°C to +155°C with (40°C rise) Irms current. Maximum Part Temperature: +155°C Components Storage Temperature: -55°C to +155°C Tape and Reel Packaging Temperature: -55°C to +80°C MSL: Level 1 MATERIALS Core: Wire: Terminal: Ink: Metal Alloy Copper Tin Plating Black PRODUCT DIMENSIONS 1.6 ± 0.3 6.6 ± 0.2 7.1 ± 0.3 Top View Bottom View 2.8 ± 0.2 PART BUILDER AMDLA7030Q 1R0 M Series Inductance* Tol. T 1 Packaging Side View RECOMMENDED LANDING PATTERN 2 8.0 2. Packaging: B = Bulk T = Tape and Reel (1,000pcs/reel) 3.4 1. Tolerance: M = 20% N = 30% Front View *Refer to Electrical Specification table 3.7 Dimensions: mm ™ LLC Revised 05/01/20 3.0 ± 0.2 INDUCTANCE (uH) AMDLA7030Q-R15NT AMDLA7030Q-R22MT AMDLA7030Q-R33MT AMDLA7030Q-R36MT AMDLA7030Q-R47MT AMDLA7030Q-R56MT AMDLA7030Q-R68MT AMDLA7030Q-R82MT AMDLA7030Q-1R0MT AMDLA7030Q-1R2MT AMDLA7030Q-1R5MT AMDLA7030Q-2R2MT AMDLA7030Q-2R7MT AMDLA7030Q-3R3MT AMDLA7030Q-4R7MT AMDLA7030Q-5R6MT AMDLA7030Q-6R8MT AMDLA7030Q-8R2MT AMDLA7030Q-100MT AMDLA7030Q-150MT AMDLA7030Q-220MT AMDLA7030Q-330MT Check Inventory AEC-Q200 Qualified Shielded construction Soft saturation High opertating temperature up to 155°C Designed for switching frequencies between 100KHz-2MHz ELECTRICAL SPECIFICATIONS @ 25°C PART NUMBER* LLC Request Samples FEATURES • • • • • ™ AMDLA7030Q AUTOMOTIVE MOLDED INDUCTOR ™ LLC RECOMMENDED REFLOW PROFILE 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL TSMAX TL TSMIN Ramp Down Preheat 1 2 25 t 25˚C to Peak Time ZONE DESCRIPTION 1 Preheat 2 Reflow 3 Peak Heat TEMPERATURE Tsmin ~ Tsmax 150°C ~ 200°C TL 217°C TP 260°C TIMES 60 ~ 180 sec. 60 ~ 150 sec. 10 sec. MAX ™ LLC Revised 05/01/20 AMDLA7030Q AUTOMOTIVE MOLDED INDUCTOR ™ LLC PACKAGING Tape and Reel: Units per Carton: T&R per Carton: 1,000 8,000 8 TYPE A B C D 13” x 16 mm 16.4 +2/-0 100 ± 2.0 13.5 ± 0.5 330 B0 7.7 ± 0.1 A0 7.0 ± 0.1 K0 3.3 ± 0.1 P W F T D 12.0 ± 0.1 16.0 ± 0.3 7.5 ± 0.1 0.35 ± 0.05 1.5 ± 0.1 Dimensions: mm This product is commercial off-the-shelf (COTS) and not specifically designed for automotive, military, aviation, aerospace, implantable, life-dependent medical or safety applications. This product is not recommended for use in any application requiring high reliability in which component failure could result in loss of life and/or property damage without prior written approval from Abracon. Specifications are subject to change without notice. Contact Abracon for more information. ™ LLC Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 Revised 05/01/20