AMPLA4020S-2R2MT

AMPLA4020S MOLDED INDUCTOR LLC FEATURES • • • • ELECTRICAL SPECIFICATIONS @ 25°C INDUCTANCE (uH) TOLERANCE (%) IRMS (A) ISAT (A) 0.10 0.18 0.22 0.33 0.36 0.47 0.56 0.68 1.0 1.2 1.5 2.2 3.3 4.7 5.6 6.8 8.2 10.0 15.0 22.0 30 30 30 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 12.0 13.5 13.0 10.0 9.0 8.0 7.3 7.0 5.0 4.8 4.5 4.0 3.5 2.6 2.2 2.1 2.0 1.8 1.5 1.2 35 28 24 18 15 12 10 10 8.5 7.8 7.0 6.0 4.0 3.5 3.0 2.8 2.5 2.3 1.9 1.4 DC RESISTANCE (mΩ) TYP MAX 3.2 4.6 6.6 7.8 8.7 11.2 13.5 16 22 25 34.8 51 69 95 112 150 158 215 325 470 4 5.4 7.3 8.6 12 14 16 19 27 30 42 61 76 105 125 172 180 243 374 500 ROHS COMPLIANT ISO 9001:2015 CERTIFIED GENERAL SPECIFICATIONS TYPE Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame * Please refer to Part Identification section Operating Temperature: -55°C to +125°C with (40°C rise) Irms current. Maximum Part Temperature: +125°C Components Storage Temperature: -55°C to +125°C Tape and Reel Packaging Temperature: -55°C to +80°C MSL: Level 1 MATERIALS Core: Wire: Terminal: Ink: Paint: Carbonyl Powder Copper Tin Plating Black Gray PRODUCT DIMENSIONS Test Conditions Inductance: 100 kHz, 1 V, 0 Adc Humidity Range: 85 ± 2% RH Temperature Rise Current: Current measured at ∆ T of 40°C Saturation Current: Current measured at ∆ L of 30% 0.76 ± 0.3 4.06 ± 0.25 4.45 ± 0.25 2.0 ± 0.20 AMPLA4020S-R10NT AMPLA4020S-R18NT AMPLA4020S-R22NT AMPLA4020S-R33MT AMPLA4020S-R36MT AMPLA4020S-R47MT AMPLA4020S-R56MT AMPLA4020S-R68MT AMPLA4020S-1R0MT AMPLA4020S-1R2MT AMPLA4020S-1R5MT AMPLA4020S-2R2MT AMPLA4020S-3R3MT AMPLA4020S-4R7MT AMPLA4020S-5R6MT AMPLA4020S-6R8MT AMPLA4020S-8R2MT AMPLA4020S-100MT AMPLA4020S-150MT AMPLA4020S-220MT Pb Shielded construction Soft saturation High current density Designed for switching frequencies between 100KHz-2MHz Automotive option available upon request • PART NUMBER* Check Inventory Request Samples Top View Bottom View AMPLA4020S 1R0 M T Series Inductance* Tol. 1 Packaging 2 Front View Side View RECOMMENDED LANDING PATTERN 5.2 2. Packaging: B = Bulk T = Tape and Reel (3,000pcs/reel) 2.4 1. Tolerance: M = 20% N = 30% 1.8 ± 0.2 PART BUILDER *Refer to Electrical Specification table 2.2 Dimensions: mm LLC Revised 09/23/19 AMPLA4020S MOLDED INDUCTOR LLC RECOMMENDED REFLOW PROFILE 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL TSMAX TL TSMIN Ramp Down Preheat 1 2 25 t 25˚C to Peak Time ZONE DESCRIPTION 1 Preheat 2 Reflow 3 Peak Heat LLC TEMPERATURE Tsmin ~ Tsmax 150°C ~ 200°C TL 217°C TP 260°C TIMES 60 ~ 180 sec. 60 ~ 150 sec. 10 sec. MAX Revised 09/23/19 AMPLA4020S MOLDED INDUCTOR LLC PACKAGING Tape and Reel: 3,000 Units per Carton: 24,000 T&R per Carton: 8 Weight per Carton: 9.72 kg Weight per Unit: 0.175 g Carton Dimensions: 410 x 325 x 415 mm TYPE A B C D 13” x 12 mm 12.4 +2/-0 100.0 ± 2.0 13.0 +0.5/-0.2 330.0 B0 5.0 ± 0.1 A0 4.4 ± 0.1 K0 2.3 ± 0.1 P W F T D 8.0 ± 0.1 12.0 ± 0.3 5.5 ± 0.1 0.35 ± 0.05 1.5 Dimensions: mm This product is commercial off-the-shelf (COTS) and not specifically designed for automotive, military, aviation, aerospace, implantable, life-dependent medical or safety applications. This product is not recommended for use in any application requiring high reliability in which component failure could result in loss of life and/or property damage without prior written approval from Abracon. Specifications are subject to change without notice. Contact Abracon for more information. LLC Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 Revised 09/23/19