AMPLA7030S-R22NT

AMPLA7030S MOLDED INDUCTOR ™ LLC FEATURES IRMS (A) ISAT (A) 0.10 0.13 0.15 0.16 0.18 0.19 0.20 0.22 0.25 0.33 0.36 0.40 0.47 0.56 0.60 0.68 0.75 0.82 0.90 1.0 1.2 1.5 1.8 2.0 2.2 2.5 2.7 3.3 4.7 5.6 6.8 8.2 10 12 15 18 22 33 47 30 30 30 30 30 30 30 30 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 32.5 27.6 27 27 25 24 24 23 21 20 19 18 17.5 16.5 16 15.5 14.5 13 11 11 10 9.0 8.5 8.2 8.0 7.0 7.0 6.0 5.5 5.0 4.5 4.0 3.5 3.3 3.0 2.5 2.0 2.0 1.75 60 50 45 45 43 41 41 40 39 32 32 27.5 26 25.5 25.5 25 24.5 24 22 22 20 18 16 15 14 13 13 13.5 10 9.0 8.0 7.5 6.0 5.5 4.0 4.0 3.5 2.5 2.0 DC RESISTANCE (mΩ) TYP MAX 1.2 1.3 1.5 1.5 1.7 1.8 1.8 2.1 3.3 3.5 3.6 3.7 4.0 4.7 4.7 4.8 5.5 6.7 8.3 8.3 10 13 14 16 18 20 24 28 37 43 54 64 75 81 107 140 165 200 302 1.7 1.8 1.9 1.9 2.3 2.5 2.5 2.8 3.5 3.9 4.2 4.1 4.2 5.0 5.2 5.5 6.6 8 10 10 12 15 17 19 20 22 27 30 40 48 60 68 85 93 123 160 190 240 363 TYPE Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Operating Temperature: -55°C to +125°C with (40°C rise) Irms current. Maximum Part Temperature: +125°C Components Storage Temperature: -55°C to +125°C Tape and Reel Packaging Temperature: -55°C to +80°C MSL: Level 1 Not recommended for D.I. water wash MATERIALS Core: Wire: Terminal: Ink: Paint: Carbonyl Powder Copper Tin Plating Black Gray PRODUCT DIMENSIONS 1.8 ± 0.3 7.3 ± 0.3 Top View Bottom View Front View Side View RECOMMENDED LANDING PATTERN 8.4 Test Conditions Inductance: 100 kHz, 1 V, 0 Adc Humidity Range: 85 ± 2% RH Temperature Rise Current: Current measured at ∆ T of 40°C Saturation Current: Current measured at ∆ L of 30% 3.5 * Please refer to Part Identification section 2.5 Dimensions: mm ™ LLC Revised 12/16/19 3.0 ± 0.3 AMPLA7030S-R10NT AMPLA7030S-R13NT AMPLA7030S-R15NT AMPLA7030S-R16NT AMPLA7030S-R18NT AMPLA7030S-R19NT AMPLA7030S-R20NT AMPLA7030S-R22NT AMPLA7030S-R25MT AMPLA7030S-R33MT AMPLA7030S-R36MT AMPLA7030S-R40MT AMPLA7030S-R47MT AMPLA7030S-R56MT AMPLA7030S-R60MT AMPLA7030S-R68MT AMPLA7030S-R75MT AMPLA7030S-R82MT AMPLA7030S-R90MT AMPLA7030S-1R0MT AMPLA7030S-1R2MT AMPLA7030S-1R5MT AMPLA7030S-1R8MT AMPLA7030S-2R0MT AMPLA7030S-2R2MT AMPLA7030S-2R5MT AMPLA7030S-2R7MT AMPLA7030S-3R3MT AMPLA7030S-4R7MT AMPLA7030S-5R6MT AMPLA7030S-6R8MT AMPLA7030S-8R2MT AMPLA7030S-100MT AMPLA7030S-120MT AMPLA7030S-150MT AMPLA7030S-180MT AMPLA7030S-220MT AMPLA7030S-330MT AMPLA7030S-470MT TOLERANCE (%) ISO 9001:2015 CERTIFIED GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS @ 25°C INDUCTANCE (uH) ROHS COMPLIANT 2.8 ± 0.2 • PART NUMBER* Pb Shielded construction Soft saturation High current density Designed for switching frequencies between 100KHz-2MHz Automotive option available upon request 6.6 ± 0.3 • • • • Check Inventory Request Samples AMPLA7030S MOLDED INDUCTOR ™ LLC PART BUILDER AMPLA7030S 1R0 M Series Inductance* Tol. 1. Tolerance: M = 20% N = 30% T 1 Packaging 2 2. Packaging: B = Bulk T = Tape and Reel (1,000pcs/reel) *Refer to Electrical Specification table RECOMMENDED REFLOW PROFILE 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL TSMAX TL TSMIN Ramp Down Preheat 1 2 25 t 25˚C to Peak Time ZONE DESCRIPTION 1 Preheat 2 Reflow 3 Peak Heat TEMPERATURE Tsmin ~ Tsmax 150°C ~ 200°C TL 217°C TP 260°C TIMES 60 ~ 180 sec. 60 ~ 150 sec. 10 sec. MAX ™ LLC Revised 12/16/19 AMPLA7030S MOLDED INDUCTOR ™ LLC PACKAGING Tape and Reel: 1,000 Units per Carton: 8,000 T&R per Carton: 8 Weight per Carton: 11.1 kg Weight per Unit: 0.75 g Carton Dimensions: 410 x 325 x 415 mm TYPE A B C D 13” x 16 mm 16.4 +2/-0 100 ± 2.0 13.0 +0.5/-0.2 330 B0 7.7 ± 0.1 A0 7.0 ± 0.1 K0 3.3 ± 0.1 P W F T D 12.0 ± 0.1 16.0 ± 0.3 7.5 ± 0.1 0.35 ± 0.05 1.5 ± 0.1 Dimensions: mm This product is commercial off-the-shelf (COTS) and not specifically designed for automotive, military, aviation, aerospace, implantable, life-dependent medical or safety applications. This product is not recommended for use in any application requiring high reliability in which component failure could result in loss of life and/or property damage without prior written approval from Abracon. Specifications are subject to change without notice. Contact Abracon for more information. ™ LLC Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 Revised 12/16/19