AOCJY3-10.000MHZ

OVEN CONTROLLED CRYSTAL OSCILLATOR Pb FEATURES: RoHS | | | | | | | | | | | | | | Compliant | APPLICATIONS: STANDARD SPECIFICATIONS: m pi l m Overall Frequency Range (Note #1) n H a om o Hi (Note #2) o o (Note #2) % a o Sin a Po a Stabilit ºC a n Stabilit tion (Note #3) C to ppb C to Sp ppb C to S n on ppb S pp ppb % ppb a ppb Co mption Co mption < min n Note #1: Carrier frequency 100.000MHz is not offered @ Vdd=12.0V Note #2: When Vdd=12.0V; Level “1” = 4.50 V minimum; Level “0” = 0.50V maximum Note #3: ±5.00 ppb stability is only available for F0 ≤ 40MHz. For frequencies above 40MHz, the best available frequency stability is ±10.00 ppb over -20°C to +70°C LLC 1501 Hidden Creek Lane Spicewood TX 78751 Phone: 949-546-8000 | Fax: 949-546-8001 For terms and conditions of sales visit: www.abracon.com REVISED: 07/05/2018 ABRACON IS ISO9001-2015 CERTIFIED OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY3 Series RoHS Pb 25.4x 25.4 x 13.0 mm Compliant | | | | | | | | | | | | | | STANDARD SPECIFICATIONS - continued. Parameters Minimum Typical Maximum Units Daily ±1.0 ppb First Year ±100 ppb 10-Years ±500 ppb -35 dBc Notes Aging Spectral Content Spurious Response Phase Noise (10MHz Carrier) @ 5V @ 1 Hz offset -90 dBc @ 10 Hz offset -120 dBc @ 100 Hz offset -140 dBc @ 1,000 Hz offset -145 dBc @ 10,000 Hz offset -155 dBc Vdd Volts Electrical Frequency Adjustment Control Voltage Range (Vc) 0.0 Frequency Pull Range ±0.700 Frequency Pull Slope ppm Positive Control Voltage Port Impedance 10 Center Control Voltage (Note #4) (Vdd/2) -0.5 Control Port Linearity k Vdd/2 (Vdd/2) +0.5 Volts ±10 Center Control Voltage % Reference Voltage (Vdd=3.3V) 2.70 2.80 2.90 Volts Output @ Pin#4 Reference Voltage (Vdd=5.0V) 4.40 4.50 4.60 Volts Output @ Pin#4 Reference Voltage (Vdd=12.0V) Storage Temperature 4.90 5.00 5.10 Volts Output @ Pin#4 +100 ºC Note #4: -40 When Vdd=12.0V, Control Voltage Range is 0.0V to 5.0V and therefore, the Center Control Voltage is (2.50V±0.50V) OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY3 - - Supply Voltage Option Blank: 3.30V A: 5.00V B: 12.00V(*) MHz - RF Output Options Blank: CMOS SW: Sinewave (*) Frequency Range limited to 10 – 40MHz Frequency in MHz Such as; 10.000 MHz 26.000 MHz 100.000 MHz LLC Temperature Options E: -20°C to +70°C F: -40°C to +75°C 1501 Hidden Creek Lane Spicewood TX 78751 Phone: 949-546-8000 | Fax: 949-546-8001 For terms and conditions of sales visit: www.abracon.com REVISED: 07/05/2018 ABRACON IS ISO9001-2015 CERTIFIED OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY3 Series Pb RoHS Compliant 25.4x 25.4 x 13.0 mm | | | | | | | | | | | | | | | OUTLINE DIMENSIONS REFLOW PROFILE: PACKAGING: 15 pcs/tray TS max to TL (Ramp-up Rate) 3°C/second max. Preheat Temperature Min. (TS Min.) 150°C Temperature Typical (T S Typ.) 175°C Temperature Max. (TS Max.) 200°C Time (tS) 60 ~ 180 seconds Ramp-up rate (TL to Tp ) 3°C/second max. Time Maintained Above: --Temperature (TL)/Time (TL) 217°C/60 ~ 150 seconds Peak Temperature (Tp) 250°C max. for 10 seconds Target Peak Temperature (Tp Target) 250°C +0/-5°C Time within 5°C of actual peak (tp) 20 ~ 40 seconds Ramp-down Rate 6°C/second max. Tune 25°C to Peak Temperature (t) 8 minutes max. ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. LLC 1501 Hidden Creek Lane Spicewood TX 78751 Phone: 949-546-8000 | Fax: 949-546-8001 For terms and conditions of sales visit: www.abracon.com REVISED: 07/05/2018 ABRACON IS ISO9001-2015 CERTIFIED