AOCTQ5-V-10.000MHZ-M10-SW

Oven Controlled Crystal Oscillators AOCTQ5 Pb ESD Sensitive FEATURES: • 36.1x 27.1 x 12.1mm Leaded- RoHS Compliant Package • SC-Cut, High “Q” resonator based design • Either CMOS or Sinewave output • Tight frequency stability: ± 3 ppb accuracy over -40°C to +85°C temperature range ± 5 ppb accuracy over -55°C to +85°C temperature range • Excellent close-in phase noise (-145 dBc/Hz max. @1kHz offset; 10MHz carrier) • Ideal for Low-g-Sensitivity Designs (0.3 ppb/g maximum) RoHS/RoHS II compliant 36.1 x 27.1 x 12.1 mm Leaded APPLICATIONS: • COTS Military & Industrial Radios & Timing Circuits • Cellular Infrastructure • Radar Systems • Test & Measurement Equipment • GPS Tracking with precision hold-over accuracy • WiMax / WLAN STANDARD SPECIFICATIONS: Parameters Min. RF Output Frequency Supply Voltage (Vdd) Typ. Units 5 MHz Vdc W 1.6 W +14 -35 -70 dBm dBc dBc Ω 10.00 5 Power Consumption Waveform Output Level Harmonics Spurious Output Load Waveform VOH VOL Duty Cycle Rise/Fall Time Output Load Storage Temperature Range Max. Sinewave +7 50 HCMOS 2 .4 0 .4 55 6 15 +125 V V % ns pF ºC Initial Frequency Tolerance ±10 ppb Short-term Stability (1 sec) 5 x 10-11 45 -55 Warm-up Time 10 Minutes G-Sensitivity 0.3 ppb/g Frequency Stability vs. Temp. During Warming-up Steady-State @ +25°C & under still air With Load =15pF @ (VOH –VOL)/2 With Load =15pF At shipment, nominal EFC Test after 15 minutes @+25°C, with-in ±5ppb of final frequency Available Options -40º C to +85ºC -55º C to +85ºC Frequency Stability vs. Supply Voltage (Vdd ± 5%) Frequency Stability vs. Load Variation (Load ± 5%) Aging Per Day Per Year ABRACON IS ISO9001:2008 CE RTIFIED CERTIFIED Notes LLC ±3 ppb Option “I3” ±5 ppb Option “I5” ±5 ppb Option “M5” ±10 ppb Option “M10” ±3 ppb ±3 ppb ±0.5 ±50 ppb ppb After 30 days in operation 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Oven Controlled Crystal Oscillators AOCTQ5 Pb ESD Sensitive RoHS/RoHS II compliant 36.1 x 27.1 x 12.1 mm Leaded STANDARD SPECIFICATIONS: Parameters Phase Noise (10MHz Carrier) @ +25°C @ 10 Hz offset @ 100 Hz offset @ 1,000 Hz offset @ 10,000 Hz offset @ 100,000 Hz offset Min. Typ. Max. -120 -140 -145 -155 -160 Units Notes dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz For Voltage Control Option only Electrical Frequency Adjustment Control Voltage Range (Vc) 0 Center Control Voltage (Vc) 2.30 Frequency Pull Range Frequency Pull Slope ±500 2.50 5 Vdc 2.70 Vdc To be with-in ±10 ppb from 10.000MHz (as received) ppb Positive Maximum Ratings Parameters Min. Supply Voltage (Vdd) Control Voltage (Vc) ESD, HBM/CDM/MM Typ. -0.3 0 Max. Units 15 5 V V Notes 3kV/1kV/200V PART IDENTIFICATION: AOCTQ5 Fixed or Voltage Controlled X = Fixed V = Voltage Controlled ABRACON IS ISO9001:2008 CE RTIFIED CERTIFIED -10.000 MHz - Operating Temp. Range -40°C to +85°C -55°C to +85°C - Frequency Stability (ppb) ±3 ±5 ±10 I3 I5 M5 M10 LLC Output Type Blank: CMOS SW: Sinewave 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Oven Controlled Crystal Oscillators AOCTQ5 Pb ESD Sensitive RoHS/RoHS II compliant 36.1 x 27.1 x 12.1 mm Leaded OUTLINE DIMENSION: Pin No. 1 2 3 4 5 * Function Voltage Controlled Control Voltage (Vc) NC Power Supply (Vdd) Output (Fout) Ground, Case (GND) For factory test only Fixed NC Dimensions: mm TAPE & REEL: Packaging: 20pcs/tray Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale