APAE1575R2540AADBE-T

1575.42MHZ; 25 x 25 x 4mm GPS Patch Antenna APAE1575R2540AADBE-T RoHS/ RoHS II compliant MSL level: Not Applicable 25.0 x 25.0 x 4.0mm | | | | | | | | | | | | | | | FEATURES: • High Gain • Compact Size and Low Profile • Pin type • Customization Available • RoHS Compliance TYPICAL APPLICATIONS: Automotive navigation, Marine buoys, Surveying equipment, Cell phone, Laptop, Healthcare and medical monitoring devices, PND, PDA STANDARD SPECIFICATIONS: Parameters Min. Receiving Frequency Range Center Frequency @ -10dB bandwidth (*) -10dB Bandwidth Typ. Max. 1575.42±1.023 MHz 1573.0±2.5 MHz 8 Gain (Zenith @ 90˚) (*) Note (with tape on 27x27mm ground plane) MHz 4.5 dBic 2.32 VSWR at Center Frequency Polarization Model Frequency Temperature Coefficient Units (Peak gain on standardized Ground Plane.) (Right Hand Circular Polarization) RHCP 20 ppm/°C Application environment, including size of ground plane will affect stated performance. Fine tuning might be required when installed on customer’s PCB. TEST CONDITIONS & TEST SETUP: RADIATION PATTERN Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65 ±20% R.H.) ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised 11.13.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 1575.42MHZ; 25 x 25 x 4mm GPS Patch Antenna APAE1575R2540AADBE-T RoHS/ RoHS II compliant 25.0 x 25.0 x 4.0mm | | | | | | | | | | | | | | | IMPEDANCE CHARACTERISTICS OUTLINE DRAWING: Dimension: mm ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised 11.13.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 1575.42MHZ; 25 x 25 x 4mm GPS Patch Antenna APAE1575R2540AADBE-T RoHS/ RoHS II compliant 25.0 x 25.0 x 4.0mm | | | | | | | | | | | | | | | PACKAGING: “T” is for a vacuum sealed tray containing 50 units. 1000 pieces is the suggested quantity containing 20-trays with 50-pcs per Tray. NOTE: This product is vacuum packaged to reduce the possibility of oxidation and/or contamination during storage. 8 3,6 5 1 7 4 B NO. 1 2 Name Inner Box Package 3 4 Vacuum Bag Certificate of approval 5 Label 6 7 Cushion Tray 8 Adhesive tape C 序号 名 称 数量 1 内 盒（七） 4 2 外箱十二 1 3 垫片（二） 20 4 合格证 1 5 标 签 5 6 7 CAUTION: Inner Box dimensions (unit: mm) A 2 8胶 带 包装座（二） 真空袋（一） 24 4 3.5 (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. NOTE: 1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information. 2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement. 3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification. 4) When changing your production process, please notify ABRACON immediately. 5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. ABRACON’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information. 6) All specifications and Marking will be subject to change without notice. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised 11.13.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com