APAE915R2540ABDB1-T

915MHz; 25 x 25 x 4mm RFID(USA) Patch Antenna APAE915R2540ABDB1-T RoHS/RoHS II Compliant MSL level: Not Applicable 25.0 x 25.0 x 4.0mm | | | | | | | | | | | | | | | FEATURES: • Compact size • RoHS Compliance TYPICAL APPLICATIONS: RFID systems for Logistic & Inventory Management of Retail, Pharmaceutical, Automotive Industries; Industrial automation, Contactless smart cards. STANDARD SPECIFICATIONS: Parameters Nominal Frequency Center Frequency @ -10dB bandwidth(*) Min. Typ. Max. 915.0 Units MHz Note 927.5±3.0 MHz (without tape on 35×35mm ground plane.) 30±15 Ω (Peak gain on standardized Ground Plane) -5± 15 Ω Real part at CF Imaginary part at CF Polarization Model Impedance Frequency Temperature Coefficient (*) (Right Hand Circular Polarization) RHCP 50 20 Ω ppm/°C Application environment, including size of ground plane will affect stated performance. Fine tuning might be required when installed on customer’s PCB. TEST CONDITIONS & TEST SETUP: RADIATION PATTERN Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) Measured at 927MHz ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.03.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale 915MHz; 25 x 25 x 4mm RFID(USA) Patch Antenna APAE915R2540ABDB1-T RoHS/RoHS II Compliant 25.0 x 25.0 x 4.0mm | | | | | | | | | | | | | | | IMPEDANCE CHARACTERISTICS OUTLINE DRAWING: adhesive tape 0.8 2.5±0.1 25.0±0.3 4-R4.0 0.6max 4.0 ± 0.1 1.9±0.3 25.0±0.3 unit:mm ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.03.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale 915MHz; 25 x 25 x 4mm RFID(USA) Patch Antenna APAE915R2540ABDB1-T RoHS/RoHS II Compliant 25.0 x 25.0 x 4.0mm | | | | | | | | | | | | | | | PACKAGING: “T” is for a vacuum sealed tray containing 50 units. 1000 pieces is the suggested quantity containing 20-trays with 50-pcs per Tray. NOTE: This product is vacuum packaged to reduce the possibility of oxidation and/or contamination during storage. 8 3,6 5 1 7 4 NO. 1 2 3 Name Inner Box Package Vacuum Bag 4 Certificate of approval 5 6 Label Cushion 7 8 Tray Adhesive tape Inner Box dimensions (unit: mm) 2 序号 CAUTION: 名 称 数量 1 内 盒（七） 4 2 3 外箱十二 1 20 垫片（二） 合格证 4 5 标签 1 5 6 7 包装座（二） 真空袋（一） 24 4 胶带 8 mechanical stress3.5 (1) Do not apply excess to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. NOTE: 1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information. 2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement. 3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification. 4) When changing your production process, please notify ABRACON immediately. 5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. ABRACON’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information. 6) All specifications and Marking will be subject to change without notice. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.03.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale