APAES868R8060C16-T

RFID Patch Antenna APAES868R8060C16-T RoHS/RoHS II compliant MSL level: Not Applicable FEATURES: • High Gain • Pin type • Customization Available • RoHS Compliance 80.0 x 80.0 x 6.0mm TYPICAL APPLICATIONS: RFID systems for Logistic & Inventory Management of Retail, Pharmaceutical, Automotive Industries; Industrial automation, Contactless smart cards. STANDARD SPECIFICATIONS: Parameters Min. Receiving Frequency Range Center Frequency(*) 854.0 Typ. 868 Max. Units Note 882.0 MHz MHz MHz ( On a 120*120mm Ground Plane ) 20 Bandwidth Gain Axial Ratio VSWR @ Center Frequency Polarization Model Impedance Frequency Temperature Coefficient 5.3 dBi 3 dB 1.3 -10 (Return loss ≤-10dB) (Peak gain on 120*120mm Ground Plane facing Zenith.) (Right Hand Circular Polarization) RHCP 50 10 Ω ppm/°C (*) Application environment, including size of the ground plane, proximity to adjacent components, etc., will affect stated performance. Fine tuning might be required when installed on end-customer’s PCB. Abracon offers Antenna Optimization Service, please contact Abracon. TEST CONDITIONS & TEST SETUP: 120 120 Patch Antenna SMA Adapter Ground Plane Calibration Point Network Analyzer S11 Characteristics : Log Map : Smith Chart STRUCTURE AND MATERIAL Description Antenna Substrate Pin Electrode Ground Plane Adhesive Type ABRACON IS ISO9001-2015 CER RCER TIFIED CE TIFIED Material Dielectric Ceramics Copper and tinplated Ag Plated Ag Plated NITTO 5000NS REVISED: 07/19/2021 Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 RFID Patch Antenna APAES868R8060C16-T SMITH CHART RoHS/RoHS II compliant 80.0 x 80.0 x 6.0mm RADIATION PATTERN OUTLINE DIMENSION: Other Tolerance: ±0.5mm ABRACON IS ISO9001-2015 CER RCER TIFIED CE TIFIED Unit: mm REVISED: 07/19/2021 Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 RFID Patch Antenna APAES868R8060C16-T RoHS/RoHS II compliant 80.0 x 80.0 x 6.0mm PACKAGING: Each foam box contains 12pcs of RFID patch antenna. There are 3 foam boxes per inner box, and 2 inner boxes per carton (Outer box). Foam Box Package Type Foam Box Inner Box Outer Box Quantity 12 pcs/foam box 36 pcs/inner box 72 pcs/outer box Outer Box CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. NOTE: 1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information. 2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement. 3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification. 4) When changing your production process, please notify ABRACON immediately. 5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. ABRACON’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information. 6) All specifications and Marking will be subject to change without notice. ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. ABRACON IS ISO9001-2015 CER RCER TIFIED CE TIFIED REVISED: 07/19/2021 Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858