APAES915R6460C16-T

RFID Patch Antenna APAES915R6460C16-T RoHS/RoHS II compliant MSL level: Not Applicable FEATURES: • High Gain • Pin type • Customization Available • RoHS Compliance 62.5 x 62.5 x 6.0mm TYPICAL APPLICATIONS: RFID systems for Logistic & Inventory Management of Retail, Pharmaceutical, Automotive Industries; Industrial automation, Contactless smart cards. STANDARD SPECIFICATIONS: Parameters Receiving Frequency Range Center Frequency (*) Min. 902.0 Typ. 915 Max. Units Note 928.0 MHz MHz MHz ( On a 65*65mm Ground Plane ) dBic (Peak gain on 70*70mm Ground Plane facing Zenith.) 15 Bandwidth Gain Axial Ratio VSWR @ Center Frequency Polarization Model Impedance Frequency Temperature Coefficient 3.5 3 dB 1.5 (Right Hand Circular Polarization) RHCP 50 -10 (Return loss ≤-10dB) 10 Ω ppm/°C (*) Application environment, including size of the ground plane, proximity to adjacent components, etc., will affect stated performance. Fine tuning might be required when installed on end-customer’s PCB. Abracon offers Antenna Optimization Service, please contact Abracon. TEST CONDITIONS & TEST SETUP: STRUCTURE AND MATERIAL Description Antenna Substrate Pin Electrode Ground Plane Adhesive Type ABRACON IS ISO9001-2015 CER RCER TIFIED CE TIFIED Material Dielectric Ceramics Copper and tinplated Ag Plated Ag Plated NITTO 5000NS REVISED: 07/19/2021 Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 RFID Patch Antenna APAES915R6460C16-T SMITH CHART RoHS/RoHS II compliant 62.5 x 62.5 x 6.0mm RADIATION PATTERN OUTLINE DIMENSION: Other Tolerance: ±0.3mm ABRACON IS ISO9001-2015 CER RCER TIFIED CE TIFIED Unit: mm REVISED: 07/19/2021 Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 RFID Patch Antenna APAES915R6460C16-T RoHS/RoHS II compliant 62.5 x 62.5 x 6.0mm PACKAGING: Package Type Tray Inner Box Outer Box Quantity 8 pcs/tray 80pcs/box 160 pcs/box 120 Inner Box 0 20 335 CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. NOTE: 1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information. 2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement. 3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification. 4) When changing your production process, please notify ABRACON immediately. 5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. ABRACON’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information. 6) All specifications and Marking will be subject to change without notice. ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. ABRACON IS ISO9001-2015 CER RCER TIFIED CE TIFIED REVISED: 07/19/2021 Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858