APAMP-111

GPS Active Antenna Module - Adhesive Mount APAMP-111 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 38.3 X 35 X 13.5mm MSL level: Not Applicable FEATURES: • High Reliability/Sensitivity • Compact Size • Easy to install (adhesive tape base) • SGS • ROHS Compliant TYPICAL APPLICATIONS: • Automotive Navigation • Automotive Monitoring • Personal Tracking STANDARD SPECIFICATIONS: Antenna Parameters Center Frequency Bandwidth VSWR at Center Frequency Polarization Model Impedance Gain Operating Temperature Storage Temperature Min. Typ. 1575.42 ± 1.023 10.0 Max. Units MHz MHz 1.5:1 RHCP 50 4.5 -40 -45 +80 +85 Ω dBic ˚C ˚C Note (Right Hand Circular Polarization) (Based on 70× 70mm ground plane) Low Noise Amplifier (LNA) Parameters Center Frequency DC Voltage Gain Output VSWR Noise Figure DC current Min. 3.0 25 5.5 Typ. 1575.42 ± 1.023 28 8.5 Max. 5.0 31 2.0 1.5 11.5 Units MHz Note dB (+25°C ± 10°C) mA (+25°C ± 10°C) (At 3.0V) V ANTENNA’S IMPEDANCE AND RETURN-LOSS CHARACTERISTICS S11: Input VSWR Test condition: 25x25mm ground CERTIFIED 5101 Hidden Creek Lane Spicewood Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sale please visit: www.abracon.com REVISED: 06.29.2021 ABRACON IS ISO9001-2015 CERTIFIED GPS Active Antenna Module - Adhesive Mount APAMP-111 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 38.3 X 35 X 13.5mm LNA REFLECTION PROFILE OUTLINE DRAWING: Top View Side View Parameters L (Cable Length) Antenna RF Cable PCB RF Connector Shielding Thickness Adhesive Tape Description 300±10cm Dielectric Ceramic RG174 FR4 SMA-J3 Tinplate 13.5mm 3M9448A Bottom View Unit:mm CERTIFIED CERTIFIED 5101 Hidden Creek Lane Spicewood Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sale please visit: www.abracon.com REVISED: 06.29.2021 ABRACON IS ISO9001-2015 CERTIFIED GPS Active Antenna Module - Adhesive Mount APAMP-111 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 38.3 X 35 X 13.5mm Environmental Specification Parameters Operating Temperature Storage Temperature RoHS/ RoHS II Compliant Material Composition IP Rating ESD Protection Mounting Type MSL Level Handling Specification -40℃ to +80℃ -40℃ to +85℃ Yes Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) IP66 ±6 kV (direct discharge) ±8 kV (air discharge) Adhesive Tape N/A No special handling conditions PRODUCT IMAGE: PACKAGING: Each 630 x 460 x 105 mm size carton includes 100 pcs antenna, each lattice contains 2 antennas. CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. ATTENTION: Abracon LLC products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLCis required. Please contact Abracon LLC for more information. CERTIFIED CERTIFIED 5101 Hidden Creek Lane Spicewood Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sale please visit: www.abracon.com REVISED: 06.29.2021 ABRACON IS ISO9001-2015 CERTIFIED