ASGTX-D-1.000GHZ-1-T

Configurable High Performance SMD TCXO/VCTCXO ASGTX ESD Sensitive Pb RoHS/RoHS II Compliant 9.0 x 7.0 x 2.24 mm OVERVIEW: ASGTX temperature compensated Crystal Oscillators are designed to accommodate a broad breadth of Precision TCXO requirements, without NRE and extended lead-times. This oscillator series is designed and manufactured by Abracon Corporation and is available to order from 1pc to high volume production quantities. • 1-5 day quick-turn availability of a TCXO/VCTCXO with LVCMOS output, Any frequency between 10MHz & 250MHz For example, if a reference oscillator requirement calls out 49.7521MHz; ±1.00 ppm TCXO/VCTCXO with LVCMOS output, ASGTX can be configured and shipped within 1-5 days and in most cases, same day if order is received before noon. Customers with low-to-mid annual volume requirements find it difficult to procure custom frequency TCXO/VCTXCO’s without costly NRE charges and/or long lead-times (> 12 weeks). • 1-5 day quick turn availability of a TCXO/VCTXCO requiring LVDS or LVPECL Differential output, Any frequency between 10MHz to 1.50GHz ASGTX is available with either LVDS or LVPECL output, from 10MHz to 1.50GHz; at any desired frequency, such as 149.875MHz, 1.00GHz, 1.5GHz, etc. with as tight as ±1.00 ppm stability over temperature. No other solution in the marketplace currently offers such capability, especially in a small form-factor of 9.0x7.0x2.24 mm. ASGTX is suitable for a wide variety of precision timing applications where TCXO/VCTXO’s are typically employed. In addition, for high frequency LO requirements, traditionally customers have relied on SAW based oscillators. Such devices are only available at a few fixed frequencies, such as 915MHz, 1.0GHz, etc. They are typically in 9x14mm or bigger packages and vary as much as ±100 ppm over temperature. Although ASGTX series will be slightly less favorable in phase noise performance compared to SAW based oscillators, it offers the following key advantages: o ±1.00 ppm stability over -30ºC to +70ºC & ±2.00 ppm stability over -40ºC to +85ºC o Any carrier frequency between 10MHz & 1.50GHz o LVCMOS Output (10MHz to 250MHz) or LVDS / LVPECL Output (10MHz to 1.50GHz) o Small form-factor of 9.0x7.0x2.24 mm o No NRE or lead-time FEATURES: • 10MHz to 1.50GHz, any Carrier Frequency in differential mode (LVDS or LVPECL) • 10MHz to 250MHz, any Carrier Frequency in LVCMOS mode • -40ºC to +85ºC operating temperature range • ±1.0ppm stability over -30ºC to +70ºC and ±2.0ppm stability over -40ºC to +85ºC • Minimum guaranteed pull ability of ± 10ppm in VCTCXO mode • Good Phase Noise, excellent Harmonics and Spurious content • Guaranteed rms jitter of 1.80ps maximum @ 1.50GHz carrier (LVDS mode) • Immediate availability, 5-day maximum lead-time for small quantities ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED APPLICATIONS: • 40G & 100G Ethernet • WiMax, • LTE, BTS • CATV, LAN, LMDS • Point-to-Point communication networks 2 Faraday, Suit#B, Irvine, California 92618 Revised: 10.16.14 tel:949-546-8000 | fax:949-546-8001 Visit www.abracon.com for Terms & Conditions of Sale Configurable High Performance SMD TCXO/VCTCXO ASGTX Pb RoHS/RoHS II Compliant 9.0 x 7.0 x 2.24 mm KEY ELECTRICAL SPECIFICATIONS: Parameters LVCMOS Frequency: Minimum 10 LVDS LVPECL Operating Temperature: Storage Te mperature: Frequency Stability: Typical Maximum 250 Units 10 1500 MHz 10 -40 -40 1500 +85 +85 °C °C Notes ≤ ±1.00 -1.50 +1.50 ppm 1 hour after reflow Initial Set Tolerance Stability over -30°C to +70°C Option “1” -1.00 +1.00 operating ppm Option “2” -2.00 +2.00 temperature* -40°C to +85°C ** Aging @ 25ºC after one year -1.00 +1.00 ppm Supply Voltage (Vdd): 3.135 3.300 3.465 V Startup Time: 3 ms Control Voltage***: 0 Vdd V In VCTCXO Mode Frequency Pull: ±10 ppm Phase jitter RMS [ tjit( ) ] ****