ASMPH-1008-R47M-T

SMD Multilayer Chip Power Inductor ASMPH-1008 Pb RoHS/RoHS II Compliant 2.5 x 2.0 x 0.9mm APPLICATIONS: FEATURES: • High DC bias current due to trench technology • Much lower profile than any other series • Monolithic structure for high reliability • Excellent solderability and heat resistance • Magnetically shielded structure to eliminate cross coupling ASMPH family is a miniature type of multilayer power inductors constructed using low loss ferite material to support high-speed switching frequencies.The compact size and high efficiency is ideal for DC/DC converter applications in space limited boards. Switching mode regulators for smart phones and cameras. Buck converters for RFIC, RFPA and Audio Codec modules. Boost converters for flash drivers. Wireless cards, DVD players and other electronic devices. ELECTRICAL SPECIFICATIONS: Operating Temperature: -55˚C to +125˚C Storage Temperature: -10˚C to +40˚C and RH 70% (Max.) Part Number ASMPH-1008Inductance Code Units MHz Temperature Rise Current (max) mA Saturation Current (Typ) mA DCR SRF Irms Isat 0.04 0.06 0.07 0.08 0.10 0.11 105 70 65 55 30 25 1800 1600 1500 1300 1200 1100 1500 1400 1200 850 450 320 Inductance Tolerance DCR SRF Min. μH % M=±20% N=±30% M, N M, N M, N M, N M, N M, N Ω ± 25% Symbol L ASMPH-1008-R47 ASMPH-1008-1R0 ASMPH-1008-1R5 ASMPH-1008-2R2 ASMPH-1008-3R3 ASMPH-1008-4R7 0.47 1.0 1.5 2.2 3.3 4.7 Unless otherwise specified, the standard atmospheric conditions for measurement/test as: a. Ambient Temperature: 20±15˚C b. Relative Humidity: 65±20% c. Air Pressure: 86 kPa to 106 kPa Inductance (L): HP4291B+HP16192A or Equivalent, tested at 1MHz, -20dBm or 50mV. Direct Current Resistance (DCR): Milliohmeter-HP4338B or Equivalent Self-Resonant Frequency (SRF): HP4291B+HP16192A or Equivalent, -20dBm or 50mV. Temperature Rise current (Irms): Electric Power, Electric current meter, Thermometer. Irms is the value of DC current as chip surface temperature rose just 40°C against chip initial surface temperature. Saturation Current (Isat): HP6632B system DC power supply, HP4291B+HP16192A+HP16200A or equivalent. Isat is the value of DC current as inductance decreased just 30% against initial value LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 10-14-19 ISO9001-2015 CERTIFIED SMD Multilayer Chip Power Inductor ASMPH-1008 RoHS/RoHS II Compliant Pb 2.5 x 2.0 x 0.9mm PART IDENTIFICATIONS: ASMPH-1008Inductance Code Please refer to the table abo Packaging Tolerance M=±20% N=±30% T: Tape and Reel (3kpcs / reel) OUTLINE DRAWING: Recommended Land Pattern L 2.5±0.2 W T 2.0 (+0.3, -0.1) 0.9±0.1 a A B C 0.5±0.3 1.0~1.4 0.6~1.0 1.8~2.2 Dimension: mm MATERIALS: Side View Top View 1 2 3 LLC 4 1 2 3 Part Name Base Material Internal Conductor Pull out Electrode 4 Terminal Electrode 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Material Ferrite Ag Ag Ag (Inner layer) Ni-Sn (Outer layer) ABRACON IS REVISED: 10-14-19 ISO9001-2015 CERTIFIED SMD Multilayer Chip Power Inductor ASMPH-1008 RoHS/RoHS II Compliant Pb 2.5 x 2.0 x 0.9mm REFLOW PROFILE: 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL Zone Description Temperature Times TSMIN ~ TSMAX Preheat 60 ~ 120 sec. 150°C ~ 200°C TL 60 ~ 90 sec. 217°C TP Peak heat 10 sec. MAX 260°C ± 5°C Solder Paste Sn/3.0Ag/0.5Cu Allowed Reflow time 2x Max. 1 TSMAX TL 2 TSMIN 3 Ramp Down Preheat 1 2 25 t 25˚C to Peak Time TAPE & REEL: Packing T: 3,000pcs / reel 4.3 ±0.2 mm A B P K max T max 2.30±0.1 2.80±0.1 4.0±0.1 1.45 0.3 8.4+1.5/ -0.0mm 2.45 ±0.2 mm 4.0 ±0.1 mm 5.0 ±0.1 mm 58 ±2.0 mm 13. 5±0 .2 mm 3.0 ±0.1 mm max ＜14.4mm 178 ±2.0 mm Dimension: mm ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 10-14-19 ISO9001-2015 CERTIFIED