ASPI-0410FS-1R0N-T

LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0410FS Pb RoHS/RoHS II Compliant APPLICATIONS: FEATURES: • • • • • 4.0 x 4.0 x 1.0mm • Mobile phones • MP3 & 4 and other portable communication equipment • Digital cameras. Small size and low profile: 1.0mm Small DCR and high rated current High reliability to mechanical stress Magnetically shielded by magnetic powder molding Suitable for RoHS reflow profile ELECTRICAL SPECIFICATIONS: Abracon P/N: Operating Temperature & Humidity Storage Temperature and Humidityin Tape and Reel Part Number ASPI-0410FSInductance Code Units Symbol ASPI-0410FS-1R0 ASPI-0410FS-2R2 ASPI-0410FS-3R3 ASPI-0410FS-4R7 ASPI-0410FS-6R8 ASPI-0410FS-100 ASPI-0410FS-150 ASPI-0410FS-220 ASPI-0410FS Series -40 C to +125 C (Including self generated heat) -40 C to +125 C Inductance Inductance Tolerance DCR max Rated DC Current max. H L 1.0 2.2 3.3 4.7 6.8 10 15 22 % M N N M M M M M M m DCR 100 150 180 210 300 380 510 870 A IDC 1.80 1.15 1.10 0.90 0.74 0.56 0.47 0.36 Test Conditions and Equipments 1. Rated DC Current: The current when the inductance becomes 30% lower than its initial value. 2. L: HP4284A LCR meter, 100KHz, 0.25Vrms 3. DCR: milli-ohm meter PART IDENTIFICATIONS: ASPI-0410FS- Inductance Code Please refer to the Electrical Spec Table - Tolerance N: ±30%* M: ±20%* Packaging T: Tape and Reel (5kpcs / reel) *N for L = 1.0 and 2.2µH *M for L = 2.2 ~ 47µH REVISED: 12.03.2019 ABRACON ABRACON IS IS CE RTIFIED LLC 5101 Hidden Creek Lane Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sale please visit: www.abracon.com ABRACON IS ISO9001-2015 CERTIFIED LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0410FS Pb RoHS/RoHS II Compliant 4.0 x 4.0 x 1.0mm OUTLINE DIMENSION: A B C max. E F 4.0±0.2 4.0±0.2 1.0 1.1±0.2 2.5±0.2 Recommended Land Pattern Circuit Schematic No Polarity H J K 3.7 4.0 1.2 Dimension: mm REFLOW PROFILE: 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL TSMAX TL TSMIN Ramp Down Preheat 1 25 2 t 25˚C to Peak Time Zone 1 Description Preheat / Soak 2 3 ABRACON ABRACON IS IS CE RTIFIED Temperature Peak heat LLC TSMAX 150°C ~ 180°C Time 90 ~ 120 sec. TL 220°C 60 sec. MAX TP 265°C 10 sec. MAX 5101 Hidden Creek Lane Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sale please visit: www.abracon.com REVISED: 12.03.2019 ABRACON IS ISO9001-2015 CERTIFIED LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0410FS Pb RoHS/RoHS II Compliant 4.0 x 4.0 x 1.0mm TAPE & REEL: T: 5,000pcs / reel PART IDENTIFICATIONS: Dimension: mm ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. REVISED: 12.03.2019 ABRACON ABRACON IS IS CE RTIFIED LLC 5101 Hidden Creek Lane Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sale please visit: www.abracon.com ABRACON IS ISO9001-2015 CERTIFIED