ASPI-0418FS-151M-T3

Low Profile Shielded SMD Chip Power Inductor ASPI-0418FS Pb 4.0 x 4.0 x 1.80mm RoHS Compliant Features Applications • Small size and low profile: 1.88mm max • Small DCR and high rated current • High reliability to mechanical strength • Magnetically shielded by magnetic powder molding • Suitable for RoHS reflow profile • Mobile phones • MP3 & other portable communication equipment • Digital cameras Electrical Specifications Operating Temperature: Storage Temperature: -40˚C to +125˚C (Including self-generated heat) -40˚C to +125˚C Part Number Inductance Inductance Tolerance Units Symbol ASPI-0418FS-R33 ASPI-0418FS-R47 ASPI-0418FS-1R0 ASPI-0418FS-1R5 ASPI-0418FS-2R2 ASPI-0418FS-3R3 ASPI-0418FS-4R7 ASPI-0418FS-6R8 ASPI-0418FS-100 ASPI-0418FS-150 ASPI-0418FS-220 ASPI-0418FS-330 ASPI-0418FS-470 ASPI-0418FS-680 ASPI-0418FS-101 ASPI-0418FS-151 ASPI-0418FS-221 ASPI-0418FS-331 μH L 0.33 0.47 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 % M, N N N N N M M M M M M M M M M M M M M DCR mΩ Max 16 20 32 37 50 66 84 118 180 252 348 552 744 972 1560 3120 3840 5880 mΩ Typ 12 17 27 31 42 55 70 98 150 210 290 460 620 810 1300 2600 3200 4900 DCR Tolerance Self-Resonant Frequency % MHz SRF 230 220 90 70 60 45 35 30 25 18 15 12 11 7.1 5.2 5.1 4.2 3.2 ±30% ±20% Saturation Current Max A Isat 6.50 6.50 4.00 3.60 3.00 2.30 2.00 1.60 1.30 1.10 0.90 0.70 0.57 0.53 0.49 0.41 0.33 0.26 Temp Rise Current Max A Irms 4.20 3.50 3.20 2.95 2.20 2.00 1.70 1.45 1.20 0.85 0.70 0.55 0.50 0.40 0.40 0.28 0.25 0.20 Test Conditions 1. Inductance is measured in HP-4285A Precision LCR Meter 2. RDC is measured in DU-5011 milli ohm meter (or equivalent) 3. Isat: Based on inductance change (ΔL/Lo: ≤ -30%) 4. Irms: Based on temperature rise (ΔT: 40°C TYP. ) 5. Test Freq: 100KHz, 1Vrms LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 05-21-20 ISO9001-2015 CERTIFIED Low Profile Shielded SMD Chip Power Inductor ASPI-0418FS 4.0 x 4.0 x 1.80mm RoHS Compliant Pb Part Number Identification ASPI-0418FSInductance Code Please refer to the Electrical Spec Table - Tolerance Packaging T3: Tape and Reel (3kpcs / reel) N: ±30%* M: ±20%* *N for L = 0.33 ~ 1.5µH *M for L = 2.2 ~ 330µH Mechanical Information A B C Max D E F a typ. b typ. c typ. 4.0±0.2 4.0±0.2 1.8 3.3±0.2 0.95±0.2 2.1±0.2 1.9 1.1 3.7 No Polarity Dimensions: mm LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 05-21-20 ISO9001-2015 CERTIFIED Low Profile Shielded SMD Chip Power Inductor ASPI-0418FS Pb 4.0 x 4.0 x 1.80mm RoHS Compliant Materials # Part Name Material 1 Ferrite Core Ni-Zn Ferrite 2 Wire Polyurethane system enameled copper wire 3 Magnetic Glue Epoxy resin and magnetic powder Electrodes Ag/Ni/Sn or FeNiCu + Sn Alloy Marking Nitrocellulose 4 5 LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 05-21-20 ISO9001-2015 CERTIFIED Low Profile Shielded SMD Chip Power Inductor ASPI-0418FS Pb 4.0 x 4.0 x 1.80mm RoHS Compliant Reflow Profile 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL TSMAX TL TSMIN Ramp Down Preheat 1 2 25 Time Zone Description Temperature Time 1 Preheat / Soak TSMIN ~ TSMAX 150°C ~ 200°C 60 ~ 120 sec. 2 Reflow TL 217°C 60 ~ 90 sec. 3 Peak heat TP 260°C 10 sec. MAX LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 05-21-20 ISO9001-2015 CERTIFIED Low Profile Shielded SMD Chip Power Inductor ASPI-0418FS 4.0 x 4.0 x 1.80mm RoHS Compliant Pb Packaging T3= Tape and Reel (3,000pcs/reel) A0 4.3±0.1 B0 4.3±0.1 W E F 12.0±0.3 1.75±0.1 5.5±0.1 P0 4.0±0.1 P1 8.0±0.1 P2 2.0±0.05 D0 1.5+0.1/-0.0 T 0.35±0.03 Dimensions: mm ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 05-21-20 ISO9001-2015 CERTIFIED