ASPI-0504-220K-T

SMD Power Inductor ASPI-0504 RoHS/RoHS II Compliant 5.8 x 5.2 x 4.5mm APPLICATIONS: FEATURES: • OA equipments • PC and notebook • LCD TV set • Power supply • Suitable for RoHS reflow profile • High current rating and low DCR • Special lead wire design to prevent open circuit failure • Excellent terminal strength to mechanical stress ELECTRICAL SPECIFICATIONS: Abracon P/N: Operating Temperature: Storage Temperature: PART NUMBER ASPI-0504Inductance Code ASPI-0504-4R7 ASPI-0504-100 ASPI-0504-120 ASPI-0504-150 ASPI-0504-180 ASPI-0504-220 ASPI-0504-270 ASPI-0504-330 ASPI-0504-390 ASPI-0504-470 ASPI-0504-560 ASPI-0504-680 ASPI-0504-820 ASPI-0504-101 ASPI-0504-121 ASPI-0504-151 ASPI-0504-181 ASPI-0504-221 ASPI-0504-102 ASPI-0504 Series -40˚C to +85˚C +5˚C to +40˚C (In Tape and Reel) Inductance (uH) Test Frequency Tolerance DCR (Ω) max IDC (A) max 4.7 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 1000 7.96MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 1KHz 1KHz 1KHz 1KHz 1KHz 1KHz K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K K K K K K K K M 0.04 0.10 0.12 0.14 0.15 0.18 0.20 0.23 0.32 0.37 0.42 0.46 0.60 0.70 0.93 1.10 1.38 1.57 14.4 3.50 1.44 1.40 1.30 1.23 1.11 0.97 0.88 0.80 0.72 0.68 0.61 0.58 0.52 0.48 0.40 0.38 0.35 0.15 Test Conditions Inductance: 100kHz Isat: ∆L/L (initial) ≥ -10% or ΔT=40°C (Ta=20°C), whichever is lower. OPTIONS AND PART IDENTIFICATION ASPI-0504- Inductance Code Please refer to the table above ABRACON IS ISO9001:2008 CE RTIFIED - Tolerance % K: ± 10% M: ± 20% Packaging T: Tape and Reel (1.5kpcs / reel) Visit www.abracon.com for Terms & Conditions of Sale Revised: 06.24.13 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com SMD Power Inductor ASPI-0504 Pb RoHS Compliant 5.8 x 5.2 x 4.5mm OUTLINE DRAWING: A 5.8±0.3 B 5.2±0.3 C 4.5±0.35 D 5.8±0.3 E 1.80 F 1.90 G 5.00 Recommended Land Pattern Dimension: mm REFLOW PROFILE: Temperature(° C) Item Tpeak t3 Heating time t1 Heating temperature 25° C Tsoak Time 25° C to peak ABRACON IS ISO9001:2008 CE RTIFIED mark Temperature rise gradient t3 3℃/sec (max) Tsoak 50s ～ 150s 120℃～180℃ Time over 217℃ t1 70 sec Time within 5℃ of actual peak temperature t3 10～30 sec Peak temperature Tpeak 250 ( +0 / -5 ℃ ) Time 25℃ to peak Temperature 6 minutes max. Time (sec) t1 Visit www.abracon.com for Terms & Conditions of Sale Revised: 06.24.13 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com SMD Power Inductor ASPI-0504 Pb RoHS 5.8 x 5.2 x 4.5mm Compliant TAPE & REEL: T: 1,500pcs / reel A0 B0 K0 F E W P Po P2 t 5.4 ± 0.1 6.0 ± 0.1 4.8 ± 0.1 5.5 ± 0.1 1.75 ± 0.1 12 ± 0.3 8 ± 0.1 4 ± 0.1 2 ± 0.1 0.4± 0.05 A B C D 12.5 ± 0.2 100 ± 0.5 13.2 ± 0.3 330 ± 1.0 Dimension: mm ATTENTION:Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 06.24.13 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com