ASPI-2010HC-R47M-T

Wire Wound Magnetically Shielded SMD Power Inductor (High Current) ASPI-2010HC Pb FEATURES: RoHS/RoHS II Compliant 2.0 x 1.6 x 1.0 mm APPLICATIONS: • Iron based core provides large saturation current • Low DCR lowers power loss • Magnetic-resin shielding reduces leakage flux and Electro Magnetic Interference (EMI) • Metal core designed for excellent shock resistance • Low profile package takes up little PCB space • Smart Phone, Tablet, Notebook, Desktop, Server • Blu-Ray Disc Recorder, Set Top Box • Portable Gaming Device, Navigation Device ELECTRICAL SPECIFICATIONS: ASPI-2010HC -40˚C ~ +125˚C (including self heating) -10˚C ~ +40˚C and 70% R.H. max. (In tape and reel) Abracon P/N: Operating Temperature & Humidity: Storage Temperature & Humidity: Part Number ASPI-2010HCInductance Code Inductance Inductance Tolerance DC Resistance Max Min. Self Resonant Frequency Saturation Current Typ Saturation Current Max Temperature Rise Current Typ Temperature Rise Current Max Units μH % Ω Max MHz A Typ A Max A Typ A Max Symbol L M ASPI-2010HC-R24 0.24 M 0.040 145 5.50 4.50 3.45 3.00 ASPI-2010HC-R47 0.47 M 0.049 102 4.70 4.00 3.10 2.70 ASPI-2010HC-R68 0.68 M 0.065 77 4.00 3.50 2.80 2.50 ASPI-2010HC-1R0 1.0 M 0.090 70 3.85 3.35 2.35 2.05 ASPI-2010HC-2R2 2.2 M 0.170 39 2.15 1.90 1.70 1.45 ASPI-2010HC-100 10 M 0.826 15 0.95 0.80 0.75 0.65 SRF Min Isat Irms Test Conditions: a. Ambient Temperature: 20± 15oC b. Relative Humidity: 65%±20% c. Air Pressure: 86KPa to 106KPa Inductance (L): WK3260B LCR meter or equivalent, 1MHz, 1V. Direct Current Resistance (DCR): HIOKI 3540 or equivalent. Saturation Current (Isat): WK3260B LCR meter or equivalent. Temperature rise current (Irms): Electric Power, Electric current meter, Thermometer. Saturation Current Max: DC current at which the inductance drops less than 30% from its value without current. Saturation Current Typ: DC current at which the inductance drops approximate 30% from its value without current. Irms: DC current that causes the temperature rise (ΔT) from 20°C ambient. ΔT＜40°C for Irms max; ΔT is approximate 40°C for Irms typ. OPTIONS AND PART IDENTIFICATION ASPI-2010HC- Inductance Code Please refer to the table above ABRACON IS ISO9001:2008 CE RTIFIED - Tolerance M: ±20% Packaging T: Tape and Reel (2kpcs / reel) Revised: 01.07.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Wire Wound Magnetically Shielded SMD Power Inductor (High Current) ASPI-2010HC Pb RoHS/RoHS II Compliant 2.0 x 1.6 x 1.0 mm ELECTRICAL CHARACTERISTICS CURVES OUTLINE DIMENSIONS: Recommended Land Pattern Δf: Clearance between terminal and the surface of plate must be 0.1mm max when coil is placed on a flat plate. A B C Max. D E F a Typ. b Typ. c Typ. 2.0±0.2 1.6±0.2 1.0 1.2±0.2 0.60±0.2 0.80±0.2 0.70 0.70 1.70 Dimensions: mm Materials ABRACON IS ISO9001:2008 CE RTIFIED No Components Material 1 Core Soft magnetic metal 2 Wire Polyurethane system enameled copper wire 3 Magnetic Glue 4 Substrate 5 Top Electrodes Epoxy resin and magnetic powder FeNiCu/Ag Sn alloy Revised: 01.07.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Wire Wound Magnetically Shielded SMD Power Inductor (High Current) ASPI-2010HC Pb RoHS/RoHS II Compliant 2.0 x 1.6 x 1.0 mm REFLOW PROFILE: Δ Preheat condition: 150 ~200˚C /60~120sec. Δ Allowed time above 217˚C: 60~90sec. Δ Max temp: 260˚C Δ Max time at max temp: 5sec. Δ Solder paste: Sn/3.0Ag/0.5Cu Δ Allowed Reflow time: 2x max TAPE & REEL: T: 2,000pcs / reel Ao Bo W E F Po P1 1.90±0.05 2.20±0.05 8.0±0.1 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.1 P2 2.0±0.05 Do T K 1.5+0.1/-0.0 0.25±0.02 1.20±0.05 Storage Conditions a. b. c. d. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. Recommended conditions: -10oC ~ +40 oC, 70% RH (Max.) Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product should be used within one year from the time of delivery. Dimension: mm In case of storage over 6 months, solderability shall be checked before actual usage. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 01.07.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com