ASPI-2510-100M-T2

Low Profile Shielded SMD Chip Power Inductor ASPI-2510 series Pb RoHS Compliant 2.5 x 2.0 x 1.0mm FEATURES: APPLICATIONS: • • • • • • Mobile phones • MP3 & 4 and other portable communication equipment • Digital cameras. Small size and low profile: 1.0mm Small DCR and high rated current High reliability to mechanical stress Magnetically shielded by magnetic powder molding Suitable for RoHS reflow profile ELECTRICAL SPECIFICATIONS: Abracon P/N: Operating Temperature & Humidity : Storage Temperature & Humidity: ASPI-2510 Series -25˚C to +120˚C (Including self generated heat) -10˚C to +40˚C, 30% to 70% RH Part Number Inductance DCR Units Symbol ASPI-2510-R47 ASPI-2510-R68 ASPI-2510-1R0 ASPI-2510-1R5 ASPI-2510-2R2 ASPI-2510-3R3 ASPI-2510-4R7 ASPI-2510-6R8 ASPI-2510-100 μH L 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 mΩ ± 20% DCR 38 52 70 107 158 229 332 443 712 Saturation Current A Isat* 2.50 2.05 1.75 1.45 1.20 0.94 0.80 0.68 0.56 Temperature Rise Current A Irms* 2.65 2.20 1.90 1.50 1.20 1.00 0.82 0.71 0.55 Test Conditions 1. Inductance is measured in HP-4285A Precision LCR Meter. 2. RDC is measured in DU-5011 milli ohm meter.(or equivalent). 3. Isat : Based on inductance change (∆ L/Lo :≤ -30%) 4. Irms : Based on temperature rise (∆ T : 40oC TYP. ) 5. Test Freq: 100KHz, 1Vrms OPTIONS AND PART IDENTIFICATION ASPI-2510Inductance Code Please refer to the Electrical Spec Table Tolerance N: ±30%* M: ±20%* Packaging T2: Tape and Reel (2kpcs / reel) *N for L = 0.47~1.5µH *M for L = 2.2 ~ 10µH ABRACON IS ISO9001:2008 CE RTIFIED Revised: 09.06.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com Low Profile Shielded SMD Chip Power Inductor ASPI-2510 series Pb RoHS Compliant 2.5 x 2.0 x 1.0mm OUTLINE DRAWING: Mechanical Dimensions Circuit Schematic A B C Max. 2.5±0.1 2.0±0.1 1.0 Recommended Land Pattern Materials No 1 2 3 4 Part Name Ferrite core Terminals Coil Adhesive Magnetic Powder Material Ni-Zn Ferrite Ag/Ni/Sn Cu/P180 Grd 1 Silicon Base Resin Ni-Zn Ferrite Dimension: mm ABRACON IS ISO9001:2008 CE RTIFIED Revised: 09.06.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com Low Profile Shielded SMD Chip Power Inductor ASPI-2510 series Pb RoHS 2.5 x 2.0 x 1.0mm Compliant TAPE & REEL: T: 2,000pcs / reel A 2.27 B 2.74 K 1.40 F 4 T 0.25 Dimension: mm REFLOW PROFILE: ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 09.06.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com