ASPI-2512-6R8M-T2

Low Profile Shielded SMD Chip Power Inductor ASPI-2512 Series Request Samples 2.5 x 2.0 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Applications Features • • • • • Check Inventory Small size and low profile: 1.2mm Small DCR and high rated current High reliability to mechanical stress Magnetically shielded by magnetic powder molding Suitable for RoHS reflow profile • • • Mobile phones MP3 & 4 and other portable communication equipment Digital cameras. Electrical Specifications Part Number Inductance Units Symbol ASPI-2512-R47 ASPI-2512-R68 ASPI-2512-1R0 ASPI-2512-1R2 ASPI-2512-1R5 ASPI-2512-2R2 ASPI-2512-2R7 ASPI-2512-3R3 ASPI-2512-3R6 ASPI-2512-4R3 ASPI-2512-4R7 ASPI-2512-5R1 ASPI-2512-5R6 ASPI-2512-6R2 ASPI-2512-6R8 ASPI-2512-7R5 ASPI-2512-8R2 ASPI-2512-9R1 ASPI-2512-100 ASPI-2512-120 ASPI-2512-150 ASPI-2512-220 μH L 0.47 0.68 1.0 1.2 1.5 2.2 2.7 3.3 3.6 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10.0 12.0 15.0 22.0 Inductance Tolerance % M, N N N N N N M M M M M M M M M M M M M M M M M DCR mΩ ± 20% Max Typ 0.061 0.047 0.074 0.057 0.090 0.069 0.129 0.099 0.147 0.113 0.216 0.166 0.239 0.184 0.264 0.203 0.348 0.268 0.377 0.290 0.377 0.290 0.500 0.385 0.538 0.414 0.542 0.417 0.581 0.447 0.611 0.470 0.658 0.506 0.690 0.531 0.690 0.531 1.075 0.827 1.591 1.224 1.976 1.520 Saturation Current A Isat 3.82 3.28 2.59 2.38 2.24 1.85 1.72 1.61 1.46 1.37 1.12 1.23 1.11 1.03 0.98 0.97 0.98 0.91 0.79 0.78 0.68 0.53 Temperature Rise Current A Irms 2.15 1.95 1.93 1.46 1.40 1.15 1.09 1.04 0.90 0.87 0.84 0.75 0.73 0.73 0.69 0.68 0.65 0.62 0.62 0.51 0.42 0.38 Test Conditions 1. Inductance is measured in HP-4285A Precision LCR Meter. 2. RDC is measured in DU-5011 milli ohm meter.(or equivalent). 3. Isat : Based on inductance change (∆ L/Lo :≤ -30%) 4. Irms : Based on temperature rise (∆ T : 40oC TYP. ) 5. Test Freq: 100KHz, 1Vrms Operating Temperature: -25°C ~ +120°C (including self-heating) Storage Temperature: -10°C ~ +40°C (in original packaging) 5101 Hidden Creek Ln, Spicewood TX 78669 Phone: 512-371-6159 Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISION D : 6/23/2022 ABRACON IS ISO9001-2015 CERTIFIED Low Profile Shielded SMD Chip Power Inductor ASPI-2512 Series Request Samples 2.5 x 2.0 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Check Inventory Part Identification ASPI-2512- - Inductane Code Tolerance Please refer to the electrical specifications table Packaging T2: Tape and Reel (2kpcs / reel) N: ±30% M: ±20% Mechanical Specifications Series ASPI-2512 A 2.5±0.1 B 2.0±0.1 C 1.2Max. Series ASPI-2512 D 2.0±0.2 a 0.80 Typ E 0.80±0.2 b 0.85 Typ Recommended Land Pattern F 0.80±0.2 c 2.00 Typ Dimensions: mm 5101 Hidden Creek Ln, Spicewood TX 78669 Phone: 512-371-6159 Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISION D : 6/23/2022 ABRACON IS ISO9001-2015 CERTIFIED Low Profile Shielded SMD Chip Power Inductor ASPI-2512 Series Request Samples 2.5 x 2.0 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Check Inventory Materials No. Components Material 1 Ferrite Core Ni-Zn Ferrite 2 Wire Polyurethane system enameled copper wire 3 Magnetic Glue Epoxy resin and magnetic powder 4 Electrodes AgNiSn or FeNiCu +Sn Alloy Reflow Profile Zone Description 1 Preheat 2 Reflow 3 Peak heat Temperature TSMIN ~ TSMAX 150°C ~ 200°C TL 217°C TP 260°C 5101 Hidden Creek Ln, Spicewood TX 78669 Phone: 512-371-6159 Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Times 60 ~ 90 sec. 60 ~ 90 sec. 5 sec. MAX REVISION D : 6/23/2022 ABRACON IS ISO9001-2015 CERTIFIED Low Profile Shielded SMD Chip Power Inductor ASPI-2512 Series Request Samples Check Inventory 2.5 x 2.0 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Packaging T2: 2,000pcs/Reel A0 2.35±0.05 B0 2.65±0.05 Dimensions: mm W 8±0.3 E 1.75±0.1 F 3.5±0.05 P0 4.0±0.1 P1 4.0±0.1 P2 2.0±0.1 D0 1.5+0.1./-0.0 T 0.25±0.03 K0 1.4±0.1 ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. 5101 Hidden Creek Ln, Spicewood TX 78669 Phone: 512-371-6159 Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISION D : 6/23/2022 ABRACON IS ISO9001-2015 CERTIFIED