ASPI-3012S-820M-T

SMD SHIELDED POWER INDUCTOR ASPI-3012S Pb 3.0 x 3.0 x 1.2mm APPLICATIONS: FEATURES: • • • • RoHS/RoHS II Compliant • • • • Shielded magnetics, low radiation Large Terminal surface for good PCB bonding Low DCR, High Energy storage, suitable for large currents Ideal for a variety of DC-DC converter inductor applications Partable communication equipment OA equipment LCD, DVD, modem, set-top box DC/DC converters ELECTRICAL SPECIFICATIONS: Abracon P/N: ASPI-3012S Series Operating Temperature Storage Temperature -40ºC to +125ºC : -10ºC to +40ºC and 70% R.H. : Part Number ASPI-3012SInductance Code Inductance L Tolerance DC Resistance (±30%) Saturation Current Temperature Rise Current Min. Self resonant frequency Inductance Code Units μH − Ω A A MHz Symbol L N, M DCR Isat Irms SRF ASPI-3012S-R82 0.82 N 0.030 2.05 2.47 180 R82 ASPI-3012S-1R0 1.0 N 0.040 1.87 2.20 120 1R0 ASPI-3012S-1R2 1.2 N 0.045 2.22 2.01 120 1R2 ASPI-3012S-1R5 1.5 N 0.045 1.62 2.01 110 1R5 ASPI-3012S-1R8 1.8 N 0.063 1.30 1.65 90 1R8 ASPI-3012S-2R2 2.2 N 0.075 1.20 1.55 84 2R2 ASPI-3012S-2R4 2.4 N 0.068 1.15 1.60 100 2R4 ASPI-3012S-2R7 2.7 M,N 0.085 1.14 1.48 65 2R7 ASPI-3012S-3R3 3.3 M,N 0.100 1.05 1.36 64 3R3 ASPI-3012S-3R9 3.9 M,N 0.145 1.00 1.24 61 3R9 ASPI-3012S-4R7 4.7 M,N 0.120 0.90 1.24 61 4R7 ASPI-3012S-6R8 6.8 M,N 0.190 0.75 0.98 61 6R8 ASPI-3012S-100 10 M,N 0.265 0.60 0.83 42 100 ASPI-3012S-120 12 M,N 0.345 0.48 0.73 32 120 ASPI-3012S-150 15 M,N 0.360 0.45 0.71 27 150 ASPI-3012S-180 18 M,N 0.545 0.43 0.58 25 180 ASPI-3012S-220 22 M,N 0.645 0.42 0.53 23 220 ASPI-3012S-270 27 M,N 0.870 0.35 0.47 21 270 ASPI-3012S-330 33 M,N 0.875 0.36 0.46 18 330 ASPI-3012S-360 36 M,N 0.950 0.34 0.44 18 360 ASPI-3012S-390 39 M,N 1.330 0.30 0.37 18 390 ASPI-3012S-470 47 M,N 1.450 0.27 0.35 14 470 ASPI-3012S-680 68 M,N 1.670 0.24 0.33 12 680 ASPI-3012S-820 82 M,N 2.540 0.17 0.27 12 820 ASPI-3012S-101 100 M,N 2.860 0.21 0.25 12 101 Test Conditions: a. Ambient Temperature: 20± 15oC b. Relative Humidity: 65%±20% c. Air Pressure: 86KPa to 106KPa ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CERTIFIED t. Inductance (L): ZM2355 LCR meter or equivalent, 100kHz, 1Vrms Direct Current Resistance (DCR): HIOKI 3540 or equivalent Saturation Current (Isat): E3260B meter or equivalent Isat: Based on inductance change (Δ L/Lo :Δ -30%) Temperature rise current (Irms): Electric Power, Electric current meter, Thermometer Irms: Based on temperature rise (Δ T : 40 oC TYP. ) Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.14.13 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD SHIELDED POWER INDUCTOR ASPI-3012S Pb RoHS/RoHS II Compliant 3.0 x 3.0 x 1.2mm ELECTRICAL SPECIFICATIONS: OPTIONS AND PART IDENTIFICATION ASPI-3012S - t. Inductance Code Please refer to the table above Tolerance M: ±20% * N: ±30% * Packaging T: Tape and Reel (2kpcs / reel) *M for 2.7µH~100µH *N for 0.82µH~100µH ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.14.13 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD SHIELDED POWER INDUCTOR ASPI-3012S Pb RoHS/RoHS II Compliant 3.0 x 3.0 x 1.2mm OUTLINE DIMENSIONS: Recommended Land Pattern A 3.0±0.2 B 3.0±0.2 C Max. 1.2Max. D 2.5±0.2 E 0.75±0.2 F 1.5±0.2 a Typ. 1.5Typ. b Typ. 0.8Typ. c Typ. 2.7Typ Dimensions: mm Materials No Components Material 1 Ferrite Core 2 Wire 3 Magnetic Glue 4 Plating Electrodes Plating: Ag/Ni/Sn 5 Outer Electrodes Top surface solder coating: Sn96.5%/Ag3%/Cu0.5% Ni-Zn Ferrite Polyurethane System enameled copper wire Epoxy resin and magnetic powder REFLOW PROFILE: Δ Δ Δ Δ Δ Δ ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CERTIFIED Preheat condition: 150 ~200oC/60~120sec. Allowed time above 217C: 60~90sec. Max temp: 260oC Max time at max temp: 5sec. Solder paste: Sn/3.0Ag/0.5Cu Allowed Reflow time: 2x max Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.14.13 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD SHIELDED POWER INDUCTOR ASPI-3012S RoHS/RoHS II Compliant Pb 3.0 x 3.0 x 1.2mm TAPE & REEL: A0 B0 W E F P0 P1 P2 D0 T K 3.3±0.1 3.3±0.1 8.0±0.3 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.1 2.0±0.1 1.5+0.1/-0.0 0.25±0.03 1.6±0.1 Storage Conditions a. b. c. d. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. Recommended conditions: -10oC ~ 40 oC, 70% RH (Max.) Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product should be used with one year from the time of delivery. In case of storage over 6 months, solderability shall be checked before actual usage. Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.14.13 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com