ASTMLPD-50.000MHZ-LJ-E-T3

Low power, Programmable SMD MEMS Oscillator ASTMLP Pb ESD Sensitive Moisture Sensitivity Level (MSL) – 1 FEATURES: ASTMLP RoHS/RoHS II compliant 2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm; 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm APPLICATIONS: • GPON, EPON • Portable devices • Consumer electronics • Network switches, router, servers • Ethernet, USB, SATA, SAS, Firewire • Harsh environment (vibration, shock-prone and humid) • Industry Standard package sizes: 2.0 x 1.6 x 0.75mm, 2.5 x 2.0 x 0.75mm, 3.2 x 2.5 x 0.75mm, 5 x 3.2 x 0.75mm, 7.0 x 5.0 x 0.9mm • Any frequency between 1MHz and 137MHz • Supply Voltage options: 3.3V, 3.0V, 2.8V, 2.5V, 1.8V, 2.25V ~ 3.63V • Low Current Consumption: 3.5mA typ. (@20MHz, 1.8V, no load); 4.9mA typ. (@125MHz, 1.8V, no load) • Frequency Stability options: ±20ppm, ±25ppm, ±50ppm over -20 to +70°C and -40 to +85°C • Factory programmable drive strength for improved jitter, reduced EMI or higher capacitive output load STANDARD SPECIFICATIONS: All Min and Max limits are specified over temperature and rated operating voltage with 15pF output load unless otherwise stated. Typical values are at 25°C and nominal supply voltage. Parameters Min Typ Max Unit Notes 1 110 Output Frequency Range (F) MHz 115 137 See Section 1.1 for Standard Frequencies MHz Standard Frequencies Inclusive of initial tolerance at 25°C, 1st -20 +20 year aging at 25°C, and variations over Frequency Stability (Fstab) -25 +25 ppm operating temperature, rated power -50 +50 supply voltage and load (15pF±10%) Option “E” -20 +70 °C Operating Temperature Range (Tuse) Option “L” -40 +85 Option “18” 1.62 1.8 1.98 Option “25” 2.25 2.5 2.75 Option “28” 2.52 2.8 3.08 Supply Voltage (Vdd) V Option “30” 2.7 3.0 3.3 Option “33” 2.97 3.3 3.63 Option “Blank” (default) 2.25 3.63 Current Consumption ( Idd ) 3.8 4.5 3.7 3.5 4.2 4.1 6.2 7.5 5.5 4.9 6.4 5.6 4.2 OE Disable Current (IOD) 4.0 Standby Current (Istd) Startup Time (Tstart) 2.6 4.3 1.4 2.5 0.6 1.3 5 130 Enable/Disable Time (Toe) 122 Resume Time ( Tresume) 5 LLC No load, F=20MHz, Vdd=2.8V,3.0V,3.3V or 2.25V-3.63V No load, F=20MHz, Vdd=2.5V mA No load, F=20MHz, Vdd=1.8V No load, F=125MHz, Vdd=2.8V,3.0V,3.3V or 2.25V-3.63V No load, F=125MHz, Vdd=2.5V No load, F=125MHz, Vdd=1.8V mA µA ms ns ms Vdd=2.5V-3.3V, OE=GND, output is in High-Z state Vdd=1.8V, OE=GND, output is in High-Z state ST=GND, Vdd=2.8V-3.3V, output is weakly pulled down ST=GND, Vdd=2.5V, output is weakly pulled down ST=GND, Vdd=1.8V, output is weakly pulled down Measured from the time Vdd reaches its rated minimum value F=110MHz. For other frequencies, Toe=100ns+3*cycles F=137MHz. For other frequencies, Toe=100ns+3*cycles Measured from the time ST pin crosses 50% threshold 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED Low power, Programmable SMD MEMS Oscillator ASTMLP Pb ASTMLP RoHS/RoHS II compliant 2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm; 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm (Continued) Parameters Min Output Type Duty Cycle Typ Max Unit 55 2 2.5 2 % Notes LVCMOS 45 1 1.3 Rise/Fall Time ( Tr /Tf) All Vdd options Vdd=2.5V, 2.8V, 3.0V or 3.3V, 20%-80% ns Vdd=1.8V, 20%-80% Vdd=2.25V-3.63V, 20%-80% IOH=-4mA (Vdd=3.0V or 3.3V) Output High Voltage (VOH) 90%*Vdd V IOH=-3mA (Vdd=2.8V or 2.5V) IOH=-2mA (Vdd=1.8V) IOL=4mA (Vdd=3.0V or 3.3V) Output Low Voltage (VOL) 10%*Vdd V IOL=3mA (Vdd=2.8V or 2.5V) IOL=2mA (Vdd=1.8V) Input High Voltage(VIH) Input Low Voltage(VIL) 70%*Vdd 50 Input Pull-up Impedance ( Zin) Peak-to-peak Period Jitter (Tpk) RMS Phase Jitter (random) ( Tphj) Standard Frequency (MHz) 4 19.2 30 37.5 62.5 74.175824 150 kΩ 2 RMS Period Jitter ( Tjitt) 3.57 18.432 28.6363 33.3333 60 72 87 30%*Vdd V V 4.096 20 31.25 38 65 74.176 LLC MΩ 1.8 3 1.8 3 1.9 3 1.8 4 12 25 14 30 0.5 0.9 1.3 2 Standard Frequency (MHz) 6 7.3728 8.192 24 24.576 25 32.768 33 33.3 38.4 40 40.5 66 66.66 66.66 74.25 75 77.76 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Pin 1 Pin 1 Pin 1, OE logic high or logic low, ST logic high Pin 1, ST logic low F=75MHz, Vdd=2.5V, 2.8V, 3.0V or 3.3V ps F=75MHz, Vdd=1.8V F=125MHz, Vdd=2.5V, 2.8V, 3.0V or 3.3V F=125MHz, Vdd=1.8V ps ps F=75MHz, 125MHz, Vdd=2.5V, 2.8V, 3.0V or 3.3V F=75MHz, 125MHz, Vdd=1.8V F=75MHz, integration bandwidth=900kHz to 7.5MHz F=75MHz, integration bandwidth=12kHz to 20MHz 10 25.000625 33.33 48 66.666 12 26 33.333 50 66.6666 14 27 33.3333 54 66.66666 ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED Low power, Programmable SMD MEMS Oscillator ASTMLP Pb ASTMLP RoHS/RoHS II compliant 2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm; 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm Absolute Maximum Ratings Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings. Parameters Storage Te mperature VDD Electrostatic Discharge (HBM) Soldering Temperature (follow standard Pb free soldering guidelines) Junction Temperature (1) Min. -65 -0 . 5 Max. 150 4 2000 Unit °C V V 260 °C 150 °C Note: 1. Exceeding this temperature for extended period of time may damage the device Thermal Consideration θJA, 4 Layer Board (°C/W) 142 97 Package 7.0 x 5.0mm 5.0 x 3.2mm 3.2 x 2.5mm 2.5 x 2.0mm 2.0 x 1.6mm 109 117 152 θJA, 2 Layer Board (°C/W) 273 199 212 222 252 θJC, Bottom (°C/W) 30 24 27 26 36 Maximum Operating Junction Temperature (2) Max. Operating Temperature (ambient) 70°C 85°C Max. Operating Junction Temperature 80°C 95°C Note: 2. Datasheet specifications are not guaranteed if junction temperature exceeds the maximum operating junction temperature PART IDENTIFICATION: ASTMLP - Package Size A: 2.0x1.6mm D: 2.5x2.0mm E: 3.2x2.5mm FL: 5.0x3.2mm V: 7.0x5.0mm - Output Frequency in MHz e.g. 7.3728, 125.000 MHz- Operating Temp. E: -20°C ~ +70°C L: -40°C ~ +85°C Freq. Stability J: ±20ppm R: ±25 ppm C: ±50 ppm Supply Voltage Blank: 2.25V~3.63V 18: 1.8V±10% 25: 2.5V±10% 28: 2.8V±10% 30: 3.0V±10% 33: 3.3V±10% LLC - - Pin 1 Function E: Output Enable S: Standby N: No Connect Packaging Blank: Bulk T: Tape & Reel (1kpcs / reel) T3: Tape & Reel (3kpcs / reel) Output Drive Strength* Blank: Default L** A** R B T E U F * See Table 1 to 5 for the Rise/Fall times at different drive strength and available options ** Only available for F=1MHz~110MHz 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED Low power, Programmable SMD MEMS Oscillator ASTMLP Pb ASTMLP RoHS/RoHS II compliant 2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm; 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm Table 1: Vdd=1.8V Rise/Fall Times for Specific CLOAD (a) Output Frequency: 1MHz – 110MHz Rise/Fall Time Typ. (ns) Drive CLOAD Strength 5pF 15pF 30pF 45pF Options 6.16 11.61 22.00 31.27 L 3.19 6.35 11.00 16.01 A 2.11 4.31 7.65 10.77 R 1.65 3.23 5.79 8.18 B 0.93 1.91 3.32 4.66 T 0.78 1.66 2.94 4.09 E 0.70 1.48 2.64 3.68 U F or Blank 0.65 1.30 2.40 3.35 (default) 60pF 39.91 21.52 14.47 11.08 6.48 5.74 5.09 (b) Output Frequency: 115MHz – 137MHz Rise/Fall Time Typ. (ns) CLOAD Drive Strength Options 5pF 15pF 0.93 N/A T 0.78 N/A E 0.70 1.48 U F or Blank 0.65 1.30 (default) 4.56 Table 2: Vdd=2.5V Rise/Fall Times for Specific CLOAD (a) Output Frequency: 1MHz – 110MHz Rise/Fall Time Typ. (ns) CLOAD Drive Strength Options 5pF 15pF 30pF 45pF 4.13 8.25 12.82 21.45 L 2.11 4.27 7.64 11.20 A 1.45 2.81 5.16 7.65 R 1.09 2.20 3.88 5.86 B 0.62 1.28 2.27 3.51 T E or Blank 0.54 1.00 2.01 3.10 (default) 0.43 0.96 1.81 2.79 U 0.34 0.88 1.64 2.54 F 60pF 27.79 14.49 9.88 7.57 4.45 4.01 3.65 3.32 (b) Output Frequency: 115MHz – 137MHz Rise/Fall Time Typ. (ns) CLOAD Drive Strength Options 5pF 15pF 1.45 N/A R 1.09 N/A B 0.62 1.28 T E or Blank 0.54 1.00 (default) 0.43 0.96 U 0.34 0.88 F Table 3: Vdd=2.8V Rise/Fall Times for Specific CLOAD (a) Output Frequency: 1MHz – 110MHz Rise/Fall Time Typ. (ns) CLOAD Drive Strength Options 5pF 15pF 30pF 45pF 3.77 7.54 12.28 19.57 L 1.94 3.90 7.03 10.24 A 1.29 2.57 4.72 7.01 R 0.97 2.00 3.54 5.43 B 0.55 1.12 2.08 3.22 T E or Blank 0.44 1.00 1.83 2.82 (default) 0.34 0.88 1.64 2.52 U 0.29 0.81 1.48 2.29 F LLC 60pF 25.27 13.34 9.06 6.93 4.08 3.67 3.30 2.99 (b) Output Frequency: 115MHz – 137MHz Rise/Fall Time Typ. (ns) CLOAD Drive Strength Options 5pF 15pF 30pF 1.29 N/A N/A R 0.97 N/A N/A B 0.55 1.12 N/A T N/A E or Blank 0.44 1.00 (default) 0.34 0.88 N/A U 0.29 0.81 1.48 F 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED Low power, Programmable SMD MEMS Oscillator ASTMLP Pb ASTMLP RoHS/RoHS II compliant 2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm; 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm Table 4: Vdd=3.0V Rise/Fall Times for Specific CLOAD (a) Output Frequency: 1MHz – 110MHz Rise/Fall Time Typ. (ns) CLOAD Drive Strength Options 5pF 15pF 30pF 45pF 3.60 7.21 11.97 18.74 L 1.84 3.71 6.72 9.86 A 1.22 2.46 4.54 6.76 R 0.89 1.92 3.39 5.20 B T or Blank 0.51 1.00 1.97 3.07 (default) 0.38 0.92 1.72 2.71 E 0.30 0.83 1.55 2.40 U 0.27 0.76 1.39 2.16 F 60pF 24.30 12.68 8.62 6.64 3.90 3.51 3.13 2.85 (b) Output Frequency: 115MHz – 137MHz Rise/Fall Time Typ. (ns) CLOAD Drive Strength Options 5pF 15pF 30pF 1.22 N/A N/A R 0.89 N/A N/A B N/A T or Blank 0.51 1.00 (default) 0.38 0.92 N/A E 0.30 0.83 N/A U 0.27 0.76 1.39 F Table 5: Vdd=3.3V Rise/Fall Times for Specific CLOAD (a) Output Frequency: 1MHz – 110MHz Rise/Fall Time Typ. (ns) CLOAD Drive Strength Options 5pF 15pF 30pF 45pF 3.39 6.88 11.63 17.56 L 1.74 3.50 6.38 8.89 A 1.16 2.33 4.29 6.04 R 0.81 1.82 3.22 4.52 B T or Blank 0.46 1.00 1.86 2.60 (default) 0.33 0.87 1.64 2.30 E 0.28 0.79 1.46 2.05 U 0.25 0.72 1.31 1.83 F 60pF 23.59 12.19 8.34 6.33 3.84 3.35 2.93 2.61 (b) Output Frequency: 115MHz – 137MHz Rise/Fall Time Typ. (ns) CLOAD Drive Strength Options 5pF 15pF 30pF 1.16 N/A N/A R 0.81 N/A N/A B N/A T or Blank 0.46 1.00 (default) 0.33 0.87 N/A E 0.28 0.79 1.46 U 0.25 0.72 1.31 F CALCULATING MAXIMUM FREQUENCY Based on the rise and fall time data given in Table 1 through 5, the maximum frequency the oscillator can operate with a guaranteed full swing of the output voltage over temperature is calculated as follows: 1 Example: Calculate Fmax of a 1MHz ~ 110MHz device with the following condition: º Vdd = 1.8V (Table 1) º Capacitive Load = 30pF º Desired Tr/f Time: = 3ns (rise/fall time option code “E”) The Fmax is 66.66666MHz. LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED Low power, Programmable SMD MEMS Oscillator ASTMLP Pb ASTMLP RoHS/RoHS II compliant 2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm; 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm TYPICAL PERFORMANCE DATA All plots are measured with 15pF load at room temperature, unless otherwise stated. IDD vs. Frequency 1MHz-110MHz Devices 115MHz -137MHz Devices Frequency vs. Temperature 1MHz-110MHz Devices 115MHz -137MHz Devices LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED Low power, Programmable SMD MEMS Oscillator ASTMLP Pb ASTMLP RoHS/RoHS II compliant 2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm; 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm TYPICAL PERFORMANCE DATA RMS Period Jitter vs. Frequency 1MHz-110MHz Devices 115MHz -137MHz Devices Duty Cycle vs. Frequency 1MHz-110MHz Devices 115MHz -137MHz Devices LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED Low power, Programmable SMD MEMS Oscillator ASTMLP Pb ASTMLP RoHS/RoHS II compliant 2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm; 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm TYPICAL PERFORMANCE DATA 20% - 80% Rise Time vs. Temperature 1MHz-110MHz Devices 115MHz -137MHz Devices 20% - 80% Fall Time vs. Temperature 1MHz-110MHz Devices 115MHz -137MHz Devices LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED Low power, Programmable SMD MEMS Oscillator ASTMLP Pb ASTMLP RoHS/RoHS II compliant 2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm; 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm TYPICAL PERFORMANCE DATA RMS Integrated Phase Jitter Random (12kHz to 20MHz) vs Frequency (3) 1MHz-110MHz Devices 115MHz -137MHz Devices RMS Integrated Phase Jitter Random (900kHz to 20MHz) vs Frequency (3) 1MHz-110MHz Devices 115MHz -137MHz Devices Notes: 3. Phase noise plots are measured with Agilent E5052B signal source analyzer. Integration range is up to 5MHz for carrier frequencies below 40MHz. LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED Low power, Programmable SMD MEMS Oscillator ASTMLP Pb ASTMLP RoHS/RoHS II compliant 2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm; 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm OUTLINE DIMENSION: 2.0 x 1.6mm Package (Option “A”) Recommended Land Pattern 2.5 x 2.0mm Package (Option “D”) Recommended Land Pattern 3.2 x 2.5mm Package (Option “E”) Recommended Land Pattern LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED Low power, Programmable SMD MEMS Oscillator ASTMLP Pb ASTMLP RoHS/RoHS II compliant 2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm; 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm OUTLINE DIMENSION: 5.0 x 3.2mm Package (Option “FL”) Recommended Land Pattern 7.0 x 5.0mm Package (Option “V”) Recommended Land Pattern Pin Name Output Enable 1 OE/ST Standby No Connect 2 3 4 GND Out Vdd Power Output Power Functionality H or Open (4): specified frequency output L: output is high impedance. Only output driver is disabled H or Open (4): specified frequency output L: output is low (weak pull down). Device goes to sleep mode. Supply current reduces to Istd. Any voltage between 0 and Vdd or Open (4): specified frequency output. Pin 1 has no function. Electrical ground (5) Oscillator clock output Power supply voltage (5) Notes: 4. In OE or ST mode, a pull-up resistor of