ASTMUPLPFL-156.250MHZ-LJ-E-T

Engineering/Process Change Notice ECN/PCN No.: 4119 For Manufacturer Product Description: PLASTIC SMD MEMS OSCILLATOR Abracon Part Number / Part Series: ASTMUPLP Affected Revision: New Revision: I.R. EOL ☐ Documentation only ☐ ECN ☒ EOL Application: ☒ Series ☐ Part Number ☐ Safety ☒ Non-Safety Prior to Change: Active https://abracon.com/Oscillators/ASTMUPLP.pdf After Change: EOL Cause/Reason for Change: Discontinuation of manufacturing capability. Change Plan Effective Date: 2/7/2022 Additional Remarks: N/A Change Declaration: N/A Issued Date: Approval: 2/7/2022 Thomas Culhane Engineering Director Issued By: Approval: Brooke Cushman Product Engineer Reuben Quintanilla Quality Director Issued Department: Engineering Approval: Ying Huang Purchasing Director For Abracon EOL only Last Time Buy (if applicable): 5/7/2022 Additional Approval: Alternate Part Number / Part Series: ASEDV (3.2x2.5mm), ASFLDV (5.0x3.2mm), ASVDV (7.0x5.0mm) Additional Approval: Additional Approval: Customer Approval (If Applicable) Qualification Status: ☐ Approved ☐ Not accepted Note: It is considered approved if there is no feedback from the customer 1 month after ECN/PCN is released. Customer Part Number: Company Name: Customer Project: Company Representative: Customer Remarks: Form #7020 | Rev. G | Effective: 02/22/2021 | Page 1 of 1 Representative Signature: ASTMUPL High Performance, Programmable LVPECL SMD MEMS Oscillator ASTMUPLP Pb ESD Sensitive Moisture Sensitivity Level (MSL) – 1 FEATURES: RoHS/RoHS II compliant P 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm APPLICATIONS: • 10GB Ethernet, SONET, SATA, SAS, Fiber Channel, PCI Express • Storage • Servers • Networking • Telecom • Instrumentation • Harsh environment (vibration, shock-prone and humid) • Industry Standard package sizes: 3.2 x 2.5 x 0.75mm, 5 x 3.2 x 0.75mm, 7.0 x 5.0 x 0.9mm • Any frequency between 1MHz and 625MHz • Supply Voltage options: 3.3V, 2.8V, 1.8V, 2.25V~3.63V • Ultra-low RMS phase jitter: 0.6ps typ. (@156.25MHz, integration bandwidth: 12kHz to 20MHz) • Frequency Stability options: ±10ppm, ±20ppm, ±25ppm, ±50ppm over -20 to +70°C and -40 to +85°C STANDARD SPECIFICATIONS: Output Frequency Range (F) Frequency Stability (Fstab) Min Operating Temperature Range (Tuse) Max Unit Notes 1 625 MHz See Note 1 for Frequencies not supported -10 -20 -25 -50 -20 -40 -2 -5 2.25 2.97 2.25 70%*Vdd +10 +20 +25 +50 +70 +85 +2 +5 2.75 3.63 3.63 ppm Inclusive of initial tolerance at 25°C, and variations over operating temperature, rated power supply voltage and load °C Option “E” Option “L” ppm EO Aging@25°C 1st year 10 years Typ L Parameters Supply Voltage (Vdd) Input High Voltage(VIH) Input Low Voltage(VIL) Input Pull-up Impedance ( Zin) 2.5 3.3 - 100 Option “25” V Option “33” Option “Blank” (default) 30%*Vdd V V 250 kΩ Pin 1, OE logic high or logic low, ST logic high MΩ Pin 1, ST logic low 2 Pin 1 Pin 1 Startup Time (Tstart) 6 10 ms Measured from the time Vdd reaches its rated minimum value Resume Time ( Tresume) 6 10 ms In standby mode. Measured from the time ST pin crosses 50% threshold 55 % 69 mA Excluding load termination current, Vdd=2.5V or 3.3V 35 mA OE=Low Duty Cycle Output Type 45 LV P E C L Current Consumption ( Idd ) 61 OE Disable Current (IOD) Output Disable Leakage Current ( Ileak) Standby Current (Istd) 1 µA OE=Low 100 µA Maximum Output Current ( Idriver) 30 mA ST =Low, for all Vdd Maximum average current drawn from OUT+ or OUT- Note: 1. Frequencies not supported: Range 1: From 209.000001MHz to 210.999999MHz Range 2: From 251.000001MHz to 263.999999MHz Range 3: From 314.000001MHz to 422.999999MHz Range 4: From 502.000001MHz to 527.999999MHz LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED ASTMUPL High Performance, Programmable LVPECL SMD MEMS Oscillator ASTMUPLP Pb P 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm RoHS/RoHS II compliant (Continued) Parameters Min Typ Max Unit Output High Voltage (VOH) Vdd – 1.1 Vdd – 0.7 V Output Low Voltage (VOL) Output Differential Voltage Swing ( VSwing) Vdd – 1.9 Vdd – 1.5 V 1.6 2.0 V 300 300 700 500 ps 115 ns 1.2 Rise/Fall Time ( Tr /Tf) OE Enable/Disable Time (Toe) 1.2 1.7 1.2 1.7 0.6 0.85 ps 20%-80%, Freq. = 1MHz~220MHz 20%-80%, Freq. = 220MHz~625MHz F=212.5MHz, 220MHz. For other frequencies, Toe=100ns+3*cycles F=100MHz, 156.25MHz, 212.5MHz, Vdd=2.5V or 3.3V F=266MHz, 312.5MHz, 622.08MHz, Vdd=2.5V or 3.3V L RMS Period Jitter ( Tjitt) Notes RMS Phase Jitter (random) ( Tphj) Standard Frequencies Standard Frequency (MHz) 74.250000 75.000000 98.304000 133.330000 133.333000 133.333300 155.520000 156.250000 161.132800 166.666660 166.666666 200.000000 EO 25.000000 50.000000 74.175824 125.000000 133.000000 133.300000 148.351648 148.500000 150.000000 166.660000 166.666000 166.666600 ps F=156.25MHz, 312.5MHz, integration bandwidth=12kHz to 20MHz 100.000000 133.333330 166.000000 212.500000 106.250000 133.333333 166.600000 Absolute Maximum Ratings Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings. Parameters Storage Te mperature VDD Electrostatic Discharge (HBM) Soldering Temperature (follow standard Pb free soldering guidelines) Min. -65 -0 . 5 Max. 150 4 2000 Unit °C V V 260 °C Thermal Consideration Package 7.0 x 5.0mm, 6-pin 5.0 x 3.2mm, 6-pin 3.2 x 2.5mm, 6-pin ABRACON IS LLC θJA, 4 Layer Board (°C/W) 142 97 109 θJC, Bottom (°C/W) 27 20 20 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED ASTMUPL High Performance, Programmable LVPECL SMD MEMS Oscillator ASTMUPLP Pb P 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm RoHS/RoHS II compliant PART IDENTIFICATION: ASTMUPLP - Output Frequency in MHz e.g. 7.3728, 625.000 MHz- - - Pin 1 Function E: Output Enable S: Standby Operating Temp. E: -20°C ~ +70°C L: -40°C ~ +85°C Freq. Stability Y: ±10ppm J: ±20ppm R: ±25 ppm C: ±50 ppm Packaging Blank: Bulk T: Tape & Reel (1kpcs / reel) T3: Tape & Reel (3kpcs / reel) L Package Size E: 3.2x2.5mm FL: 5.0x3.2mm V: 7.0x5.0mm - Supply Voltage Blank: 2.25V~3.63V 25: 2.5V±10% 33: 3.3V±10% EO RECOMMENDED TERMINATION DIAGRAM Vdd 3.3V 2.5V R1 133Ω 250Ω R2 82Ω 62.5Ω R3 133Ω 250Ω R4 82Ω 62.5Ω TYPICAL PHASE NOISE 100MHZ, 3.3V, LVPECL Output 312.5MHZ, 3.3V, LVPECL Output ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. ABRACON IS LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 12.14.2018 ISO9001-2015 CERTIFIED ASTMUPL High Performance, Programmable LVPECL SMD MEMS Oscillator ASTMUPLP Pb P 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm RoHS/RoHS II compliant OUTLINE DIMENSION: 3.2 x 2.5mm Package (Option “E”) Recommended Land Pattern Recommended Land Pattern EO L 5.0 x 3.2mm Package (Option “FL”) 7.0 x 5.0mm Package (Option “V”) Pin Recommended Land Pattern Name Output Enable 1 OE/ST 2 NC No Connect 3 4 5 6 GND Out+ OutVdd Power Output Output Power Standby Dimensions: mm Functionality H or Open: specified frequency output L: output is high impedance. Only output driver is disabled H or Open: specified frequency output L: output is low (weak pull down). Device goes to sleep mode. Supply current reduces to Istd. Leave it floating or connect to GND for better heat dissipation Vdd power supply ground(1) Oscillator output Complementary oscillator output Power supply voltage(1) Notes: 1. A capacitor value of 0.1µF between Vdd and GND is recommended. ABRACON IS ISO9001:2008 CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15 5101 Hidden Creek Ln Spicewood TX 78669 ABRACON IS Phone: 512-371-6159 | Fax: 512-351-8858 Ph. 949.546.8000 | Fax. 949.546.8001 ISO9001-2015 REVISED: 12.14.2018 LLC For terms and conditions of sales, please visit: Visit www.abracon.com for Terms and Conditions of Sale CERTIFIED www.abracon.com High Performance, Programmable LVPECL SMD MEMS Oscillator ASTMUPLP Pb RoHS/RoHS II compliant ASTMUPL P 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm L TYPICAL PERFORMANCE DATA REFLOW PROFILE: Conditions EO Item TS MAX to TL (Ramp-up Rate) 3°C/second max Preheat ABRACON IS ISO9001:2008 CE RTIFIED Temperature Minimum (TS MIN) 150°C Temperature Typical (TS TYP) 175°C Temperature Maximum (TS MAX) 200°C Time (tS) 60 – 180 seconds Ramp-up Rate (TL to TP) 3°C/second max Time Maintained Above Temperature (TL) 217°C Time (tL) 60 – 150 seconds Peak Temperature (TP) 260°C max Target Peak Temperature (TP Target) 255°C Time within 5°C of actual peak (tP) 20 – 40 seconds Max. Number of Reflow Cycles 3 Ramp-down Rate 6°C/second max Time 25°C to Peak Temperature (t) 8 minutes max LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15 5101 Hidden Creek Ln Spicewood TX 78669 ABRACON IS Phone: 512-371-6159 | Fax: 512-351-8858 Ph. 949.546.8000 | Fax. 949.546.8001 ISO9001-2015 REVISED: 12.14.2018 LLC For terms and conditions of sales, please visit: Visit www.abracon.com for Terms and Conditions of Sale CERTIFIED www.abracon.com ASTMUPL High Performance, Programmable LVPECL SMD MEMS Oscillator ASTMUPLP Pb P 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm RoHS/RoHS II compliant TAPE & REEL: 3225 5032 7050 D1 min. E1 E2 min. F P0 1.5 1.75±0.1 10.25 5.5±0.05 4.0±0.1 4.0±0.1 2.0±0.05 1.5 1.75±0.1 10.25 5.5±0.05 4.0±0.1 8.0±0.1 2.0±0.05 1.5 1.75±0.1 14.25 7.5±0.1 4.0±0.1 8.0±0.1 2.0±0.1 T 0.6 0.6 0.6 T1 max. 0.1 0.1 0.1 T2 max. 1.65 1.65 1.80 W max. 12.3 12.3 16.3 A0 2.8±0.10 3.5±0.10 5.4±0.10 B0 3.5±0.10 5.3±0.10 7.4±0.10 Unit: mm K0 1.10±0.10 1.10±0.10 1.3±0.10 D min. 20.2 20.2 20.2 20.2 N 60±0.5 100±0.5 60±0.5 100±0.5 EO Device Size 3225 5032 7050 Tape Size 12mm 16mm Unit: mm P1 P2 D0 1.5+0.1/0.0 1.5+0.1/0.0 1.5+0.1/0.0 L Device Size A max. 180 330 180 330 Device Size 3225 5032 7050 B min. 1.5 1.5 1.5 1.5 C 13.0±0.2 13.0±0.2 13.0±0.2 13.0±0.2 “T” (1k/reel) 12mm Tape 7” Reel 12mm Tape 7” Reel 16mm Tape 7” Reel Unit: mm W1 W2 max. 12.4+2.0/-0 18.4 12.4+2.0/-0 18.4 16.4+2.0/-0 22.4 16.4+2.0/-0 22.4 “T3” (3k/reel) 12mm Tape 7” Reel 12mm Tape 13” Reel 16mm Tape 13” Reel ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15 5101 Hidden Creek Ln Spicewood TX 78669 ABRACON IS Phone: 512-371-6159 | Fax: 512-351-8858 Ph. 949.546.8000 | Fax. 949.546.8001 ISO9001-2015 REVISED: 12.14.2018 LLC For terms and conditions of sales, please visit: Visit www.abracon.com for Terms and Conditions of Sale CERTIFIED www.abracon.com