ASVMX-25.000MHZ-5ABF-T

Ultra-Low Phase Jitter LVPECL SMD Clock Oscillator ASVMX-25.000MHz-5ABF Pb ESD Sensitive RoHS/RoHS II compliant Moisture Sensitivity Level – MSL 3 APPLICATIONS: • Communications • Backplane reference clock • SERDES reference clock • FPGA FEATURES: • 25MHz LVPECL • Typical phase noise: 100fs (Integration range: 1.875MHz-20MHz) • ±50ppm total frequency stability over -40°C to +85°C temperature range • Industry standard 6-Pin 7 x 5mm LGA package 7.0 x 5.0 x 1.4mm High Performance KEY ELECTRICAL SPECIFICATIONS Item Supply Voltage Storage Temp. Lead Temp.(soldering, 10s) ESD (HBM) Minimum -0.3 -55 Maximum +3.6 +125 +260 2 Unit V °C °C kV Condition VDD = 2.375 - 3.63V, TA = -40°C to +85°C, outputs terminated with 50 Ohms to VDD - 2.(1) Parameters Frequency Operating Temperature (TA) Overall Frequency Stability (2) Supply Voltage (VDD) Supply Current (IDD) VOH VOL Peak to Peak Output Swing (Vswing) Start-up Time Rise Time (Tr) Fall Time (Tf) Duty Cycle Integration Range: 12kHz to 20MHz Phase Noise Integration Range: 1.875MHz to 20MHz Output Logic Level Notes: 1. 2. Minimum Typical 25.000 -40 -50 +2.375 VDD-1.35 VDD-2.0 0.65 VDD-1.01 VDD-1.78 0.77 85 85 45 220 Maximum Units MHz +85 +50 +3.63 120 VDD-0.8 VDD-1.6 0.95 20 350 350 55 °C ppm V mA V V V ms ps % Notes Single ended RL=50Ω , CL=0pF 20% to 80% fsRMS 100 Guaranteed after thermal equilibrium Inclusive of initial accuracy, temperature drift, aging, shock, vibration from -40°C to +85°C. PART IDENTIFICATION ASVMX-25.000MHz -5ABF Packing Blank: Bulk or Tube T: Tape & Reel (1k/reel) ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.29.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Ultra-Low Phase Jitter LVPECL SMD Clock Oscillator ASVMX-25.000MHz-5ABF Pb DESCRIPTION: OUTLINE DIMENSION Ref. A A1 A2 D D1 E E1 b c e f k m n Min. 1.260 0.190 1.070 4.900 6.900 1.050 1.350 0.050 0.210 1.090 Nom. 1.330 0.230 1.100 5.000 3.700 BSC 7.000 5.080 BSC 1.100 1.400 2.540 BSC 0.100 0.260 1.140 36 Max. 1.400 0.270 1.130 5.100 RoHS/RoHS II compliant ASVMP 7.0 x 5.0 x 1.4mm Low Jitter High Performance Recommended Land Pattern Dimensional Tolerance aaa 0.100 bbb 0.070 7.100 1.150 1.450 0.150 0.310 1.190 Dimensions: mm ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.29.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Ultra-Low Phase Jitter LVPECL SMD Clock Oscillator ASVMX-25.000MHz-5ABF Pb RoHS/RoHS II compliant DESCRIPTION: PIN CONFIGURATION Pin # Pin Name Pin Type Pin Level 1 OE I, SE LVCMOS 2 3 4 5 6 DNC GND Q /Q VDD PWR O O PWR LVPECL LVPECL ASVMP 7.0 x 5.0 x 1.4mm Low Jitter High Performance Pin Function Output Enable, disables output to tri-state. 0 = Disabled, 1= Enabled, 50k Ω Pull-up Make no connection, leave floating Power Supply Ground Clock Output Complimentary Clock Output Power Supply REFLOW PROFILE Parameters Average Ramp-up Rate Pre-Heat Temp 150 – 200°C Temp > 217°C Time @ Peak Temperature Peak Temperature Ramp-down Rate Time 25°C to Peak Temp. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC Specifications 3°C /second max. 60 – 180 second 60 – 150 second 20 – 40 second 260°C + 0°C / -5°C -6°C / second max. 8 minutes max. 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.29.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Ultra-Low Phase Jitter LVPECL SMD Clock Oscillator ASVMX-25.000MHz-5ABF TAPE & REEL Pb ASVMP RoHS/RoHS II compliant DESCRIPTION: 7.0 x 5.0 x 1.4mm Low Jitter High Performance T= Tape & Reel, 1000pcs/reel. Reel Size = 7-inch Reel MSL-3 packaging applies to –T option. Blank = Bulk or Tube (43pcs/tube) MSL-3 packaging applies to MOQ=43 units (tube) 313.75 ~ 316.25 0.50±0.10 All sides 5.50±0.20 6.50 Ref. 1.80+0.20/-0.10 2.80 Ref. Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.29.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale