AWSCR-4.91CPLA-C30-T4

Miniature Ceramic Resonator 6.0 x 3.0 x 1.8 mm RoHS/RoHS II Compliant AWSCR-CPLA Pb in ceramic, exemption (7c-I) This product is not Moisture Sensitive - MSL = 1 Features Applications •• Industry standard footprint •• Low resonance impedance •• Built-in capacitance options •• Wide operating temperatures in extended industry range •• Metering systems •• Remote control •• Microprocessor •• Industrial control •• Electric appliances Electrical Specifications Parameters Min Frequency Range Typ. 1.84 Resonant Impedance (Ro) Max Units 12.00 100 50 MHz Ω 30 30 Standard Built-in Capacitance (C1=C2) Frequency Tolerance Frequnecy Stability Withstanding Voltage Voltage Rating Insulation Resistance (Ri) Operation Temperature Storage Temperature Aging Rate max (Fosc) * (1) D.C. Voltage (2) A.C. Voltage Other options: 10, 15, 22, 33, 39. 47 15 Other options: 10, 22, 30, 33, 39. 47 -0.5 0.5 -0.3 0.3 -0.2 0.2 100 6 15 500 -40 +85 -55 +85 -0.1 0.1 pF % % % V V Vp-p MΩ ºC ºC % Notes 1.84 MHz – 2.99 MHz 3.00 MHz – 3.49 MHz 3.50 MHz – 12.00 MHz 1.84 MHz – 8.00 MHz (Tol 1pF ± 20%) 8.01 MHz – 12.00 MHz (Tol 1pF ± 20%) 2.00-8.00 MHz 8.01-12.00 MHz DC, 5 s max 10V, 1 min. From Initial value * Components shall be left in a chamber of +85 ºC ± 2 ºC for 1000 hours, then measured after leaving in natural condition for 1 hours. 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 07-30-2021 ISO9001-2015 CERTIFIED Miniature Ceramic Resonator 6.0 x 3.0 x 1.8 mm RoHS/RoHS II Compliant AWSCR-CPLA Pb in ceramic, exemption (7c-I) This product is not Moisture Sensitive - MSL = 1 Options and Part Identification AWSCR . CPLA C  Frequency (MHz) Size (mm) Frequency Band Operating Temperature Built-in Cap Packaging 1.84 - 12.00 CP = 6.0 x 3.0 L = Lower Band A = -40 ºC to 85 ºC C = XXpF * T4 = 4000 pcs/reel * Please refer to Electrial Specifactions table Test Circuit and Conditions Parts shall be tested under the condition (Temp: 20 oC ± 15 oC, Humidity: 65 ± 20 % R.H.) unless the standard condition (Temp: 25 oC ± 3 oC, Humidity: 65 ± 10 % R.H.) is regulated to measure. VDD:+5V IC IC Output 1MΩ C1 C2 IC: 1/6TC4069UBP×2 C1,C2:30(1±20%)PF(1.84-8.00MHz) other(10/15/22/33/39/47pF) X 15(1±20%)PF(8.01-12.00MHz) other(10/22/30/33/39/47pF) 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 07-30-2021 ISO9001-2015 CERTIFIED Miniature Ceramic Resonator 6.0 x 3.0 x 1.8 mm RoHS/RoHS II Compliant AWSCR-CPLA Pb in ceramic, exemption (7c-I) This product is not Moisture Sensitive - MSL = 1 Dimensions T=1.8±0.2mm (1.84-3.5MHz) T=1.5±0.2mm(3.51-12.00MHz) Unit: mm 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 07-30-2021 ISO9001-2015 CERTIFIED Miniature Ceramic Resonator 6.0 x 3.0 x 1.8 mm RoHS/RoHS II Compliant AWSCR-CPLA Pb in ceramic, exemption (7c-I) This product is not Moisture Sensitive - MSL = 1 Recommended Land Pattern Unit: mm Recommended Reflow Profile 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 07-30-2021 ISO9001-2015 CERTIFIED Miniature Ceramic Resonator 6.0 x 3.0 x 1.8 mm RoHS/RoHS II Compliant AWSCR-CPLA Pb in ceramic, exemption (7c-I) This product is not Moisture Sensitive - MSL = 1 Packaging T4: 4000 pcs/reel Reel Dimension Unit: mm φA 330 ± 3 φB 80 min W 16.4 min T 22.4 max Pieces per reel 4000 typ. Carrier tape size 16 Packaging Sketch 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 07-30-2021 ISO9001-2015 CERTIFIED Miniature Ceramic Resonator 6.0 x 3.0 x 1.8 mm RoHS/RoHS II Compliant AWSCR-CPLA Pb in ceramic, exemption (7c-I) This product is not Moisture Sensitive - MSL = 1 Packaging Test Condition for Peel-Off Strength Top Tape 0g -7 trength 20 Peeling S 10 max Carrier Tape Caution 1. Do not apply excess mechanical stress to the component and terminals during soldering. Do not use this product if it is bent or damaged. 2. Do not clean or wash the component for it is not hermetically sealed. 3. Do not use a strong acidity flux with more than 0.2 wt% chlorine content during soldering. 4. Do not place or use the item close to fire. 5. Please ensure the component is thoroughly evaluated in your application circuit as the specification mentions the quality of the component as a single unit. 6. Expiry date (Shelf life) of the products is 12 months after the date of delivery under the conditions of a sealed and an unopened package. Please use the products within 12 months after delivery. If the item is stored for more than 12 months, use caution before use as the item may be degraded in the solderability or develop rust. Please confirm solderability and characteristics for the products regularly. ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 07-30-2021 ISO9001-2015 CERTIFIED