AWSZT-40.00CW-T

2.5 x 2.0mm INDUSTRIAL GRADE CERAMIC RESONATOR AWSZT-CW AWSZT-CW RoHS/RoHS II compliant Pb in ceramic, exemption (7c-I) 2.5 x 2.0 x 1.0 mm Moisture Sensitivity Level (MSL) – This product is not Moisture Sensitive - MSL = 1 FEATURES: APPLICATIONS: • Remote controls, Microprocessor clocks, Mobile phones, DVD & CD-Roms, Electric appliances • Consumer electronics • Low resonant impedance • Built-in load capacitors • IR reflow capable ELECTRICAL CHARACTERISTICS: Parameters Frequency Range Minimum 20.00 Typical Resonant Impedance (Ro) 10 – 20% 5 – 20% 5 – 20% Load Capacitance for Test Circuit (C1=C2) Frequency Tolerance @25 ºC Frequency Stability @ -25ºC to +85ºC -0.5 -0.2 Withstanding Voltage (1) D.C.Voltage Rating Voltage (2) A.C. Voltage Insulation Resistance Operation Temperature Storage Temperature Aging Rate (Fosc) (10 years) 10 5 5 50 500 -25 -55 -0.2 Maximum 60.00 60 50 50 10 + 20% 5 + 20% 5 + 20% Units MHz 0.5 0.2 % % V 6 15 V Vp-p. 85 85 0.2 Ω pF MΩ ºC ºC % Notes 20.00 MHz – 25.99 MHz 26.00 MHz – 35.00 MHz 35.01 MHz – 60.00 MHz 20.00 MHz – 25.99 MHz 26.00 MHz – 35.00 MHz 35.01 MHz – 60.00 MHz DC , 1 min 10V, 1min OPTIONS & PART IDENTIFICATION: AWSZT – XX.XX CW Frequency Frequency in MHz Packaging T: 3000pcs/Reel Blank: Bulk TEST CONDITION AND TEST CIRCUIT: Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp: 25±3°C, Humidity: 65±10% R.H.) is regulated to measure X: C e ra mic Re s onat or C1=C2: 10pF ±20% ( 20.00MHz~25.99MHz) 5pF ±20% ( 26.00MHz~35.00MHz) 5pF ±20% ( 35.01MHz~60.00MHz) ABRACON IS ISO9001:2008 CERTIFIED Revised: 08.12.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com $:6=7&:6HULHV AWSZT-CW Series ;PP,1'8675,$/*5$'( 2.5X2.0mm INDUSTRIAL GRADE  &(5$0,&5(621$725 CERAMIC RESONATOR  WK 'DWHRI,VVXH$XJXVW  [[PP st RoHS/RoHS II compliant Date of Issue: Aug.1 , 2012 2.5 x 2.0 x 1.0mm 5HYLVLRQ( Page (6) of (12) $EUDFRQ'UDZLQJ Pb in ceramic, exemption (7c-I) Revision #: C Abracon Drawing # 452749  Page (6) of (12)  2XWOLQH'LPHQVLRQV OUTLINE DRAWING: 5.0 Outline Dimensions    PD[                   Recommended Land Pattern  5HFRPPHQGHG/DQG3DWWHUQ 5.1  Recommended Land Pattern   2.5 x 2.0mm INDUSTRIAL GRADE CERAMIC RESONATOR AWSZT-CW AWSZT-CW 2.5 x 2.0 x 1.0 mm Dimension: mm REFLOW PROFILE:   'LPHQVLRQPP Dimension: mm    ABRACON IS ISO9001:2008 CERTIFIED Revised: 08.12.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 2.5 x 2.0mm INDUSTRIAL GRADE CERAMIC RESONATOR AWSZT-CW RoHS/RoHS II compliant Pb in ceramic, exemption (7c-I) AWSZT-CW 2.5 x 2.0 x 1.0 mm TAPE & REEL: T: tape and reel (3,000pcs/reel) ФA 180±3 ФB 60 min. W 8.4 min T 12.4 max Carrier tape size 8 Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the product will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according to MSL 1 requirements to maintain solderability. Dimension: mm CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than Six Months after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other highreliability, life dependant applications. Contact Abracon Corporation prior to using this product when in doubt. ABRACON IS ISO9001:2008 CERTIFIED Revised: 08.12.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com