7.4 x 3.4 x 1.8 mm SMD CERAMIC RESONATOR
AWSZT-MGD
FEATURES: • Low resonant impedance • 240°C peak reflow capable • Low cost
Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7))
RoHS
Compliant
7.4 x 3.4 x 1.8 mm
|||||||||||||||
APPLICATIONS: • Remote controls, Microprocessor clocks, Mobile phones, DVD & CD-Roms, Electric appliances, Industrial controllers • Consumer electronics
ELECTRICAL CHARACTERISTICS:
Item Frequency Range Resonant Impedance Frequency T olerance Frequency Stability Withstanding Voltage Rating Voltage (1) D.C.Voltage (2) A.C. Voltage Load Capacitance Insulation Resistance Operation T emperature Storage Temperature Aging Rate (Fosc) Requirement 1.84MHz to 8.00MHz See Table 2.1 ± 0.5% ±0.3% max. (-25ºC to +85ºC) 50V (DC , 1 min) 6 V.D.C. max 15 Vp-p. max 30pF ±20% (C1=C2) 100M min. (10V, 1min) -25ºC to +85ºC o o -55 C to +85 C ±0.3% max. (10 years)
T able 2.1 Frequency Range (MHz) 1.84 MHz - 2.99 MHz 3.00 MHz - 3.49 MHz 3.50 MHz - 8.00 MHz Resonant Impedance (Ro)(Ω ) 100 max 50 max 30 max
TEST CONDITION AND TEST CIRCUIT:
X: Ceramic Resonator C1=C2=30pF±20%
Parts shall be measured under a condition (T emp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (T emp: 25±3°C, Humidity: 65±10% R.H.) is regulated to measure
OPTIONS & PART IDENTIFICATION:
AWSZT - X.XXMGD Frequency Frequency in MHz Packaging T f or Tape and Reel
ABRACON IS ABRACON ISO 9001 / QS 9000 CERTIFIED
Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.23.08 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
7.4 x 3.4 x 1.8 mm SMD CERAMIC RESONATOR
AWSZT-MGD
OUTLINE DRAWING:
1. 2± 0. 3 1.2± 0.3
Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7))
RoHS
Compliant
7.4 x 3.4 x 1.8 mm
|||||||||||||||
RECOMMENDED LAND PATT ERN
5.0 ± 0. 3
5.0±0. 3 7.4±0. 3
4.00 M
Dimension: mm
3.4±0.3
1.7 ± 0. 3
INPU T OUTPU T
TAPE & REEL: (4,000pcs/reel)
Blank Pocket 10 Pitches
4.0±0.3
Loaded Pocket Blank Pocket 10 Pitches Leader 200mm Max
1.8±0.3
Top Tape
- 70g trength 20 Peeling S
10 max
A 330±3 B W T Pieces per reel Carrier tape size 4000typ. 16
Carrier Tape
80min 16.4min 22.4max
Dimension: mm
CAUTION
• Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. • This component is not hermetically sealed. Do not clean or wash the component. • Reflow Soldering: Do not use strong acidity flux,such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. • Do not expose the component to open flame. • This specification applies to the functionality of the component as a single unit. The customer is advised to insure that the component is thoroughly evaluated in the application circuit. • Shelf Life: The warranted Shelf Life of this product is Six Months after the Delivery Date under the conditions of sealed, unopened, original packaging. • Storage Conditions: If the product is to be stored for a period greater than Six Months after the Delivery Date, it is recommended that the customer confirm the solderability and characteristics for the product prior to use. • This product is not recommended for use in industrial related Automotive, Medical, Safety, Military, or other high-reliability life dependant applications. Contact Abracon Corporation prior to using this product when in doubt.
ABRACON IS ABRACON ISO 9001 / QS 9000 CERTIFIED
Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.23.08 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
很抱歉,暂时无法提供与“AWSZT-MGD”相匹配的价格&库存,您可以联系我们找货
免费人工找货