HWZT-10.00RS

Engineering/Process Change Notice ECN/PCN No.: 3521 For Manufacturer Product Description: Thru-Hole Abracon Part Number / Part Series: HWZT-RS Affected Revision: F New Revision: EOL Application: ☒ Series ☐ Part Number ☐ Safety ☒ Non-Safety Prior to Change: https://abracon.com/Resonators/HWZT_RS.pdf After Change: EOL Cause/Reason for Change: Production will be discontinued Change Plan Effective Date: Immediate Additional Remarks: Change Declaration: Issued Date: Issued By: 4/22/20 Stephanie Lopez Approval: Thomas Culhane Engineering Director Approval: Reuben Quintanilla Quality Director Issued Department: Engineering Approval: Ying Huang Purchasing Director For Abracon EOL only Last Time Buy (if applicable): 9/15/2020 Additional Approval: Alternate Part Number / Part Series: None Additional Approval: Additional Approval: Customer Approval (If Applicable) Qualification Status: ☐ Approved ☐ Not accepted Note: It is considered approved if there is no feedback from the customer 1 month after ECN/PCN is released. Customer Part Number: Company Name: Customer Project: Company Representative: Customer Remarks: Form #7020 Rev. D Effective: 02/11/2020 Page 1 of 1 Representative Signature: HWZT-RS LOW PROFILE LEADED CERAMIC RESONATOR HWZT-RS RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) FEATURES: APPLICATIONS: • Low resonant impedance • Small size, Light weight. • Low cost timing solution . • Clock oscillation for microcontrollers • Telephones • Household electric appliances 5.5 x 3.0 x 5.0mm | | | | | | | | | | | | | | STANDARD SPECIFICATIONS: Minimum 8.00 Typical -0.5 -0.3 Maximum 12.50 25 +0.5 +0.3 100 6 15 36 Units MHz Ω % % Vdc Vdc Vp-p. pF MΩ ºC ºC % Notes -25ºC to +85ºC 5 secs L Parameters Frequency Range Resonant Impedance (Ro) Frequency Tolerance Frequency Stability Withstanding Voltage D.C. Voltage Rating Voltage A.C. Voltage Load Capacitance Insulation Resistance Operation Temperature Storage Temperature Aging Rate (Fosc) 24 500 -25 -40 -0.3 30 From initial value EO +85 +85 0.3 10Vdc, 1min TEST CONDITION AND TEST CIRCUIT: Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp: 25±3°C, Humidity: 65±10% R.H.) is regulated to measure X: Ceramic Resonator C1=C2=30pF±20% OPTIONS & PART IDENTIFICATION: HWZT - RS - Packaging Frequency Blank: Bulk A: AMMO package* *AMMO package lead length 13.5mm Frequency in MHz LLC 5101 Hidden Creek Lane Spicewood Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sale please visit: www.abracon.com REVISED: 03.01.2017 ABRACON IS ISO9001-2008 CERTIFIED | LOW PROFILE LEADED CERAMIC RESONATOR HWZT-RS RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) HWZT-RS 5.5 x 3.0 x 5.0mm | | | | | | | | | | | | | | OUTLINE DRAWING: Bulk Pack EO L AMMO Pack Dimension: mm Packaging: Bulk: 500pcs/plastic bag AMMO: 2000pcs/box Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the product will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according to MSL 1 requirements to maintain solderability. CAUTION (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other highreliability , life dependant applications. ContactAbracon Corporation prior to using this product when in doubt. ATTENTION: Abracon LLC products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon is required. Please contact Abracon for more information. LLC 5101 Hidden Creek Lane Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sale please visit: www.abracon.com REVISED: 03.01.2017 ABRACON IS ISO9001-2008 CERTIFIED |