Engineering/Process Change Notice
ECN/PCN No.: 3520
For Manufacturer
Product Description:
Thru-Hole; ceramic resonator
Abracon Part Number / Part Series:
HWZT-MD
Affected Revision:
F
New Revision:
EOL
Application:
☒ Series
☐ Part Number
☐ Safety
☒ Non-Safety
Prior to Change:
https://abracon.com/Resonators/HWZT_MD.pdf
After Change:
EOL
Cause/Reason for Change:
Production will be discontinued
Change Plan
Effective Date:
Immediate
Additional Remarks:
Change Declaration:
Issued Date:
Issued By:
4/22/20
Stephanie Lopez
Approval:
Thomas Culhane
Engineering Director
Approval:
Reuben Quintanilla
Quality Director
Issued Department:
Engineering
Approval:
Ying Huang
Purchasing Director
For Abracon EOL only
Last Time Buy (if applicable):
9/15/2020
Additional Approval:
Alternate Part Number / Part Series:
None
Additional Approval:
Additional Approval:
Customer Approval (If Applicable)
Qualification Status:
☐ Approved ☐ Not accepted
Note: It is considered approved if there is no feedback from the customer 1 month after ECN/PCN is released.
Customer Part Number:
Company Name:
Customer Project:
Company Representative:
Customer Remarks:
Form #7020
Rev. D
Effective: 02/11/2020
Page 1 of 1
Representative Signature:
LEADED CERAMIC RESONATOR
HWZT-MD
RoHS/RoHS II Compliant
Pb in ceramic, exemption (7c-I)
FEATURES:
• Low resonant impedance
• Small size, Light weight.
• Low cost timing solution
Siz e Varies
| | | | | | | | | | | | | |
APPLICATIONS:
• Clock oscillation for microcontrollers
• Telephones
• Household electric appliances
STANDARD SPECIFICATIONS:
Parameters
Minimum
2.00
12.51
Frequency Range
Typical
Units
Notes
MHz
Ω
2.00 MHz ~ 2.99 MHz
3.00 MHz ~ 6.00 MHz
12.51 MHz ~ 60.00 MHz
2.00 MHz ~ 6.00 MHz
12.51 MHz ~ 20.00 MHz
20.01 MHz ~ 25.99 MHz
26.00 MHz ~ 60.00 MHz
L
Resonant Impedance (Ro)
Maximum
6.00
60.00
80
30
30
36
36
18
6
+0.5
+0.3
50
6
15
Standard Load Capacitance for
test circuit (C1=C2)
30
30
15
5
pF
%
%
Vdc
Vdc
Vp-p.
MΩ
ºC
ºC
%
EO
Frequency Tolerance
Frequency Stability
Withstanding Voltage
D.C. Voltage
Rating Voltage
A.C. Voltage
Insulation Resistance
Operation Temperature
Storage Temperature
Aging Rate (Fosc)
24
24
12
4
-0.5
-0.3
100
-25
-55
-0.3
TEST CONDITION AND TEST CIRCUIT:
+85
+85
0.3
Frequency
Frequency in MHz
Parts shall be measured under a condition (Temp.:
20±15°C, Humidity: 65±20% R.H.) unless the standard
condition (Temp: 25±2°C, Humidity: 65±5% R.H.) is
regulated to measure
ABRACON IS
ISO9001:2008
CERTIFIED
10Vdc, 1min
From initial value
OPTIONS & PART IDENTIFICATION:
HWZT -
X: Ceramic Resonator
-25ºC to +85ºC
DC , 1 min
MD Packaging
Blank: Bulk
A: AMMO package*
*AMMO package
lead length 13.5mm
Revised: 05.07.13
Visit www.abracon.com for Terms & Conditions of Sale
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
|
LEADED CERAMIC RESONATOR
HWZT-MD
RoHS/RoHS II Compliant
Pb in ceramic, exemption (7c-I)
OUTLINE DRAWING:
Siz e Varies
| | | | | | | | | | | | | |
Freq. Range: 2.00 ~ 6.00MHz (Low Profile)
Bulk:
L
AMMO:
Freq. Range: 12.51 ~ 60.00MHz
Bulk:
10.0max
5.0max
AMMO:
5.0±1.0
H
**
EO
0.5±0.1
5.0±0.30
H :*:EIAJ
12.51 ~ 23.99MHz,
10.0mm max
MONTHLY CODE
24.00 ~ 31.99MHz, 7.5mm max
32.00 ~ 60.00MHz, 6.5mm max
0.25±0.1
Dimension: mm
Packaging:
Bulk: 500pcs/plastic bag
AMMO: 2000pcs/box
Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the product will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according
to MSL 1 requirements to maintain solderability.
CAUTION
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as
this will cause damage to the component.
(2) This component is not hermetically sealed. Do not clean or wash the component.
(3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering.
(4) Do not expose the component to open flame.
(5) This specification applies to the functionality of the component as a single unit.
(6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that
customers confirm the solderability and characteristics for the product prior to use.
(7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other highreliability
, life dependant applications. ContactAbracon Corporation prior to using this product when in doubt.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CERTIFIED
Revised: 05.07.13
Visit www.abracon.com for Terms & Conditions of Sale
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
|
很抱歉,暂时无法提供与“HWZT-12.00MD”相匹配的价格&库存,您可以联系我们找货
免费人工找货