ACI-A038040-1855

ACI-A038040-1855 397 Route 281 P.O. Box 1175 Tully, New York 13159-1175 Phone: 315 696-6676 Fax: 315 696 9923 Email: sales@acipower.com www.acipower.com PRODUCT DATA SHEET 05/15/09 I-LITE, 8.0 WATT LED DRIVER (Common-Cathode, One to Six Channels) B D C GENERAL DESCRIPTION The ACI-A038040-1855 is designed to drive up to 6 parallel channels of series connected LEDs. The number of channels and current per channel are configurable per Table 1 on Page 3, by setting a fourposition switch located on the driver, enabling the driver to support a wide range of displays. Operating as a true constant current source, the driver provides a complete integrated solution that operates from a nominal +12V source. 0.120 IN HOLE (X2) 0.150 IN PAD (X2) A CON3 CON2 2.00 IN Additional Support Documentation: 1. I-LITE LED DRIVER APPLICATION NOTE 2. DRIVING OPTREX PANELS WITH ACI-A038040-1855 0.950 IN Weight = 7.2 grams Altitude = 35,000 ft max. Humidity < 95% non-condensing Size (L x W x H) = 2.0 IN x 0.95 IN x 0.285 IN PCB thickness = 0.062 IN Mounting Holes = 0.120 IN diameter (X2) Input Power & Control Connector = CON1 LED Output Connectors = CON2 and CON3 RoHS Compliant INPUT CONNECTOR CON1 MOLEX 53261-0571 PIN # 1 2 3 4 5 FUNCTION OUTPUT CONNECTORS CON2 AND CON3 JST SM06B-SHLS-TF PIN # 1 2 3 4 5 6 FUNCTION LED ANODE #1 LED ANODE #2 LED ANODE #3 LED CATHODE (COMMON) LED CATHODE (COMMON) LED CATHODE (COMMON) +VIN(PWR) GND(PWR) ENABLE (IN) INTENSITY CNTL (IN) +3.3VREF (OUT) 0.100 IN Page 1 of 4 0.285 IN MECHANICAL/ENVIRONMENTAL CON1 1.80 IN D C This unit features enable and intensity control inputs. 4 POSITION MAX INTENSITY SELECT SWITCH (S1) A B 0.100 IN 0.062 IN (PCB) 0.750 IN ACI-A038040-1855 397 Route 281 P.O. Box 1175 Tully, New York 13159-1175 Phone: 315 696-6676 Fax: 315 696 9923 Email: sales@acipower.com www.acipower.com PRODUCT DATA SHEET 05/15/09 MAXIMUM RATINGS* Symbol Vin Vip Iop Pin Top Tstg *Maximum Parameter Value Supply Voltage (Referenced to Ground) -0.3 to 19 Voltage applied to any Input Pin (Referenced to Ground) -0.3 to 3.6 Current sourced or sinked from any Output Control Pin +/- 10 Input Power (DC Input Voltage x DC Input Current) 10.1 Operating Temperature (Still air ambient around Driver) -30 to +85 Storage Temperature -40 to +105 Ratings are those values beyond which damage to the LED driver may occur Unit Vdc Vdc mAdc W °C °C RECOMMENDED OPERATING CONDITIONS Symbol Vin Vf Icntl **Vin must Parameter Supply Voltage (Referenced to Ground) Series Connected Cumulative LED Forward-Drop Voltage LED Intensity Control Voltage be less than the minimum Forward-Drop Voltage (Vf). Min 8.0 **Vin + 1 0.25 Max 18.0 38 3.0 Unit Vdc Vdc Vdc ELECTRICAL CHARACTERISTICS Vin = +12V, Icntl = +3.0V, Enable = +3.0V, unless Symbol Parameter OCV Open Circuit Voltage ENoff Enable Control, Unit Off ENon Enable Control, Unit ON +3.3Vref +3.3V Output Reference Voltage Iadj Nominal output current adjust range Iind Input Current Draw (Disabled) Eff Electrical Efficiency Note1: Maximum current per configuration selected (refer to Table 1 on Page 3) Electrical Characteristics continued on Page 3. otherwise specified Test Conditions No Load Enable (Pin 3) Enable (Pin 3) 1K Ohm Load to Ground (Pin 5) Icntl (Pin4) = +0.25V to 3.0V Enable (Pin 3) = 0V Min 45 1.8 3.13 0 Nom 50 Max 55 0.4 3.47 Note1 3.3 Unit Vdc Vdc Vdc Vdc 0.001 90 0.06 Adc % Page 2 of 4 ACI-A038040-1855 397 Route 281 P.O. Box 1175 Tully, New York 13159-1175 Phone: 315 696-6676 Fax: 315 696 9923 Email: sales@acipower.com www.acipower.com PRODUCT DATA SHEET 05/15/09 ELECTRICAL CHARACTERISTICS (for popular configurations) Vin = +12V, Icntl = +3.0V, Enable = +3.0V, unless otherwise specified Symbol Parameter Test Conditions Iout Output Current per channel Number of LED Channels Driven Vf = 32.8V Iin Input Current Draw S1 = A Iout Output Current per channel Number of LED Channels Driven Vf = 23.7V Iin Input Current Draw S1 = B Number of LED Channels Driven Iout Output Current per channel Vf = 38V Iin Input Current Draw S1 = C Number of LED Channels Driven Iout Output Current per channel Vf = 13.2V Iin Input Current Draw S1 = B Number of LED Channels Driven Iout Output Current per channel Vf = 32V Iin Input Current Draw S1 = C =2 Min 114 0.69 85.5 0.38 66.5 0.47 57 0.21 33.3 0.39 Nom 120 0.73 90 0.40 70 0.49 60 0.22 35 0.42 Max 126 0.77 94.5 0.42 73.5 0.52 63 0.23 36.8 0.44 Unit mAdc Adc mAdc Adc mAdc Adc mAdc Adc mAdc Adc =2 =2 =3 =4 Possible Configurations Switch Setting (S1) Number of LED Channels Driven A B C D TABLE1. 1 2 3 4 Iout/ch Vf max Iout/ch Vf max Iout/ch Vf max Iout/ch (mA) (V) (mA) (V) (mA) (V) (mA) 240 33 120 33 80 33 60 180 38 90 38 60 38 45 140 38 70 38 46.7 38 35 Switch Setting D has been reserved for future configurations. Output Current per Channel, based on Switch (S1) Setting and Number of Vf max (V) 33 38 38 5 Iout/ch (mA) 48 36 28 Vf max (V) 33 38 38 6 Iout/ch (mA) 40 30 23.3 Vf max (V) 33 38 38 Channels Driven Caution: When selecting the number of channels to be driven and current per channel from one of the configurations in Table 1 above, you must ensure that the Forward-Drop Voltage (Vf) in your application does not exceed the Vf max value specified in Table 1. The Nominal Input Current Draw, based on Vin, can be calculated from the following equation: Nominal Input Current Draw (A) = Iout per Channel (mA) X Number of Channels X Vf (V) X 0.0011 Vin (V) Page 3 of 4 ACI-A038040-1855 397 Route 281 P.O. Box 1175 Tully, New York 13159-1175 Phone: 315 696-6676 Fax: 315 696 9923 Email: sales@acipower.com www.acipower.com PRODUCT DATA SHEET 05/15/09 LED Intensity vs. Icntl voltage 100% 80% 60% 40% 20% 0% 0.0 LED Intensity 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Icntl (volts) Page 4 of 4