ACI-E060440-1970

ACI-E060440-1970 397 Route 281 P.O. Box 1175 Tully, New York 13159-1175 Phone: 315 696-6676 Fax: 315 696 9923 Email: sales@acipower.com www.acipower.com PRODUCT DATA SHEET 01/03/11 I-DRIVE 5, 26.4 WATT LED DRIVER (Single Channel 60V, 0-440mA) GENERAL DESCRIPTION The ACI-E060440-1970 represents the 5th generation of IDrive technology used for powering LED backlights. Operating as a true constant current source and capable of driving up to 20 LEDs in series. This driver provides a complete integrated solution that is regulated over an input voltage range of +19.2V to +28.8V. Simple to connect and operate, this driver solution is capable of providing precise control to support dimming applications with a minimum of 3000:1. This unit features enable and intensity control inputs. This unit is RoHS Compliant. 0.15 IN (X2) 3.25 IN 2.95 IN 0.128 IN DIA HOLE (X2) 0.062 IN (PCB) CON2 0.15 IN (X2) CON1 1.70 IN 2.00 IN 0.385 IN MECHANICAL/ENVIRONMENTAL Weight = 33.2 grams Altitude = 35,000 ft max. Humidity < 95% non-condensing Size (L x W x H) = 3.25 IN x 2.00 IN x 0.385 IN PCB thickness = 0.062 IN Mounting Holes = 0.128 IN diameter (X2) Input Power & Control Connector = CON1 LED Output Connector = CON2 INPUT CONNECTOR CON1 MOLEX 53261-1471 PIN# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 FUNCTION +19.2 to +28.8V (PWR) +19.2 to +28.8V (PWR) +19.2 to +28.8V (PWR) +19.2 to +28.8V (PWR) GND (PWR) GND (PWR) GND (PWR) GND (PWR) ENABLE ICNTL TBD TBD +5VDC REF OUT GND (SIGNAL) OUTPUT CONNECTOR CON2 MOLEX 53261-0571 PIN# 1 2 3 4 5 FUNCTION + LED (ANODE 1) + LED (ANODE 2) NC - LED (CATHODE 1) - LED (CATHODE 2) Page 1 of 3 ACI-E060440-1970 397 Route 281 P.O. Box 1175 Tully, New York 13159-1175 Phone: 315 696-6676 Fax: 315 696 9923 Email: sales@acipower.com www.acipower.com PRODUCT DATA SHEET 01/03/11 MAXIMUM RATINGS* Symbol Vin Vip Iop Pin Top Tstg Parameter Supply Voltage (Referenced to Ground) Voltage applied to any Input Pin (Referenced to Ground) Current sourced or sinked from any Output Control Pin Input Power (DC Input Voltage x DC Input Current) Operating Temperature (Still air ambient around Driver) Storage Temperature Value -0.7 to 32 -0.7 to 5.7 +/- 10 34 -30 to +85 -40 to +105 Unit Vdc Vdc mAdc W °C °C *Maximum Ratings are those values beyond which damage to the driver may occur. RECOMMENDED OPERATING CONDITIONS Symbol Vin Vf Icntl Parameter Supply Voltage (Referenced to Ground) Series Connected Cumulative LED Forward-Drop Voltage LED Intensity Control Voltage Min 19.2 30 0.5 Max 28.8 56 4.5 Unit Vdc Vdc Vdc ELECTRICAL CHARACTERISTICS Vin = +24V, Vf = 49.5Vdc, Icntl = +4.5V, Enable = +5V, unless otherwise specified. Symbol Parameter Test Conditions Min OCV Open Circuit Voltage No Load 66.5 Iout Output Current 418 Icntl Nominal Output Current Adjust Range Icntl (Pin 10)= 0 +0.5V to +4.5V ENoff Enable Control, Unit Off ENon Enable Control, Unit ON 2.0 +5Vref +5V Output Reference Voltage 1K Ohm Load to 4.75 Ground (Pin 13) Iin Input Current Draw Iind Input Current Draw (Disabled) Enable (Pin 9) = 0V Eff Electrical Efficiency 89 Nom 70 440 Max 73.5 462 440 0.5 Unit Vdc mAdc mAdc Vdc Vdc Vdc Adc Adc % 5.0 1.0 5.25 0.06 Page 2 of 3 ACI-E060440-1970 397 Route 281 P.O. Box 1175 Tully, New York 13159-1175 Phone: 315 696-6676 Fax: 315 696 9923 Email: sales@acipower.com www.acipower.com PRODUCT DATA SHEET 01/03/11 LED Intensity vs Icntl 100 90 LED Intensity, % 80 70 60 50 40 30 20 10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Icntrl, Volts Page 3 of 3