ACT9200

Tel : Fax : email : +44 118 979 1238 +44 118 979 1283 info@actcrystals.com ACT9200 The ACT9200 family is a miniature, low profile SMD package, with a ceramic base utilising a seam welded metal lid for high reliability and better long-term stability. The metal lid is grounded through the package to assist with EMI emission reductions. This 7x5mm device is available as the ACT9200 in both 3V3 and 5V0. 1V8 and 2V5 versions are available as ACT9200L (See ACT9200L data sheet). A 32.768kHz version is available as the 9200WC (See 9200WC data sheet). Taped and reeled packaging (1k reels) and loose quantities are available for purchase, to suit high and low volume production. Specification Parameter Supply Voltage Frequency Range Frequency Stability Temp Operating Range Temp Storage Range Symb. Vdd fo Δf/fo Topr Tstg Specification 3.3VDC ± 10% 1.000 ~ 200.00 MHz ±15ppm ~ ±100ppm 0 ~ +70°Cstandard to -40 ~ +85°C -55 to +125°C 5.0VDC ±10% 1.000 ~ 106.25 MHz Condition Please specify Please specify Please specify Please specify 16mA (1.000 ~ 34.999 MHz) Supply Current (max) Iop 25mA (35.000 ~ 60.00 MHz) 40mA (60.001 ~ 99.999 MHz) 50mA (100.00 ~ 155.00 MHz) 60mA (155.01 ~ 200.00 MHz) Duty Cycle Output Level ‘0’ Output Level ‘1’ Rise & Fall Time (max) Output Load Start-up Time Tri-state Input Voltage Ageing Period Jitter (Absolute) Period Jitter (one sigma) Fa Tj Tj Tw/t VOL VOH TrTf N/CL Tosc No Connection VIH : ≥90% of VDD VIL : ≤10% of VDD ±5ppm 25mA (1.0000 ~ 34.999 MHz) 40mA (35.00 ~ 60.00 MHz) 60mA (60.001 ~ 99.999 MHz) 80mA (100.00 ~ 106.25 MHz) Please specify 40/60% (Std) & 45/55% available 0.4VDC max (TTL) 2.4VDC min (TTL) 10nS (1.000 ~ 34.999 MHz) 5nS (35.00 ~ 99.999 MHz) 2.5nS (100.00 ~200.00 MHz) 10mS max Enable output Enable output Disable output : High Impedance ±3ppm option 10% VDD max (HCMOS) 90% VDD min (HCMOS) 10nS (1.00 ~ 49.999 MHz) 5nS (50.00MHz ~ 99.90 MHz) 3nS (100.00 ~ 106.25 MHz) 10TTL / 15pF (30pF available) first year max @25°C Other frequencies - see Note 2 below Other frequencies - see Note 2 below 100pS max @ 1.0MHz 25pS max @ 1.0MHz Pad surface Material Au APPLICATIONS - Microprocessor clock - PDA / notebook - Wireless applications - Audio - Gigabit ethernet - Fibre channel - Instrumentation NOTE1: To reduce HF power supply noise, an external bypass capacitor of 0.01µF close to ground and Vdd is recommended. NOTE 2: Typical (max) Jitter values in pS: RMS(1 sigma) Absolute (Pk-Pk) 25MHz: 6.3 (10) 17.8 (28) 33MHZ: 5.2 (10) 14.7 (28) 60MHz: 3.7 (5.0) 10.5 (14.0) 100MHz 1.0 (3.0) 2.8 (8.4) Please note that all parameters can not necessarily be specified in the same device Customer to Specify : Frequency, Frequency Stability, Operating Temperature Range, Output Type, Output enable, Voltage, Duty Cycle In line with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 1 of 3 Issue: 8 SKr Date: 2/11/05 Tel : Fax : email : +44 118 979 1238 +44 118 979 1283 info@actcrystals.com ACT9200 CIRCUIT DRAWINGS 260 In line with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 2 of 3 Issue: 8 SKr Date: 2/11/05 Tel : Fax : email : +44 118 979 1238 +44 118 979 1283 info@actcrystals.com ACT9200 TAPE & REEL SPECIFICATIONS (1K Reels ) 4.1.0 ±0.1 2.1.0 ±0.05 7.5 ±0.1 1.75 Ø1 .5 ±0.1 B B 16 ±0.3 Ø 2.2 ±0.1 A A 8.2.0 ±0.1 3° max 5.4 ±0.1 3.1° max 0.3 ±0.05 7.4 ±0.1 0.3 ±0.05 1.7 ±0.1 1.7 ±0.1 Section A-A Section B-B Dimensions in mm 40° 21.5 ±1.0 2.0 ±0.2 Ø 80 ±0.5 Ø 68 ±0.5 178 ±2.0 or 330 ±2.0 2.1.0 ±0.5 Detail Ø 13 ± 0.5 Ø 23 ±0.5 SK 4 29/3/04 In line with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 3 of 3 Issue: 7 SKr Date: 2/11/05