ACTF4003

Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com The ACTF4003/433.92/QCC8C is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter in a surface-mount ceramic QCC8C case, designed to provide front-end selectivity in 433.920 MHz receivers. Receiver designs using this filter include superhet with 10.7 MHz or 500 kHz IF, direct conversion and superregen. 1.Package Dimension (QCC8C) 2. Pin 1 2 5 6 3, 7 4,8 Sign A B C D Data (unit: mm) 2.08 0.60 1.27 2.54 Connection Input Ground Input Output Output Ground to be Grounded Case Ground Sign E F G H Data(unit:mm) 1.20 1.35 5.00 5.00 3. Test Circuit In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 1 OF 3 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 4.Typical Frequency Response 5.Performance 5-1.Maximum Ratings Rating Input Power Level DC Voltage Operating Temperature Storage Temperature Soldering Temperature Value 10 0 -45 to +120 -45 to +120 +235 Units dBm VDC °C °C °C In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 2 OF 3 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 5-2.Electronic Characteristics Reference temperature: Characteristic Centre Frequency (Centre frequency between 3dB points) Minimum insertion Loss 433.80 …. 434.12 MHz 3dB Pass bandwidth (relative to ILmin) Pass band (relative to ILmin) 433.76 …. 434.08 MHz 433.74 …. 434.10 MHz 433.68 …. 434.16 MHz Relative attenuation (relative to ILmin) 10.00 …. 414.00 MHz 414.00 …. 428.00 MHz 428.00 …. 432.84 MHz 434.92 …. 442.00 MHz 442.00 …. 550.00 MHz 550.00….1000.00 MHz fC ILmin BW3 -670 ---45 35 15 10 35 45 TA = -45 …. +95 °C Minimum Typical 433.920 2.0 730 1.0 1.0 1.5 50 40 20 15 40 50 4.0 790 2.0 3.0 6.0 ------Maximum Units MHz dB kHz dB dB dB dB dB dB dB dB dB iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. The frequency f C is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 3. 4. 5. 6. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 3 OF 3