ACTF4014

Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com The ACTF4014/480.0/QCC8C is an IF filter for DBS receivers with constant group delay. The device is housed in a QCC8C package. Centre frequency ; 480.0MHz. 1.Package Dimension (QCC8C) 2. Pin 2 1 6 5 3, 7 4,8 Sign A B C D Data (unit: mm) 2.08 0.60 1.27 2.54 Connection Input Input Ground Output Output Ground To be Grounded Case Ground Sign E F G H Data (unit: mm) 1.20 1.35 5.00 5.00 3.Equivalent LC Model In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 4.Typical Frequency Response 5.Performance 5-1.Maximum Ratings Rating AC Voltage Between Any Two Pins DC Voltage Between Any Two Pins Storage temperature range Operable temperature range Vpp VDC Tstg TA Value 5 0 -40 to +85 -25 to +85 Unit V V °C °C In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 5-2.Electronic Characteristics Reference temperature: TA = 25 °C ZS = 50 Ω Terminating source impedance: Terminating load impedance: ZL = 50 Ω Group delay aperture: 0.25MHz Characteristic Centre Frequency Insertion attenuation 480.00 MHz (Reference level for the following data) Pass bandwidth Relative attenuation 466.50 MHz 493.50 MHz 430.00 ….455.50 MHz 504.50 … 530.00 MHz αrel≤3dB fC α B3dB αrel --40.0 38.0 40.0 Δα --Δτ TCf --3.0 3.2 46.0 43.0 46.0 0.6 227.5 8.5 -86 4.6 4.6 ---1.0 -15 -dB dB dB dB dB dB ns ns ppm/K Min. 479.00 -25.6 Typical 480.00 22.5 26.6 Max. 481.00 24 27.6 Unit MHz dB MHz Lower sidelobe Upper sidelobe Reflected wave signal suppression 0.15μs … 2.0μs after main pulse Amplitude ripple (p-p) Group delay Group delay ripple (p-p) 473.50 … 486.50 MHz 480.00 MHz 467.00 … 493.00 MHz τ Temperature coefficient of frequency iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. The frequency f C is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 3. 4. 5. 6. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com