ACTF8011

Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com The ACTF8011/881.5/DCC6C is a low-loss, compact, and economical surface-acoustic-wave (SAW) RF filter in a surface-mount ceramic DCC6C case for AMPS, CDMA and TDMA applications. 1. Package Dimensions (DCC6C) 2. Pin 2 5 others Sign A B C D Data (unit: mm) 0.6 1.5 1.5 1.8 Configuration Input / Output Output / Input Case Ground Sign E F G Data (unit: mm) 1.1 3.0 3.0 2-4. · • The dot indicates terminal 1 3. Test Circuit No impedance matching required for operation at 50 Ω. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 1 OF 3 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 4. Frequency Characteristics 5. Performance 5-1. Maximum Ratings Rating Input Power Level DC Voltage Storage Temperature Soldering Temperature Value 10 12 -40 to +85 +235 Units dBm V °C °C In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 2 OF 3 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 5-2. Electronic Characteristics Parameter Centre Frequency 3dB Bandwidth Usable Bandwidth Insertion Loss 869.00 MHz …. 894.00 MHz Amplitude Variation (p-p) 869.00 MHz …. 894.00 MHz Absolute Attenuation 10.00 MHZ …. 779.00 MHz 779.00 MHz …. 849.00 MHz 914.00 MHz …. 970.00 MHz 970.00 MHz …. 1049.0 MHz 1049.0 MHz …. 2000.0 MHz Input / Output Impedance Operating Temperature Range TOP -30 Δα -α 45 40 20 45 40 50 45 28 55 50 50 25 +80 -----dB 0.8 1.5 dB fC BW3 BWUES IL -2.7 3.5 dB Minimum ---- Typical 881.500 ±17.6 ±12.5 Maximum ---- Unit MHz MHz MHz Ω °C iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling 1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 2. 3. 4. 5. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 3 OF 3