ACTF8014

Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com The ACTF8014/897.5/DCC6 is a low-loss, compact, and economical surface-acoustic-wave (SAW) RF filter in a surface-mount ceramic DCC6 case for mobile communications ISM900 systems. It provides low insertion loss and high attenuation. ( Nominal Centre Frequency 897.5 MHz) 1. Package Dimension (DCC6) 2. Pin 2 5 1,3,4,6 Sign A B C D Data (unit: mm) 1.9 0.64 1.0 1.27 Sign E F G Configuration Input Output Ground Data (unit: mm) 1.2 3.8 3.8 3. Test Circuit In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 4. Frequency Characteristics 5. Performance 5-1.Maximum Ratings Rating Input Power Level DC Voltage Storage Temperature Range Operating Temperature Range Pin VDC Tstg TA Value 10 12 -40 to +85 -10 to +65 Units dBm V °C °C In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 5-2.Electronic Characteristics Characteristic Nominal Centre Frequency Usable Pass Bandwidth Insertion Loss 884.50 …. 910.50 MHz Passband Ripple 884.50 …. 910.50 MHz Absolute Attenuation DC …. 783.00 MHz 783.00 …. 863.00 MHz 933.00 …. 1063.0 MHz 1063.0 …. 2000.0 MHz Input / Output Impedance (Nominal) α 25 28 32 20 27 33 42 25 50 ----dB dB dB dB Ω Δα fC BW IL Minimum ----Typical 897.500 26 3.0 -Maximum --4.5 2.0 Units MHz MHz dB dB iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 2. 3. 4. 5. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com