ACTF9027

Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com The ACTF9027/1842.5/DCC6C is a low-loss, compact, and economical surface-acoustic-wave (SAW) RF filter in a surface-mount ceramic DCC6C case for mobile telephone PCN system. 1.Package Dimensions (DCC6C) 2. Pin 2 5 1,3,4,6 Sign A B C D Data (unit: mm) 0.6 1.5 1.5 1.8 Configuration Input / Output Output / Input Case Ground Sign E F G Data (unit: mm) 1.1 3.0 3.0 3.Test Circuit In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 4.Typical frequency response 5.Performance 5-1.Maximum Ratings Rating Input Power Level DC Voltage Storage Temperature Range Operating Temperature Range Value 10 5 -40 to +85 -10 to +65 Unit dBm V °C °C In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 5-2.Electronic Characteristics Characteristic Centre Frequency Insertion Loss 1805 …. 1880 MHz Absolute Attenuation DC …. 1500 MHz 1600 …. 1710 MHz 1710 …. 1785 MHz 1920 …. 2400 MHz 3610…. 3760 MHz 5415 …. 5640 MHz Amplitude Ripple (p-p) 1805 …. 1880 MHz Input / Output Impedance (Nominal) Δα -1.8 50 2.5 dB Ω α 20 22 10 24 20 10 22 25 20 27 25 15 ------dB dB dB dB dB dB fC IL -3.5 5.0 dB Minimum -Typical 1842.50 Maximum -Unit MHz iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. The frequency f C is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 3. 4. 5. 6. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com