APT15D100BHBG

1000V 2x15A APT15D100BHB APT15D100BHBG* ® *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE TO PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Output Rectifiers for Switchmode Power Supply • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular TO-247 Package • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • Low Leakage Current • Increased System Power Density 1 2 -2 4 7 3 1 3 2 1 - Cathode 1 2 - Anode 1 Cathode 2 3 - Anode 2 MAXIMUM RATINGS Symbol VR All Ratings Per Leg: TC = 25°C unless otherwise specified. Characteristic / Test Conditions APT15D100BHB(G) UNIT 1000 Volts Maximum D.C. Reverse Voltage VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 121°C, Duty Cycle = 0.5) 15 IF(AV) RMS Forward Current (Square wave, 50% duty) 27 IFSM Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 80 TJ,TSTG TL Amps -55 to 175 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V MIN TYP MAX IF = 15A 1.9 2.3 IF = 30A 2.2 IF = 15A, TJ = 125°C 1.7 Volts VR = VR Rated 250 VR = VR Rated, TJ = 125°C 500 APT Website - http://www.advancedpower.com 17 UNIT µA pF 4-2005 VF Characteristic / Test Conditions 053-0018 Rev B Symbol DYNAMIC CHARACTERISTICS Symbol APT15D100BHB(G) Characteristic Test Conditions trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C Reverse Recovery Time Qrr Reverse Recovery Charge IF = 15A, diF/dt = -200A/µs VR = 667V, TC = 125°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM VR = 667V, TC = 25°C Maximum Reverse Recovery Current trr IRRM IF = 15A, diF/dt = -200A/µs IF = 15A, diF/dt = -1000A/µs VR = 667V, TC = 125°C Maximum Reverse Recovery Current MIN TYP MAX UNIT - 28 - 260 - 540 - 4 - 300 ns - 1550 nC - 9 - 150 ns - 2150 nC - 26 Amps MIN TYP ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions MAX RθJC Junction-to-Case Thermal Resistance 1.4 RθJA Junction-to-Ambient Thermal Resistance 40 WT Torque Package Weight oz 5.9 g 10 lb•in 1.1 N•m APT Reserves the right to change, without notice, the specifications and information contained herein. 0.9 1.20 0.7 0.80 0.5 Note: 0.60 0.3 0.40 10-5 t Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC 10-4 10-3 10-2 10-1 1.0 10 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL 4-2005 Junction temp (°C) 053-0018 Rev B t1 t2 SINGLE PULSE 0.1 0.05 0.20 0 PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 1.60 1.00 Power (watts) 0.752 °C/W 0.0016 J/°C 0.472 °C/W 0.0367 J/°C 0.178 °C/W 0.622 J/°C Case temperature (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL °C/W 0.22 Maximum Mounting Torque 1.40 UNIT 400 40 350 35 30 25 20 10 TJ = 150°C 5 0 TJ = 25°C TJ = 125°C 15 TJ = -55°C 0 0.5 1 1.5 2 2.5 3 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage Qrr, REVERSE RECOVERY CHARGE (nC) 3500 T = 125°C J V = 667V R 3000 30A 2500 2000 15A 1500 1000 7.5A 500 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change trr 1.0 0.6 0.4 Qrr 0.2 0.0 R 300 15A 250 7.5A 200 150 100 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 35 T = 125°C J V = 667V 30A R 30 25 20 15 15A 10 7.5A 5 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 35 Qrr IRRM T = 125°C J V = 667V 30A 0 Duty cycle = 0.5 T = 175°C J 30 trr 0.8 APT15D100BHB(G) 50 25 IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 1000A/µs) 1.2 trr, REVERSE RECOVERY TIME (ns) 45 IRRM, REVERSE RECOVERY CURRENT (A) IF, FORWARD CURRENT (A) TYPICAL PERFORMANCE CURVES 20 15 10 5 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 100 80 4-2005 60 40 20 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-0018 Rev B CJ, JUNCTION CAPACITANCE (pF) 120 APT15D100BHB(G) Vr diF /dt Adjust +18V APT10078B2LL 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 3 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions TO-247 Package Outline e1 SAC: Tin, Silver, Copper 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC Anode 1 / Cathode 2 20.80 (.819) 21.46 (.845) 3.55 (.140) 3.81 (.150) 4.50 (.177) Max. 4-2005 0.40 (.016) 0.79 (.031) 053-0018 Rev B 5.38 (.212) 6.20 (.244) 2.21 (.087) 2.59 (.102) 19.81 (.780) 20.32 (.800) 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) Cathode 1 Anode 1 / Cathode 2 Anode 2 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. 0.25 IRRM