APT15D60BCTG

600V 2x15A APT15D60BCT APT15D60BCTG* ® *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE TO PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular TO-247 Package • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • Low Leakage Current • Increased System Power Density • PFC 1 2 -2 4 7 3 1 3 2 1 - Anode 1 2 - Common Cathode Back of Case - Cathode 3 - Anode 2 MAXIMUM RATINGS Symbol VR All Ratings Per Leg: TC = 25°C unless otherwise specified. Characteristic / Test Conditions APT15D60BCT(G) UNIT 600 Volts Maximum D.C. Reverse Voltage VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 133°C, Duty Cycle = 0.5) 15 RMS Forward Current (Square wave, 50% duty) 32 IF(RMS) IFSM TJ,TSTG TL Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Amps 110 -55 to 175 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V MIN TYP MAX IF = 15A 1.6 1.8 IF = 60A 1.9 IF = 15A, TJ = 125°C 1.4 Volts VR = VR Rated 250 VR = VR Rated, TJ = 125°C 500 APT Website - http://www.advancedpower.com 23 UNIT µA pF 2-2005 VF Characteristic / Test Conditions 053-6015 Rev C Symbol DYNAMIC CHARACTERISTICS Symbol APT15D60BCT(G) Characteristic Test Conditions trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM - 21 - 80 - 95 - 3 - 150 ns - 520 nC - 7 - 60 ns - 810 nC - 22 Amps MIN TYP IF = 15A, diF/dt = -200A/µs Maximum Reverse Recovery Current Reverse Recovery Time Qrr Reverse Recovery Charge Reverse Recovery Time Qrr Reverse Recovery Charge VR = 400V, TC = 25°C IF = 15A, diF/dt = -200A/µs Maximum Reverse Recovery Current trr IRRM TYP IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C trr IRRM MIN VR = 400V, TC = 125°C IF = 15A, diF/dt = -1000A/µs Maximum Reverse Recovery Current VR = 400V, TC = 125°C MAX UNIT ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions RθJC Junction-to-Case Thermal Resistance RθJA Junction-to-Ambient Thermal Resistance WT Torque MAX 1.35 40 Package Weight oz 5.9 g 10 lb•in 1.1 N•m APT Reserves the right to change, without notice, the specifications and information contained herein. 0.9 0.7 0.80 0.5 Note: 0.60 0.3 0.40 t2 0.1 SINGLE PULSE 0.05 10 -5 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC 10 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION -4 RC MODEL 2-2005 Junction temp (°C) 053-6015 Rev C t1 t 0.20 0 PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 1.40 1.00 0.583 °C/W 0.00222 J/°C 0.767 °C/W 0.0598 J/°C Power (watts) Case temperature (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL °C/W 0.22 Maximum Mounting Torque 1.20 UNIT TYPICAL PERFORMANCE CURVES 40 30 TJ = 150°C 10 0 TJ = 25°C TJ = 125°C TJ = -55°C 0 Qrr, REVERSE RECOVERY CHARGE (nC) 1200 T = 125°C J V = 400V R 30A 1000 800 15A 600 400 7.5A 200 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.2 trr 1.0 IRRM 140 120 15A 100 7.5A 80 60 40 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change T = 125°C J V = 400V R 30A 25 20 15 15A 10 7.5A 5 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 40 Duty cycle = 0.5 T = 175°C J 35 trr Qrr 30 0 Qrr 0.6 0.4 R 30A 0 30 IF(AV) (A) 0.8 T = 125°C J V = 400V 160 20 0.5 1 1.5 2 2.5 3 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage Kf, DYNAMIC PARAMETERS (Normalized to 1000A/µs) trr, REVERSE RECOVERY TIME (ns) 50 20 APT15D60BCT(G) 180 IRRM, REVERSE RECOVERY CURRENT (A) IF, FORWARD CURRENT (A) 60 25 20 15 10 0.2 0.0 5 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 140 120 100 80 4-2005 60 40 20 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-6015 Rev C CJ, JUNCTION CAPACITANCE (pF) 160 APT15D60BCT(G) Vr diF /dt Adjust +18V APT5018BLL 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 3 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions TO-247 Package Outline e1 SAC: Tin, Silver, Copper 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC Common Cathode 20.80 (.819) 21.46 (.845) 3.55 (.138) 3.81 (.150) 4.50 (.177) Max. 4-2005 0.40 (.016) 0.79 (.031) 053-6015 Rev C 5.38 (.212) 6.20 (.244) 2.21 (.087) 2.59 (.102) 19.81 (.780) 20.32 (.800) 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) Anode 1 Common Cathode Anode 2 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. 0.25 IRRM