600V 15A
APT15D60BG
Pb Free Terminal Finish.
ULTRAFAST SOFT RECOVERY RECTIFIER DIODE
PRODUCT APPLICATIONS
PRODUCT FEATURES
PRODUCT BENEFITS
• Anti-Parallel Diode
-Switchmode Power Supply
-Inverters
• Free Wheeling Diode
-Motor Controllers
-Converters
-Inverters
• Snubber Diode
• Ultrafast Recovery Times
• Low Losses
• Soft Recovery Characteristics
• Low Noise Switching
• Popular TO-247 Package
• Cooler Operation
• Low Forward Voltage
• Higher Reliability Systems
• Low Leakage Current
• Increased System Power
Density
• PFC
2
1
1 - Cathode
2 - Anode
Back of Case - Cathode
MAXIMUM RATINGS
Symbol
VR
All Ratings: TC = 25°C unless otherwise specified.
APT15D60BG
Characteristic / Test Conditions
Maximum D.C. Reverse Voltage
VRRM
Maximum Peak Repetitive Reverse Voltage
VRWM
Maximum Working Peak Reverse Voltage
IF(AV)
Maximum Average Forward Current (TC = 133°C, Duty Cycle = 0.5)
15
RMS Forward Current (Square wave, 50% duty)
32
IF(RMS)
IFSM
TJ,TSTG
TL
UNIT
600
Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms)
Volts
Amps
110
-55 to 175
Operating and StorageTemperature Range
°C
300
Lead Temperature for 10 Sec.
STATIC ELECTRICAL CHARACTERISTICS
Symbol
053-6011 Rev H
1-2020
VF
Characteristic / Test Conditions
Forward Voltage
IRM
Maximum Reverse Leakage Current
CT
Junction Capacitance, VR = 200V
MIN
TYP
MAX
IF = 15A
1.6
1.8
IF = 30A
1.9
IF = 15A, TJ = 125°C
1.4
Volts
VR = VR Rated
150
VR = VR Rated, TJ = 125°C
500
Microsemi Website - http://www.microsemi.com
23
UNIT
µA
pF
APT15D60BG
DYNAMIC CHARACTERISTICS
Symbol
Characteristic
Test Conditions
trr
Reverse Recovery Time
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IF = 15A, diF/dt = -200A/µs
Maximum Reverse Recovery Current
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
VR = 400V, TC = 25°C
Maximum Reverse Recovery Current
trr
IRRM
IF = 15A, diF/dt = -200A/µs
VR = 400V, TC = 125°C
IF = 15A, diF/dt = -1000A/µs
Maximum Reverse Recovery Current
VR = 400V, TC = 125°C
MIN
TYP
-
21
-
80
-
95
-
3
-
150
ns
-
520
nC
-
7
-
60
ns
-
810
nC
-
22
Amps
MIN
TYP
MAX
UNIT
ns
nC
-
-
Amps
Amps
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol
Characteristic / Test Conditions
RθJC
Junction-to-Case Thermal Resistance
RθJA
Junction-to-Ambient Thermal Resistance
WT
Torque
MAX
1.35
40
Package Weight
oz
5.9
g
10
lb•in
1.1
N•m
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.9
0.7
0.80
0.5
Note:
0.60
0.3
0.40
t2
0.1
SINGLE PULSE
0.05
10
-5
Duty Factor D = 1/t2
Peak TJ = PDM x ZθJC + TC
10
10-3
10-2
10-1
1.0
RECTANGULAR PULSE DURATION (seconds)
FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION
-4
RC MODEL
1-2020
Junction
temp (°C)
053-6011 Rev H
t1
t
0.20
0
PDM
Z JC, THERMAL IMPEDANCE (°C/W)
θ
1.40
1.00
0.583 °C/W
0.00222 J/°C
0.767 °C/W
0.0598 J/°C
Power
(watts)
Case temperature (°C)
FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL
°C/W
0.22
Maximum Mounting Torque
1.20
UNIT
TYPICAL PERFORMANCE CURVES
40
30
TJ = 150°C
10
0
TJ = 25°C
TJ = 125°C
TJ = -55°C
0
Qrr, REVERSE RECOVERY CHARGE
(nC)
1200
T = 125°C
J
V = 400V
R
30A
1000
800
15A
600
400
7.5A
200
0
0
200
400
600
800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 4. Reverse Recovery Charge vs. Current Rate of Change
trr
1.0
IRRM
0.8
120
15A
100
7.5A
80
60
40
Qrr
30
T = 125°C
J
V = 400V
R
30A
25
20
15
15A
10
7.5A
5
0
200
400
600
800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 5. Reverse Recovery Current vs. Current Rate of Change
40
Duty cycle = 0.5
T = 175°C
J
35
30
25
20
15
10
0.0
5
25
50
75
100
125
150
TJ, JUNCTION TEMPERATURE (°C)
Figure 6. Dynamic Parameters vs. Junction Temperature
0
160
CJ, JUNCTION CAPACITANCE
(pF)
140
0
trr
0.2
1-2020
R
30A
0
200
400
600
800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE(A/µs)
Figure 3. Reverse Recovery Time vs. Current Rate of Change
Qrr
0.6
0.4
160
0
IF(AV) (A)
Kf, DYNAMIC PARAMETERS
(Normalized to 1000A/µs)
1.2
T = 125°C
J
V = 400V
20
0.5
1
1.5
2
2.5
3
VF, ANODE-TO-CATHODE VOLTAGE (V)
Figure 2. Forward Current vs. Forward Voltage
053-6011 Rev H
trr, REVERSE RECOVERY TIME
(ns)
50
20
APT15D60BG
180
IRRM, REVERSE RECOVERY CURRENT
(A)
IF, FORWARD CURRENT
(A)
60
140
120
100
80
60
40
20
0
1
10
100 200
VR, REVERSE VOLTAGE (V)
Figure 8. Junction Capacitance vs. Reverse Voltage
0
25
50
75
100
125
150
175
Case Temperature (°C)
Figure 7. Maximum Average Forward Current vs. CaseTemperature
APT15D60BG
Vr
diF /dt Adjust
+18V
APT5018BLL
0V
D.U.T.
30µH
trr/Qrr
Waveform
PEARSON 2878
CURRENT
TRANSFORMER
Figure 9. Diode Test Circuit
1
IF - Forward Conduction Current
2
diF /dt - Rate of Diode Current Change Through Zero Crossing.
3
IRRM - Maximum Reverse Recovery Current.
4
trr - Reverse Recovery Time, measured from zero crossing where diode
current goes from positive to negative, to the point at which the straight
line through IRRM and 0.25 IRRM passes through zero.
5
1
4
Zero
5
3
0.25 IRRM
2
Qrr - Area Under the Curve Defined by IRRM and trr.
Figure 10, Diode Reverse Recovery Waveform and Definitions
TO-247 Package Outline
Cathode
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
0.40 (.016)
0.79 (.031)
2.21 (.087)
2.59 (.102)
053-6011 Rev H
1-2020
Dimensions in Millimeters and (Inches)
Microsemi Headquarters
One Enterprise, Aliso Viejo,
CA 92656 USA
Within the USA: +1 (800) 713-4113
Outside the USA: +1 (949) 380-6100
Sales: +1 (949) 380-6136
Fax: +1 (949) 215-4996
Email: sales.support@microsemi.com
www.microsemi.com
© 2019 Microsemi. All rights reserved. Microsemi and the Microsemi logo
are trademarks of Microsemi Corporation. All other trademarks and service
marks are the property of their respective owners.
Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services
for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The
products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with
mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and
complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data
and performance specifications or parameters provided by Microsemi. It is the Buyer's responsibility to independently determine suitability of any
products and to test and verify the same. The information provided by Microsemi hereunder is provided "as is, where is" and with all faults, and the
entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights,
licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this
document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products
and services at any time without notice.
Microsemi, a wholly owned subsidiary of Microchip Technology Inc. (Nasdaq: MCHP), offers a comprehensive portfolio of semiconductor and system
solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened
analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time
solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication
solutions; security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design
capabilities and services. Microsemi is headquartered in Aliso Viejo, California, and has approximately 4,800 employees globally. Learn more at www.
microsemi.com.