APT15DQ60KG

APT15DQ60K(G) 600V 15A ULTRAFAST SOFT RECOVERY RECTIFIER DIODE (K) PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular TO-220 Package • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • Low Leakage Current • Increased System Power Density • PFC • Avalanche Energy Rated 1 2 2 1 1 - Cathode 2 - Anode Back of Case - Cathode MAXIMUM RATINGS Symbol VR All Ratings: TC = 25°C unless otherwise specified. APT15DQ60K(G) Characteristic / Test Conditions Maximum D.C. Reverse Voltage VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 129°C, Duty Cycle = 0.5) 15 RMS Forward Current (Square wave, 50% duty) 30 IFSM Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 110 EAVL Avalanche Energy (1A, 40mH) 20 IF(RMS) TJ,TSTG TL UNIT 600 Volts Amps mJ -55 to 175 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS VF Characteristic / Test Conditions Forward Voltage MIN TYP MAX IF = 15A 2.0 2.4 IF = 30A 2.5 IF = 15A, TJ = 125°C IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V Volts 1.56 VR = 600V 25 VR = 600V, TJ = 125°C Microsemi Website - http://www.microsemi.com UNIT 500 25 µA pF 053-4205 Rev J 9-2016 Symbol APT15DQ60K DYNAMIC CHARACTERISTICS Symbol Characteristic trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM Reverse Recovery Time Qrr Reverse Recovery Charge IF = 15A, diF/dt = -200A/µs VR = 400V, TC = 25°C IF = 15A, diF/dt = -200A/µs Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C Maximum Reverse Recovery Current trr IRRM MIN TYP MAX Test Conditions VR = 400V, TC = 125°C IF = 15A, diF/dt = -1000A/µs Maximum Reverse Recovery Current VR = 400V, TC = 125°C - 15 - 19 - 21 - 2 - UNIT ns nC Amps - 105 ns - 250 nC - 5 - - 55 ns - 420 nC - 15 Amps MIN TYP Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC WT Torque Characteristic / Test Conditions Junction-to-Case Thermal Resistance Package Weight MAX UNIT 1.35 °C/W 0.07 oz g Maximum Mounting Torque 10 lb•in 1.1 N•m Microsemi reserves the right to change, without notice, the specifications and information contained herein. 1.00 0.7 0.80 0.5 Note: 0.60 0.3 0.40 t1 t2 0.20 0 053-4205 Rev J 9-2016 D = 0.9 1.20 P DM Z JC, THERMAL IMPEDANCE (°C/W) θ 1.40 t 0.1 SINGLE PULSE 0.05 10 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION -5 10-4 Duty Factor D = 1 /t2 Peak T J = P DM x Z θJC + T C 140 50 120 trr, REVERSE RECOVERY TIME (ns) 60 TJ = 175°C 40 TJ = 125°C 30 20 10 0 TJ = 25°C TJ = -55°C 1 2 3 4 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage Qrr, REVERSE RECOVERY CHARGE (nC) 700 600 0 T =125°C J V =400V R 30A 500 400 15A 300 7.5A 200 100 0 0 200 400 600 800 1000 1200 1400 1600 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change R 30A 100 15A 80 7.5A 60 40 20 25 T =125°C J V =400V R 20 30A 15 10 5 15A 7.5A 0 0 200 400 600 800 1000 1200 1400 1600 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 35 Qrr trr 1.0 T =125°C J V =400V 0 200 400 600 800 1000 1200 1400 1600 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 30 Duty cycle = 0.5 T =175°C J 25 0.8 IRRM 0.6 IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 1000A/µs) 1.2 APT15DQ60K(G) 0 IRRM, REVERSE RECOVERY CURRENT (A) IF, FORWARD CURRENT (A) TYPICAL PERFORMANCE CURVES trr 0.4 Qrr 0.2 20 15 10 5 0.0 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 80 70 60 50 40 30 20 10 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-4205 Rev J 9-2016 CJ, JUNCTION CAPACITANCE (pF) 90 APT15DQ60K(G) Vr diF /dt Adjus t +18V APT6017LLL 0V D.U.T. 30µH trr/Q rr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 1 diF/dt - Rate of Diode Current Change Through Zero Crossing. Zer o 3 IRRM - Maximum Reverse Recovery Current 4 2 4 trr - Reverse Recovery Time measured from zero crossing where diode current goes from positive to negative, to the point at 5 3 2 which the straight line through IRRM and 0.25, IRRM passes through zero. 5 Qrr - Area Under the Curve Defined by IRRM and tRR. Figure 10. Diode Reverse Recovery Waveform Definition TO-220 (K) Package Outline e3 100% Sn 053-4205 Rev J 9-2016 Cathode Cathode Anode Dimensions in millimeters and [inches] 0.25 I RR M