APT15DS60BG

1 2 TO -24 7 D3PAK 1 - Cathode 2 2 - Anode 1 1 2 1 2 APT15DS60BG 600V APT15DS60SG 600V *G 13A 13A Denotes RoHS Compliant, Pb Free Terminal Finish. 2-300V HIGH FREQUENCY SOFT RECOVERY RECTIFIER DIODES IN SERIES PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular TO-247 Package or • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • High Blocking Voltage • Increased System Power • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers Surface Mount D3PAK Package • Low Leakage Current Density All Ratings: TC = 25°C unless otherwise specified. MAXIMUM RATINGS Symbol Characteristic / Test Conditions VR Maximum D.C. Reverse Voltage APT15DS60B_SG UNIT 600 Volts VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 77°C, Duty Cycle = 0.5) 13 RMS Forward Current (Square wave, 50% duty) 17 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 110 IF(RMS) IFSM TJ,TSTG TL Amps -55 to 150 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V TYP MAX IF = 15A 3.2 4.0 IF = 30A 4.2 IF = 15A, TJ = 125°C 2.4 150 VR = 600V, TJ = 125°C 500 APT Website - http://www.advancedpower.com Downloaded from Elcodis.com electronic components distributor Volts VR = 600V 24 UNIT µA 2-2007 VF MIN pF 053-3006 Rev C Symbol DYNAMIC CHARACTERISTICS Symbol APT15DS60B_SG Characteristic Test Conditions MIN TYP MAX UNIT trr Reverse Recovery Time I = 1A, di /dt = -100A/µs, V = 30V, T = 25°C F F R J - 13 trr Reverse Recovery Time - 14 Qrr Reverse Recovery Charge - 12 - 1.5 - 31 ns - 85 nC - 4.7 - 20 ns - 160 nC - 18 Amps MIN TYP IRRM Reverse Recovery Time Qrr Reverse Recovery Charge IF = 15A, diF/dt = -200A/µs VR = 400V, TC = 125°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM VR = 400V, TC = 25°C Maximum Reverse Recovery Current trr IRRM IF = 15A, diF/dt = -200A/µs IF = 15A, diF/dt = -1000A/µs VR = 400V, TC = 125°C Maximum Reverse Recovery Current ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions MAX RθJC Junction-to-Case Thermal Resistance 1.5 RθJA Junction-to-Ambient Thermal Resistance 40 WT Torque Package Weight oz 5.9 g 10 lb•in 1.1 N•m APT Reserves the right to change, without notice, the specifications and information contained herein. 0.9 1.20 0.7 0.80 0.5 Note: PDM 0.60 0.3 0.40 t2 0.1 0.20 0 SINGLE PULSE Peak TJ = PDM x ZθJC + TC 0.05 10-5 10-4 10-3 10-2 10-1 1.0 10 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION 2-2007 TJ ( C) 053-3006 Rev C t1 Duty Factor D = t1/t2 TC ( C) 0.355 0.854 0.291 Dissipated Power (Watts) 0.00229 0.0311 0.444 ZEXT Z JC, THERMAL IMPEDANCE (°C/W) θ 1.60 1.00 ZEXT are the external thermal impedances: Case to sink, sink to ambient, etc. Set to zero when modeling only the case to junction. FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL Downloaded from Elcodis.com electronic components distributor °C/W 0.22 Maximum Mounting Torque 1.40 UNIT TYPICAL PERFORMANCE CURVES APT15DS60B_SG 40 60 IF, FORWARD CURRENT (A) 50 40 TJ = 150°C 30 TJ = 25°C TJ = 125°C 20 10 trr, REVERSE RECOVERY TIME (ns) 30A Qrr, REVERSE RECOVERY CHARGE (nC) 200 30A 15A 100 7.5A 50 0 15 10 TJ = 125°C VR = 400V 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change TJ = 125°C VR = 400V 30A 16 12 15A 8 7.5A 4 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 1.4 20 1.2 trr Qrr 16 1.0 trr IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 800A/µs) 20 20 TJ = 125°C VR = 400V 150 7.5A 25 0 1 2 3 4 5 6 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage IRRM, REVERSE RECOVERY CURRENT (A) 0 15A 30 5 TJ = -55°C 0 35 0.8 0.6 Qrr IRRM 0.4 8 4 0.2 0.0 12 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 Duty cycle = 0.5 TJ = 150°C 25 50 75 100 125 150 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 100 80 2-2007 60 40 20 0 .4 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage Downloaded from Elcodis.com electronic components distributor 053-3006 Rev C CJ, JUNCTION CAPACITANCE (pF) 120 APT15DS60B_SG Vr diF /dt Adjust +18V APT6017BLL 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 0.25 IRRM 3 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions e13 SAC: 100%Tin, Sn Silver, Copper e1 SAC: Tin, Silver, Copper 3 TO-247 Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) D PAK Package Outline 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC 15.85 (.624) 16.05(.632) 0.40 (.016) 0.65 (.026) 053-3006 Rev C 2-2007 4.50 (.177) Max. 1.65 (.065) 2.13 (.084) 12.40 (.488) 12.70 (.500) 18.70 (.736) 19.10 (.752) 3.50 (.138) 3.81 (.150) 19.81 (.780) 20.32 (.800) 13.30 (.524) 13.60(.535) 5.38 (.212) 6.20 (.244) 20.80 (.819) 21.46 (.845) 0.40 (.016) 0.79 (.031) 1.00 (.039) 1.15(.045) 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.) 1.01 (.040) 1.40 (.055) 2.40 (.094) 2.70 (.106) (Base of Lead) Heat Sink (Isolated) and Leads are Plated Anode 2.21 (.087) 2.59 (.102) Cathode 10.90 (.430) BSC Dimensions in Millimeters and (Inches) Anode (Isolated) Cathode Dimensions in Millimeters (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. Downloaded from Elcodis.com electronic components distributor