APT28M120B2

APT28M120B2 APT28M120L 1200V, 29A, 0.53Ω Max N-Channel MOSFET Power MOS 8™ is a high speed, high voltage N-channel switch-mode power MOSFET. A proprietary planar stripe design yields excellent reliability and manufacturability. Low switching loss is achieved with low input capacitance and ultra low Crss "Miller" capacitance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control slew rates during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. Reliability in flyback, boost, forward, and other circuits is enhanced by the high avalanche energy capability. T-Ma x TM TO-264 APT28M120B2 APT28M120L D Single die MOSFET G S TYPICAL APPLICATIONS FEATURES • Fast switching with low EMI/RFI • PFC and other boost converter • Low RDS(on) • Buck converter • Ultra low Crss for improved noise immunity • Two switch forward (asymmetrical bridge) • Low gate charge • Single switch forward • Avalanche energy rated • Flyback • RoHS compliant • Inverters Absolute Maximum Ratings Symbol ID Parameter Unit Ratings Continuous Drain Current @ TC = 25°C 29 Continuous Drain Current @ TC = 100°C 18 A IDM Pulsed Drain Current VGS Gate-Source Voltage ±30 V EAS Single Pulse Avalanche Energy 2 2165 mJ IAR Avalanche Current, Repetitive or Non-Repetitive 14 A 1 104 Thermal and Mechanical Characteristics Max Unit W PD Total Power Dissipation @ TC = 25°C 1135 RθJC Junction to Case Thermal Resistance 0.11 RθCS Case to Sink Thermal Resistance, Flat, Greased Surface TJ,TSTG Operating and Storage Junction Temperature Range TL Soldering Temperature for 10 Seconds (1.6mm from case) WT Package Weight Torque Mounting Torque ( TO-264 Package), 4-40 or M3 screw Microsemi Website - http://www.microsemi.com 0.11 -55 150 300 °C/W °C 0.22 oz 6.2 g 10 in·lbf 1.1 N·m 7-2011 Typ Rev C Min Characteristic 050-8097 Symbol Static Characteristics TJ = 25°C unless otherwise specified Symbol Parameter Test Conditions Min VBR(DSS) Drain-Source Breakdown Voltage VGS = 0V, ID = 250μA 1200 ∆VBR(DSS)/∆TJ Drain-Source On Resistance VGS(th) Gate-Source Threshold Voltage ∆VGS(th)/∆TJ VGS = 10V, ID = 14A 3 Zero Gate Voltage Drain Current IGSS Gate-Source Leakage Current Dynamic Characteristics VDS = 1200V VGS = 0V Forward Transconductance Ciss Input Capacitance Crss Reverse Transfer Capacitance Coss Output Capacitance Typ Max 1.41 0.45 4 -10 0.53 5 TJ = 25°C 100 500 ±100 TJ = 125°C VGS = ±30V Unit V V/°C Ω V mV/°C μA nA TJ = 25°C unless otherwise specified Parameter gfs 3 VGS = VDS, ID = 2.5mA Threshold Voltage Temperature Coefficient IDSS Symbol Reference to 25°C, ID = 250μA Breakdown Voltage Temperature Coefficient RDS(on) APT28M120B2_L Min Test Conditions VDS = 50V, ID = 14A VGS = 0V, VDS = 25V f = 1MHz Co(cr) 4 Effective Output Capacitance, Charge Related Co(er) 5 Effective Output Capacitance, Energy Related Typ 31 9670 115 715 Max Unit S pF 275 VGS = 0V, VDS = 0V to 800V 140 Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge td(on) Turn-On Delay Time Resistive Switching Current Rise Time VDD = 800V, ID = 14A tr td(off) tf 300 50 140 50 31 170 48 VGS = 0 to 10V, ID = 14A, VDS = 600V RG = 2.2Ω 6 , VGG = 15V Turn-Off Delay Time Current Fall Time nC ns Source-Drain Diode Characteristics Symbol IS ISM Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Test Conditions MOSFET symbol showing the integral reverse p-n junction diode (body diode) Diode Forward Voltage ISD = 14A, TJ = 25°C, VGS = 0V trr Reverse Recovery Time ISD = 14A 3 Qrr Reverse Recovery Charge Peak Recovery dv/dt Typ Max Unit 29 A G VSD dv/dt Min D 104 S diSD/dt = 100A/μs, TJ = 25°C ISD ≤ 14A, di/dt ≤1000A/μs, VDD = 100V, TJ = 125°C 1 1290 33 V ns μC 10 V/ns 1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25°C, L = 22.09mH, RG = 2.2Ω, IAS = 14A. 3 Pulse test: Pulse Width < 380μs, duty cycle < 2%. 050-8097 Rev C 7-2011 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -4.40E-7/VDS^2 + 5.34E-8/VDS + 7.59E-11. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452) Microsemi reserves the right to change, without notice, the specifications and information contained herein. APT28M120B2_L 90 V GS 30 = 10V T = 125°C J 80 70 ID, DRIAN CURRENT (A) TJ = -55°C 60 50 40 TJ = 25°C 30 20 15 5V 10 TJ = 150°C 0 0 5 10 15 20 25 30 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) 4.5V 0 Figure 2, Output Characteristics 100 NORMALIZED TO 2.5 250μSEC. PULSE TEST @ ID(ON) x RDS(ON) MAX. VGS = 10V @ 14A ID, DRAIN CURRENT (A) RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE Figure 1, Output Characteristics 3.0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Rev C 0 = 6, 7, 8 & 9V GS 5 TJ = 125°C 10 V 20 050-8097 ID, DRAIN CURRENT (A) 25 200 100 100 IDM 10 13μs 100μs 1ms 1 0.1 10ms Rds(on) Rds(on) 10 13μs 100μs 1ms TJ = 150°C TC = 25°C 1 DC line 0.1 10 100 1200 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 9, Forward Safe Operating Area 10ms Scaling for Different Case & Junction Temperatures: 100ms ID = ID(T = 25°C)*(TJ - TC)/125 C DC line 100ms TJ = 125°C TC = 75°C 1 IDM ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) APT28M120B2_L 200 1 10 100 1200 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 10, Maximum Forward Safe Operating Area 0.10 D = 0.9 0.08 0.7 0.06 0.5 Note: P DM ZθJC, THERMAL IMPEDANCE (°C/W) 0.12 0.04 t1 0.3 t2 t1 = Pulse Duration SINGLE PULSE 0.02 t Duty Factor D = 1 /t2 Peak T J = P DM x Z θJC + T C 0.1 0.05 0 10 10-4 10-3 10-2 10-1 RECTANGULAR PULSE DURATION (seconds) Figure 11. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration -5 T-MAX® (B2) Package Outline 1.0 TO-264 (L) Package Outline e3 100% Sn Plated 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 15.49 (.610) 16.26 (.640) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.38 (.212) 6.20 (.244) 5.79 (.228) 6.20 (.244) Drai n Drai n 20.80 (.819) 21.46 (.845) 050-8097 Rev C 7-2011 4.50 (.177) Max. 0.40 (.016) 1.016(.040) 25.48 (1.003) 26.49 (1.043) 2.87 (.113) 3.12 (.123) 2.29 (.090) 2.69 (.106) 1.65 (.065) 2.13 (.084) 19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055) 19.81 (.780) 21.39 (.842) Gate Drain Source 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. These dimensions are equal to the TO-247 without the mounting hole. Dimensions in Millimeters (Inches) 0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118) 0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters (Inches) 2.29 (.090) 2.69 (.106) Gate Drai n Source Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Microsemi: APT28M120B2