APT2X60D40J

2 1 3 4 2 1 Anti-Parallel APT2X60D40J 3 4 2 1 3 4 Parallel APT2X61D40J 7 22 TO S "UL Recognized" ISOTOP ® ® APT2X61D40J APT2X60D40J 400V 400V 60A 60A DUAL DIE ISOTOP® PACKAGE ULTRAFAST SOFT RECOVERY RECTIFIER DIODE PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular SOT-227 Package • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • High Blocking Voltage • Increased System Power • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers • Low Leakage Current MAXIMUM RATINGS Symbol VR Density All Ratings: TC = 25°C unless otherwise specified. Characteristic / Test Conditions APT2X61_60D40J UNIT 400 Volts Maximum D.C. Reverse Voltage VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 115°C, Duty Cycle = 0.5) 60 RMS Forward Current (Square wave, 50% duty) 99 IF(RMS) IFSM TJ,TSTG TL Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Amps 600 -55 to 175 Operating and StorageTemperature Range Lead Temperature for 10 Sec. °C 300 STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V MIN TYP MAX IF = 60A 1.3 1.5 IF = 120A 1.6 IF = 60A, TJ = 125°C 1.2 250 VR = VR Rated, TJ = 125°C 500 APT Website - http://www.advancedpower.com Downloaded from Elcodis.com electronic components distributor Volts VR = VR Rated 120 UNIT µA 2-2005 VF Characteristic / Test Conditions pF 053-4005 Rev F Symbol DYNAMIC CHARACTERISTICS Symbol APT2X61_60D40J Characteristic Test Conditions trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C Reverse Recovery Time Qrr Reverse Recovery Charge IF = 60A, diF/dt = -200A/µs VR = 266V, TC = 125°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM VR = 266V, TC = 25°C Maximum Reverse Recovery Current trr IRRM IF = 60A, diF/dt = -200A/µs IF = 60A, diF/dt = -800A/µs VR = 266V, TC = 125°C Maximum Reverse Recovery Current MIN TYP MAX UNIT - 30 - 37 - 80 - 4 - 110 ns - 540 nC - 10 - 65 ns - 1050 nC - 27 Amps MIN TYP ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions MAX RθJC Junction-to-Case Thermal Resistance .60 RθJA Junction-to-Ambient Thermal Resistance 20 WT Torque Package Weight oz 29.2 g 10 lb•in 1.1 N•m APT Reserves the right to change, without notice, the specifications and information contained herein. 0.9 0.7 Note: 0.5 PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.80 0.40 0.3 0.20 t 0 10 -5 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC SINGLE PULSE 10 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION -4 RC MODEL 2-2005 Junction temp (°C) 053-4005 Rev F t1 t2 0.1 0.05 Power (watts) 0.159 °C/W 0.00560 J/°C 0.255 °C/W 0.0849 J/°C 0.186 °C/W 0.489 J/°C Case temperature (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL Downloaded from Elcodis.com electronic components distributor °C/W 1.03 Maximum Mounting Torque 0.60 UNIT TYPICAL PERFORMANCE CURVES 180 120 100 80 TJ = 125°C 40 TJ = 150°C 20 0 TJ = 25°C 0 Qrr, REVERSE RECOVERY CHARGE (nC) 1400 T = 125°C J V = 266V R 1200 T = 125°C J V = 266V 120A R 120 60A 100 30A 80 60 40 20 TJ = -55°C 0.5 1 1.5 2 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 120A 1000 60A 800 600 30A 400 200 0 0 200 400 600 800 1000 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.2 trr 1.0 0 0 200 400 600 800 1000 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 30 T = 125°C J V = 266V R 25 120A 20 60A 15 30A 10 5 0 0 200 400 600 800 1000 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 120 Qrr Duty cycle = 0.5 T = 175°C J 100 IRRM 0.8 80 IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 800A/µs) trr, REVERSE RECOVERY TIME (ns) 140 IRRM, REVERSE RECOVERY CURRENT (A) IF, FORWARD CURRENT (A) 160 60 APT2X61_60D40J 140 trr 0.6 0.4 40 Qrr 0.2 0.0 60 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 20 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 700 600 500 400 2-2005 300 200 100 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage Downloaded from Elcodis.com electronic components distributor 053-4005 Rev F CJ, JUNCTION CAPACITANCE (pF) 800 APT2X61_60D40J Vr diF /dt Adjust +18V APT30M30LLL 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 3 0.25 IRRM 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions SOT-227 (ISOTOP®) Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) 8.9 (.350) 9.6 (.378) Hex Nut M4 H100 (4 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 053-4005 Rev F 2-2005 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 30.1 (1.185) 30.3 (1.193) 1.95 (.077) 2.14 (.084) Anti-parallel Anode 2 APT2X60D40J Parallel APT2X61D40J Cathode 1 Cathode 1 Anode 1 Anode 1 Anode 2 38.0 (1.496) 38.2 (1.504) Dimensions in Millimeters and (Inches) Cathode 2 Cathode 2 ISOTOP® is a Registered Trademark of SGS Thomson. APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. Downloaded from Elcodis.com electronic components distributor