APT30S20BG

1 2 TO -24 7 1 - Cathode 2 - Anode Back of Case - Cathode D3PAK 1 APT30S20B(G) APT30S20S(G) 200V 45A 200V 45A *G Denotes RoHS Compliant, Pb Free Terminal Finish. 2 2 1 HIGH VOLTAGE SCHOTTKY DIODE PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular TO-247 Package or • Cooler Operation • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) 48 Volt Output Rectifiers High Speed Rectifiers Surface Mount D3PAK Package • Low Forward Voltage • Higher Reliability Systems • High Blocking Voltage • Increased System Power • Low Leakage Current All Ratings: TC = 25°C unless otherwise specified. MAXIMUM RATINGS Symbol VR APT30S20B_S(G) Characteristic / Test Conditions Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 125°C, Duty Cycle = 0.5) IFSM TJ,TSTG TL EVAL UNIT Maximum D.C. Reverse Voltage VRRM IF(RMS) Density 200 Volts 45 RMS Forward Current (Square wave, 50% duty) 121 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 320 Amps -55 to 150 Operating and StorageTemperature Range °C 300 Lead Temperature Case for 10 Sec. 30 Avalanche Energy (2A, 15mH) mJ STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V TYP MAX IF = 30A .80 .85 IF = 60A .91 IF = 30A, TJ = 125°C .67 Volts VR = VR Rated 0.5 VR = VR Rated, TJ = 125°C 15 APT Website - http://www.advancedpower.com UNIT mA 150 pF 10-2003 VF MIN 053-6031 Rev D Symbol APT30S20B_S(G) DYNAMIC CHARACTERISTICS Characteristic Symbol Test Conditions trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM MIN TYP - 55 ns - 190 nC - 6 - 100 ns - 450 nC - 9 - 70 ns - 960 nC - 24 Amps MIN TYP IF = 30A, diF/dt = -200A/µs VR = 133V, TC = 25°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 30A, diF/dt = -200A/µs VR = 133V, TC = 125°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 30A, diF/dt = -700A/µs VR = 133V, TC = 125°C Maximum Reverse Recovery Current MAX - - UNIT Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions MAX RθJC Junction-to-Case Thermal Resistance .58 RθJA Junction-to-Ambient Thermal Resistance 40 WT Torque °C/W 0.22 oz 5.9 g Package Weight 10 lb•in 1.1 N•m Maximum Mounting Torque APT Reserves the right to change, without notice, the specifications and information contained herein. 0.9 0.5 0.7 0.4 0.3 0.5 0.2 0.3 Note: PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.6 Duty Factor D = t1/t2 0.1 10-5 Peak TJ = PDM x ZθJC + TC SINGLE PULSE 0.05 10-4 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL Junction temp (°C) 10-2003 t1 t2 0.1 0 053-6031 Rev D UNIT 0.250 °C/W 0.00518 J/°C 0.330 °C/W 0.139 J/°C Power (watts) Case temperature (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL TYPICAL PERFORMANCE CURVES trr, REVERSE RECOVERY TIME (ns) IF, FORWARD CURRENT (A) 80 70 TJ = 150°C 60 50 40 TJ = 125°C 30 20 10 0.2 0.4 0.6 0.8 1 1.2 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 30A 80 15A 60 40 20 0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 35 TJ = 125°C VR = 133V 1600 1400 60A 1200 1000 800 30A 600 15A 400 200 0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change IRRM, REVERSE RECOVERY CURRENT (A) Qrr, REVERSE RECOVERY CHARGE (nC) 100 0 0 0 TJ = 125°C VR = 133V 30 60A 25 20 15 10 30A 15A 5 0 0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 140 1.4 1.2 trr 120 Qrr 1.0 100 IRRM 0.8 IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 700A/µs) 60A TJ = -55°C 1800 trr 0.6 Qrr 0.4 0.2 0.0 TJ = 125°C VR = 133V TJ = 25°C 90 0 APT30S20B_S(G) 120 100 80 60 40 20 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 Duty cycle = 0.5 TJ = 150°C 25 50 75 100 125 150 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 2000 1500 10-2003 1000 500 0 .3 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-6031 Rev D CJ, JUNCTION CAPACITANCE (pF) 2500 APT30S20B_S(G) Vr diF /dt Adjust +18V APT20M36BLL 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 0.25 IRRM 3 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions 3 TO-247 Package Outline e1 SAC: Tin, Silver, Copper D PAK Package Outline e3 100% Sn Plated 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC 5.38 (.212) 6.20 (.244) Cathode 10-2003 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 15.85 (.624) 16.05 (.632) 1.00 (.039) 1.15 (.045) 20.80 (.819) 21.46 (.845) 0.40 (.016) 0.65 (.026) 0.40 (.016) 0.79 (.031) 1.65 (.065) 2.13 (.084) 19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055) 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.) Anode 2.21 (.087) 2.59 (.102) Cathode 10.90 (.430) BSC Dimensions in Millimeters and (Inches) 13.30 (.524) 13.60 (.535) 12.40 (.488) 12.70 (.500) 18.70 (.736) 19.10 (.752) 3.50 (.138) 3.81 (.150) 4.50 (.177) Max. 053-6031 Rev D Cathode (Heat Sink) 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) Anode Cathode Dimensions in Millimeters (Inches) 2.40 (.094) 2.70 (.106) (Base of Lead) Heat Sink (Cathode) and Leads are Plated