APT35GT120JU3

APT35GT120JU3 ISOTOP® Buck chopper Trench + Field Stop IGBT3 C Application  AC and DC motor control  Switched Mode Power Supplies G Features  Trench + Field Stop IGBT3 Technology - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - RBSOA and SCSOA rated  ISOTOP® Package (SOT-227)  Very low stray inductance  High level of integration E A Benefits  Low conduction losses  Stable temperature behavior  Very rugged  Direct mounting to heatsink (isolated package)  Low junction to case thermal resistance  Easy paralleling due to positive TC of VCEsat  RoHS Compliant A E C G VCES = 1200V IC = 35A @ Tc = 80°C ISOTOP Absolute maximum ratings Parameter Collector - Emitter Breakdown Voltage TC = 25°C Max ratings 1200 55 35 80 ±20 260 TC = 80°C 27 TC = 25°C TC = 80°C TC = 25°C Continuous Collector Current Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation IFAV Maximum Average Forward Current Duty cycle=0.5 IFRMS RMS Forward Current (Square wave, 50% duty) 34 Unit V A V W A These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. www.microsemi.com 1-8 APT35GT120JU3 – Rev 2 October, 2012 Symbol VCES IC1 IC2 ICM VGE PD APT35GT120JU3 All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic ICES Zero Gate Voltage Collector Current VCE(sat) Collector Emitter saturation Voltage VGE(th) IGES Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions VGE = 0V, VCE = 1200V Tj = 25°C VGE =15V IC = 35A Tj = 125°C VGE = VCE, IC = 3mA VGE = ±20V, VCE = 0V Min Typ 1.4 1.7 2.0 Test Conditions VGE = 0V VCE = 25V f = 1MHz Min 5.0 Max 5 2.1 Unit mA 6.5 500 V nA Max Unit V Dynamic Characteristics Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Td(off) Turn-off Delay Time Tf Td(on) Tr Td(off) Tf Eon Eoff Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Resistive Switching (25°C) VGE = 15V VBus = 600V IC = 35A RG = 27 Inductive Switching (125°C) VGE = 15V VBus = 600V IC = 35A RG = 27 www.microsemi.com Typ 2530 132 115 85 30 420 62 90 45 520 90 5.8 4.6 pF ns ns mJ 2-8 APT35GT120JU3 – Rev 2 October, 2012 Symbol Cies Coes Cres Td(on) Tr APT35GT120JU3 Chopper diode ratings and characteristics Symbol VF Characteristic Diode Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance Reverse Recovery Time trr Test Conditions IF = 30A IF = 60A IF = 30A VR = 1200V VR = 1200V VR = 200V IF=1A,VR=30V di/dt =100A/µs Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C 31 IF = 30A VR = 800V di/dt =200A/µs Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C 370 500 5 12 660 3450 220 4650 37 Reverse Recovery Time IRRM Qrr trr Qrr IRRM Maximum Reverse Recovery Current Reverse Recovery Charge Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 30A VR = 800V di/dt =1000A/µs Min Typ 2.0 2.3 1.8 Max 2.5 V 250 500 32 Tj = 125°C Unit µA pF ns A nC ns nC A Thermal and package characteristics Symbol Characteristic Min RthJC Junction to Case Thermal Resistance RthJA VISOL TJ,TSTG TL Torque Wt Junction to Ambient (IGBT & Diode) Typ IGBT Diode RMS Isolation Voltage, any terminal to case t =1 min, 50/60Hz Storage Temperature Range Max Lead Temp for Soldering:0.063” from case for 10 sec Mounting torque (Mounting = 8-32 or 4mm Machine and terminals = 4mm Machine) Package Weight 2500 -55 Max 0.48 1.1 20 Unit °C/W V 150 300 1.5 29.2 °C N.m g Operating Frequency vs Collector Current 60 V CE=600V D=50% RG=27Ω TJ =125°C 50 40 30 20 10 0 0 10 20 30 40 50 60 IC (A) www.microsemi.com 3-8 APT35GT120JU3 – Rev 2 October, 2012 Fmax, Operating Frequency (kHz) Typical IGBT Performance Curve APT35GT120JU3 Output Characteristics (VGE=15V) Output Characteristics 70 70 60 TJ=125°C VGE=17V 50 IC (A) IC (A) 50 40 30 VGE=15V VGE=9V 30 20 10 10 0 0 1 2 VCE (V) 3 4 0 1 2 VCE (V) TJ=25°C 50 10 E (mJ) TJ=125°C 30 8 Eoff 6 20 4 10 2 0 0 5 6 7 8 9 10 11 10 12 20 30 Switching Energy Losses vs Gate Resistance VCE = 600V VGE =15V IC = 35A TJ = 125°C 40 50 60 70 80 IC (A) VGE (V) Reverse Safe Operating Area 90 Eon 80 70 60 5 IC (A) E (mJ) Eon VCE = 600V VGE = 15V RG = 27Ω TJ = 125°C 12 40 6 4 14 60 7 3 Energy losses vs Collector Current Transfert Characteristics 70 8 VGE=13V 40 20 0 IC (A) TJ = 125°C 60 TJ=25°C Eoff 50 40 30 4 VGE=15V TJ=125°C RG=27Ω 20 3 10 0 2 10 15 20 25 30 35 40 45 Gate Resistance (ohms) 50 0 55 400 800 1200 1600 VCE (V) IGBT Single Pulse 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) www.microsemi.com 4-8 APT35GT120JU3 – Rev 2 October, 2012 Thermal Impedance (°C/W) maximum Effective Transient Thermal Impedance, Junction to Pulse Duration 0.5 0.9 0.45 0.4 0.7 0.35 0.3 0.5 0.25 0.2 0.3 0.15 0.1 0.1 0.05 0.05 0 0.00001 APT35GT120JU3 www.microsemi.com 5-8 APT35GT120JU3 – Rev 2 October, 2012 Typical Diode Performance Curve www.microsemi.com 6-8 APT35GT120JU3 – Rev 2 October, 2012 APT35GT120JU3 APT35GT120JU3 SOT-227 (ISOTOP®) Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 3.3 (.129) 3.6 (.143) 1.95 (.077) 2.14 (.084) Anode 14.9 (.587) 15.1 (.594) 30.1 (1.185) 30.3 (1.193) Collector * Emitter terminals are shorted internally. Current handling capability is equal for either Emitter terminal. Emitter Gate Dimensions in Millimeters and (Inches) ISOTOP® is a registered trademark of ST Microelectronics NV www.microsemi.com 7-8 APT35GT120JU3 – Rev 2 October, 2012 38.0 (1.496) 38.2 (1.504) APT35GT120JU3 DISCLAIMER The information contained in the document (unless it is publicly available on the Web without access restrictions) is PROPRIETARY AND CONFIDENTIAL information of Microsemi and cannot be copied, published, uploaded, posted, transmitted, distributed or disclosed or used without the express duly signed written consent of Microsemi. If the recipient of this document has entered into a disclosure agreement with Microsemi, then the terms of such Agreement will also apply. This document and the information contained herein may not be modified, by any person other than authorized personnel of Microsemi. No license under any patent, copyright, trade secret or other intellectual property right is granted to or conferred upon you by disclosure or delivery of the information, either expressly, by implication, inducement, estoppels or otherwise. Any license under such intellectual property rights must be approved by Microsemi in writing signed by an officer of Microsemi. Microsemi reserves the right to change the configuration, functionality and performance of its products at anytime without any notice. This product has been subject to limited testing and should not be used in conjunction with lifesupport or other mission-critical equipment or applications. Microsemi assumes no liability whatsoever, and Microsemi disclaims any express or implied warranty, relating to sale and/or use of Microsemi products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Any performance specifications believed to be reliable but are not verified and customer or user must conduct and complete all performance and other testing of this product as well as any user or customers final application. User or customer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the customer’s and user’s responsibility to independently determine suitability of any Microsemi product and to test and verify the same. The information contained herein is provided “AS IS, WHERE IS” and with all faults, and the entire risk associated with such information is entirely with the User. Microsemi specifically disclaims any liability of any kind including for consequential, incidental and punitive damages as well as lost profit. The product is subject to other terms and conditions which can be located on the web at http://www.microsemi.com/legal/tnc.asp Life Support Application Seller's Products are not designed, intended, or authorized for use as components in systems intended for space, aviation, surgical implant into the body, in other applications intended to support or sustain life, or for any other application in which the failure of the Seller's Product could create a situation where personal injury, death or property damage or loss may occur (collectively "Life Support Applications"). Buyer agrees not to use Products in any Life Support Applications and to the extent it does it shall conduct extensive testing of the Product in such applications and further agrees to indemnify and hold Seller, and its officers, employees, subsidiaries, affiliates, agents, sales representatives and distributors harmless against all claims, costs, damages and expenses, and attorneys' fees and costs arising, directly or directly, out of any claims of personal injury, death, damage or otherwise associated with the use of the goods in Life Support Applications, even if such claim includes allegations that Seller was negligent regarding the design or manufacture of the goods. www.microsemi.com 8-8 APT35GT120JU3 – Rev 2 October, 2012 Buyer must notify Seller in writing before using Seller’s Products in Life Support Applications. Seller will study with Buyer alternative solutions to meet Buyer application specification based on Sellers sales conditions applicable for the new proposed specific part.