APT40DQ60BCTG

600V 2x40A APT40DQ60BCT APT40DQ60BCTG* ® *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular TO-247 Package • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • Low Leakage Current • Increased System Power Density • PFC • Avalanche Energy Rated MAXIMUM RATINGS Symbol VR (BCT) TO -24 7 1 1 - Anode 1 2 - Common Cathode Back of Case - Cathode 3 - Anode 2 All Ratings Per Leg: TC = 25°C unless otherwise specified. Characteristic / Test Conditions APT40DQ60BCT(G) UNIT 600 Volts Maximum D.C. Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 111°C, Duty Cycle = 0.5) 40 RMS Forward Current (Square wave, 50% duty) 63 IFSM Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) EAVL Avalanche Energy (1A, 40mH) TL 3 2 Maximum Peak Repetitive Reverse Voltage TJ,TSTG 3 1 VRRM IF(RMS) 2 Amps 320 20 mJ -55 to 175 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V MIN TYP MAX IF = 40A 2.0 2.4 IF = 80A 2.5 IF = 40A, TJ = 125°C 1.7 VR = 600V APT Website - http://www.advancedpower.com Volts 25 VR = 600V, TJ = 125°C 500 36 UNIT µA 8-2005 VF Characteristic / Test Conditions pF 053-4213 Rev C Symbol APT40DQ60BCT(G) DYNAMIC CHARACTERISTICS Symbol Characteristic Test Conditions trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C Reverse Recovery Time Qrr Reverse Recovery Charge IF = 40A, diF/dt = -200A/µs VR = 400V, TC = 125°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM VR = 400V, TC = 25°C Maximum Reverse Recovery Current trr IRRM IF = 40A, diF/dt = -200A/µs IF = 40A, diF/dt = -1000A/µs VR = 400V, TC = 125°C Maximum Reverse Recovery Current MIN TYP MAX UNIT - 22 - 25 - 35 - 3 - 160 ns - 480 nC - 6 - 85 ns - 920 nC - 20 Amps MIN TYP ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC WT Torque Characteristic / Test Conditions Junction-to-Case Thermal Resistance Package Weight MAX UNIT .67 °C/W 0.22 oz 5.9 g Maximum Mounting Torque 10 lb•in 1.1 N•m APT Reserves the right to change, without notice, the specifications and information contained herein. D = 0.9 0.60 0.50 0.7 0.40 0.5 Note: 0.30 0.3 0.20 0.10 0 PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.70 t2 t 0.1 10 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC SINGLE PULSE 0.05 -5 10-4 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL 8-2005 Junction temp (°C) 053-4213 Rev C t1 0.289 0.00448 0.381 0.120 Power (watts) Case temperature (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL TYPICAL PERFORMANCE CURVES 100 80 60 TJ = 125°C 40 TJ = 175°C 20 TJ = 25°C 0.5 1 1.5 2 2.5 3 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage Qrr, REVERSE RECOVERY CHARGE (nC) 1400 T = 125°C J V = 400V R 1200 80A 1000 800 40A 600 400 20A 200 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 20A 100 80 60 40 25 T = 125°C J V = 400V R 15 40A 10 20A 5 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change trr IRRM 0.6 trr 0.4 Duty cycle = 0.5 T = 175°C J 70 Qrr 0.8 80A 20 0 60 IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 1000A/µs) 40A 120 80 1.0 50 40 30 Qrr 0.2 0.0 140 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 1.4 1.2 R 80A 0 IRRM, REVERSE RECOVERY CURRENT (A) 0 T = 125°C J V = 400V 160 20 TJ = -55°C 0 APT40DQ60BCT(G) 180 trr, REVERSE RECOVERY TIME (ns) IF, FORWARD CURRENT (A) 120 20 10 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 180 160 140 120 100 8-2005 80 60 40 20 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-4213 Rev C CJ, JUNCTION CAPACITANCE (pF) 200 APT40DQ60BCT(G) Vr diF /dt Adjust +18V APT40GT60BR 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 1 4 Zero 5 5 Qrr - Area Under the Curve Defined by IRRM and trr. 6 diM/dt - Maximum Rate of Current Increase During the Trailing Portion of trr. 3 2 Figure 10, Diode Reverse Recovery Waveform and Definitions TO-247 Package Outline e1 SAC: Tin, Silver, Copper 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC Common Cathode 3.55 (.138) 3.81 (.150) 4.50 (.177) Max. 8-2005 053-4213 Rev C 5.38 (.212) 6.20 (.244) 20.80 (.819) 21.46 (.845) 0.40 (.016) 0.79 (.031) 2.21 (.087) 2.59 (.102) 19.81 (.780) 20.32 (.800) 6 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) Anode 1 Common Cathode Anode 2 0.25 IRRM Slope = diM/dt